CTS Turbo Cold air intake install Audi A4 B8

The CTS turbo cold air intake made an awesome sound and should provide for some extra hp!!
Link to where i bought this kit:
webshop-dvxper...
Do subscribe if you liked my video!
Follow me on social media:
►Instagram: _nielsdm
►Twitter: @_NielsDM

[@lolagaga2174]

Getting one tomorrow for my b8 a4. So excited. Going to use your tutorial. Thanks for the great explanation!

[@stig5763]

Luft technik carbon fiber intake is the best for the b8 A4

[@GuyOhayonGO]

Does it healthy for the engine ? To change for the open filter ? Are it can cause some problem ? Igot the A4 B8 2010

[@lolagaga2174]

GamingGuy if your saying better for engine yes. More air and colder air getting into the engine is better then stock. Only issue is if water gets into the intake while running, but that chance is low if it is stock ride height

[@GuyOhayonGO]

Lola Gaga ty vm I’m just thinking what I can add are change in my A4 without making problems for the car if you got extra tips and ideas I would like to hear :)

[@lolagaga2174]

GamingGuy I would do cold air intake, CT’s turbo blow off valve, and maybe a Cts turbo test pipe.

[@CarlosRomero-wp6th]

My man looked so disappointed of how it sounded 🙂🙂🙂

[@Vitak-st2ko]

Should’ve went with the IE. Way louder !!!

[@andrewjohnsnon2239]

i have the same intake, it sounds wayyy better when driving, when reving in neutral or park you cant really tell the noise difference too much tho

[@brianweigand2965]

Thanks for the video! I ordered one for my Q5 B8 2.0t along with a Becker performance Cat back exhaust! Can’t wait to hear and feel the difference.

[@ProsperbutThrive]

should get the turbo mount delete and a diverter value to make it sound even more louder

[@evanmargherita2112]

Love the vid, great work. Thank you!!!

[@donaldmccormick1584]

Well I just received this product I had to screw the big bolts into the rubber grommets that were on factory box had to use a self-tapping screw to mount the back bracket and I had to cut off about an inch and a half on both sides of the tube so it would line up properly with everything my box did not come with any instructions

[@Shadow438888]

Hey did you get a check engine after installing the intake?

[@Silvercrystalscoukpage]

Very Professional Tutorial, Thanks x

[@force_ffire3349]

Great start of the video but Jesus buddy I’m gonna have a fn aneurism tryna finish this shit horrible after u take the intake off

[@gavezz]

Good explanation. Thank you 💪💪

[@zoegodd1191]

Not sure what you did bro but then bottom bolts are impossible to put in, there is no opening at the bottom to fit anything into it. How the hell did you get them in

[@kannasaki516]

I had the same problem until I figured out there are these little black peg things you have to stick in first. He didnt show or mention them in the video.

[@GRed28]

I just installed mine and broke the SHIT out of that fragile clip on the MAF sensor, so listen to me when I tell you, BE. GENTLE. 🤣

[@jburick9123]

idk what hes talking about i just installed mine yesterday and theres a huge difference my car sounds like a jet🤣

[@Robbyrevz]

Very clear! Thanks

[@edg6779]

You need a blow off valve, I got one but not a cold air intake, it will make a huge difference to sound

[@carlosbanegas8506]

What does that do???

[@edg6779]

@@carlosbanegas8506 instead of your standard diverter valve it vents excess boost to atmosphere. They are about $20 ebay

[@Ofehvghdthewwt]

How’s your car running with blow out valve

[@MySuperCar]

I have a 2l diesel engine with stage1 ~ 187hp do you think there will be any power difference?

[@NIKARTIST89]

What the difference?

[@mauricetrinidad4929]

What's the inlet diameter of the air filter? Want to replace mine as it is perished

[@tcsinthumule3063]

i am so interested on CTS cold air intake...which store to find it here in gauteng

[@danielpan5147]

Great vid...thanks!

[@Matthew-mm7zz]

What’s the difference between CTS and K&N?

[@nielsdm5386]

I don't think there is much of a difference between CTS and K&N. It is both a kone filter with a short rubber hose (for the A4). But in my country the CTS kit is a little cheaper. Around 50euro I believe.

[@kameleonul69]

Can't You give me a link for buyng one for mine pls !?

[@ionutpalau2501]

From below you bought the sports filter

[@paulw.8016]

Iam from Germany, but I have one quastion, is it not bad for the engine, because, it suck the warm air in the motorblock on? Does it do lower HP? Sorry for my English.

[@nielsdm5386]

EU. Pw First of all, your English is good bro! Second: when i’m standing in front of a red light, it will propably suck in some hot air. But when i’m driving it will get cold air. Those black metal plates will guide the cold air to my intake (and block off the hot air) My tuner told me that this air intake should add 5-7hp.

[@paulw.8016]

@@nielsdm5386 all right, thank you. You get an Abo.

[@Xixu.co.6]

These intakes have actually proven to lower intake air temperature. The stock airbox is restrictive on these cars and makes the turbo run inefficiently. The more freely air moves into the turbo, the cooler it will be coming out.

[@thiagoloureirodeazevedo253]

Hey man, your engine is 1.8 or 2.0? and which RIMS are this ones? liked that!

[@MT-mv1be]

2.0 tfsi

[@willbrambley9575]

Hi I have been trying every where for one for my 2014 a4 sline 2ltr diesel.could some one help me to get one.i live in ireland

[@juanc.guarin8277]

What tunes you have? Mine is a 2014 B8.5 with Integrated Engineering stage 1, I’m installing the IE catted downpipe tomorrow and upgrade to stage 2! IE air intake is backlogged, so I found CTS, in my opinion, IE looks higher quality, and is skittle more expensive. At the end , I think both do the same. Would your recommend CTS? Thx!

[@nielsdm5386]

I am on stage 1.5 now( still got the stock cat). I do recommend the CTS. But in my opinion: if you go IE on everything else, i would go the extra and buy the IE intake. It would be easier for them i think to tune the car because they know their products.

[@Bullcat-hl8tt]

You gotta rev it, like REV it

[@homie6080]

Geluid ook veranderd want op de video is het niet echt goed te horen :) Zoja,zwaarder of hoe zou je het kunnen omschrijven?

[@nielsdm5386]

Gho, het geluid klinkt iets zwaarder. Het grootste verschil is dat je uw turbo veel harder hoort. Je hoort hem echt zuigen en spoolen.

[@EJR20]

I think it’s safe to say you bought a not so good cold air intake, because usually when that is upgraded, the difference in sound at the rev stop is literally night and day, but yours had not so much!

[@andrewjohnsnon2239]

i just got the same intake, sounds night and day different when under load and driving, the turbo is wayyyy louder and i have cool blow off and intake noises, when reving in neutral or park the noise difference is not much at all i actually thought mine had no noise difference when i first got done installing and started it, took a drive and the turbo noises blew me away

[@kannasaki516]

@@andrewjohnsnon2239 yeah i just installed mine and the difference is crazy. This video didnt do the sound justice.

[@DuyTran-ml2tp]

Hey bro quick question, do i need to tune the car after i changed the intake?

[@nielsdm5386]

Duy Tran My tuner told me it’s recommended to tune your car afterwards. It had something to do with the readings of your MAF sensor. But it won’t do any harm if you don’t tune it.

[@DuyTran-ml2tp]

Thanks mate. Great video btw, keep upthe good work

[@nielsdm5386]

@@DuyTran-ml2tp Ty man!

[@rocketappliantist4969]

How did you get the lower bolts to the frame on?

[@rocketappliantist4969]

Also where does the heat shield for the turbo bolt on? You showed it on the table but I didn’t see you put it in, nor did you give a detailed look at the engine bay

[@nielsdm5386]

Shakur Yotiiv I couldn’t figure out how to mount to heat shield to the lower frame. Because you could fit the bolt in the hole of the frame but then you could never tighten it up. So i just used some clips to mount the heat shield. And the third heat shield i never used because there was no room for it anymore. But my turbo is blocked of with the bigger heat shield. I think i got a kit that was meant for more that one type of engine.

[@andresmoreno1870]

Does it pass smog with that intake?

[@Woefman88]

Can you send the link where to buy? Thank you 🙏🏻

[@nielsdm5386]

Sure no problem. I bought it at a tuning shop. webshop-dvxperformance.be/cts-turbo-a4a5-20-tfsi-air-intake-system-p-15909.html

[@Woefman88]

NielsDM dankjewel man !!! Heb zelf een 1.8 versie aangeschaft maar vond alleen die van k&n ( 499€ ) dit is 10x beter thx

[@nielsdm5386]

Jeffry Frangez Graag gedaan! Ik heb ook bij dvx performance mijn auto laten tunen. Echt super goede mannen met veel kennis van VAG auto’s 👍

[@abelsaenzquiel8093]

sir, share the link where you bought this kit

[@nielsdm5386]

I made an update in the discription of the video. Ty for watching my video!

[@songokuf4]

Muy buen video

[@jalebia38v66]

Did you disconnect your battery during fitting?

[@nielsdm5386]

gym t No i didn’t. I think there is no need to do this because there is no electricity involved in this job.

[@jalebia38v66]

@@nielsdm5386 ok cool thanks, I just thought the car will throw faults and go crazy while you are disconnecting the filter sensors

[@nielsdm5386]

gym t No faults or anything. Just plug and play 😁

[@Shadow438888]

Hey what size are your rims

[@MS-ri6db]

4 inches

[@samridhisharma5221]

what kind of exhaust do you have?

[@nielsdm5386]

I used to have a custom build exhaust. But that one was to loud and to much drone. Now i have the Milltek exhaust.

[@samridhisharma5221]

NielsDM what exhaust did you have while filming this video?

[@nielsdm5386]

@@samridhisharma5221 It was a custom made exhaust. With no muffler and no resonator.

[@samridhisharma5221]

NielsDM oh okay thanks for the info

[@watchme8097]

2.0 TDI ?

[@nielsdm5386]

Thief Video 2.0tfsi 🙂👌

[@watchme8097]

nice I have 2.0TDI

[@nielsdm5386]

Thief Video Also nice! What mods did you already do?

[@watchme8097]

NielsDM just rs the grill

[@ChaseEverything]

@@watchme8097 I have the 2.0TDI 143 What one is yours?

[@bigred7243]

Is so dirty 🤦🏼‍♂️

[@selenamayvu6939]

He installed it wrong don’t follow this

[@nielsdm5386]

selena may vu What did i do wrong? I would like to know so i can fix it in my car.

[@joefrezza7769]

@@nielsdm5386 hey buddy great video, I just ordered this for my b8 tfsi. Just wondering was this guy right (selena may vu) ? i plan to follow your video for installing mine.

[@nielsdm5386]

@@joefrezza7769 Thx bro! I don't think i installed anything wrong, because my car still runs fine :) I asked him what i did wrong, but i never got an answer.

[@stephenjohn841]

@@zt3xor not possible to keep that flat part on I tried in mine. Think they staged that to make it look good for the pictures

[@m4llo__]

7:38

[@adamlopez907]

I have the same intake it sounds so much better with the resonator and muffler delete, and diverter spacer I have the video posted on my IG @euro.tuner