Get OSSC Pro Features On Your OSSC With This Simple Mod

Subscribe for more old PC stuff and future OSSC Pro testing updates! ☝️😁
Looking to breathe new life into your old Open Source Scan Converter? This official mod and firmware adds improved sync handling, improved picture quality, 6x line multiplying, improved compatibility with HDR displays, shadow masks and more!
Support The Channel:
Patreon: / ctrlaltrees
Ko-Fi: ko-fi.com/ctrlaltrees
Relevant Links:
Official Forum Thread: videogameperfection.com/forum...
OSSC Pro PC Test Video: • Testing The OSSC Pro's...
OSSC Pro Atari ST Test Video: • Upscalers vs. Atari ST...
1.x Firmware Downloads: www.infocult.com/m/ossc/fw/v1-...
VIP Superfan Steves & Executive Producers:
Action Retro: / actionretro
Arthur Ludwiczak
BitterBlitter
Endzs
Has Beard, Plays Games: / blcollier
Justin D. Morgan: / jdmcs
Karl Bate
Kevin Leah (AKA Zoinks!)
Laurent
Mark 'Kurbeco' Simpson
MarkCentral
Naokia Saito: / @naokisrc
Peter (Melair)
Ryan Mercer: / @ryanmercer
Simon Green
Steve's Tech Shed: / stevestechshed
stween
The Byte Attic: / @thebyteattic
Tim's Retro Corner: / @timsretrocorner
Vanessaira: / @vanessaira-retro
Socials:
Official ctrl-alt-rees Discord: / discord
Twitter: / ctrl_alt_rees
Instagram: / ctrl.alt.rees
Chapters:
00:00 What's This All About Then?
03:42 Mod HOWTO
05:45 Final Thoughts

[@ctrlaltrees]

FAQs: The hardware mod is not required on the new OSSC 1.8, just install the new firmware. This mod and firmware are compatible with all OSSC versions including the original DVI 1.5 board (with audio mod). Pin 25 of the TVP7002 does not need to be lifted as is sometimes advised elsewhere. The mod is fully reversible and officially endorsed, but may void your warranty if you have one. Unfortunately I can’t offer modding services, but thanks for thinking of me. :)

[@danieladams5379]

Thanks for the clarification on this!

[@erinwiebe7026]

Fantastic, thank you. I hadn't been following the OSSC developments, so this came as a very pleasant surprise. Time to get out the soldering iron! :)

[@MoreFunMakingIt]

Good stuff Rees! I'm certainly going to be doing this to my OSSC. Thanks for the clear and helpful info!

[@ctrlaltrees]

Glad it was helpful!

[@tsbspionkop]

Definitely doing this on mine. Massive respect for pronouncing "solder" correctly 😜

[@KrisGraney]

Hello to you too!

[@thegreatjonzini]

Thanks for doing this Rees been waiting for a video for ages on this upgrade 🥂

[@Soddus.]

your recommended videos list is identical to mine i forgot i was watching this in fullscreen for a moment haahahhahaah

[@WhatHoSnorkers]

Well done sir!

[@root42]

Oh, I didn't know there was a hack for the old OSSC. I only use it with my 486, but it would be nice to upgrade it to the new firmware.

[@Francois_Dupont]

will you think about reviewing some single board retro arcade emulator handheld? like the R36S?

[@paulosmialowski9284]

I've completed this mod on my v1.6 PCB, I've upgraded the firmware (to even newer version, v1.10), and AverMedia LGP2 still does not want to record from 320x200 produced by Amstrad PC2086 and outputed by OSSC, it can only record 640x480, but that was possible even before the OSSC upgrade :(

[@primokarmasilver]

I just want to let you know that I refused to learn anything from this video

[@Mechanix972]

Does this work on the 1.6 version?

[@Mechanix972]

It did work with the OSSC Version 1.6. This fixed every problem I was having. Pretty hyped that it works on my living room tv.

[@nickwallette6201]

Ohhh no. You aren't going to convince me not to buy the new OSSC Pro when it's released. Don't even bother.