Cultivator Setup correction I was wrong.

[@valentin.saniuta.po-derevenski]

Интересные ежики! у меня похожи и всеже другие.

[@Firewoodmaninvirgina]

Just swapped mine like the way you say in this video and wow what a difference it made. 👍👍.

[@Jtwes]

I’m sorry about that. I hated I got mixed up. Thank you for hanging in there with me.

[@KrazyKajun602]

Thank you, I will have to check mine also. I have been noticing it hasn't been performing as I thought it should.

[@Jtwes]

Your welcome Wayne.

[@bpcribb]

Thank you. Never used rolling cultivators before and this really helped.

[@hawkinscsa]

Thanks, if i ever find me a set for my old JD320, I'll know how to put them on!

[@farmall51]

I had to look at your video and realized I had my rolling cultivators wrong lol . Thanks

[@Jtwes]

It was one of those deals were I knew better and just said it wrong. So I had to make that correction video. Lol

[@1Coolnorth]

Thank-you for taking the time to explain this! Just bought a Lilliston in pieces and reassembling now.

[@Jtwes]

Any questions just let me know.

[@1Coolnorth]

@@Jtwes Completed connecting two of the cultivators to the toolbar. I have the "flat" side facing the plant row. As I travel forward, the soil is scuttled AWAY from the edge of the row, loosening soil and weeds. Should I actually have the cultivator angled to push the soil toward the row?

[@1Coolnorth]

@@Jtwes Just watched the video where you are cultivating your corn...now I understand the orientation of the cultivator! Changed mine to scuttle the soil toward the row, was looking at the whole setup the wrong way before! Thanks again!

[@Jtwes]

Hey just got in from planting. Yes your right you figured it out. I always say got to put some English on it.

[@davidhelbock1859]

Good Morning, Thanks for your GREAT videos they have helped me a lot Question: Will the Rolling Cultivator Assembly, 4 Gang, 14 1/2 " Spider that are sold by AGRI Supply work on my 140? Thanks for the assistance.

[@Jtwes]

Hey David I don’t see why they wouldn’t. Lot of guys have got them there. You would just need to mount them using the extension arms. Thanks for watching.

[@skd5432]

Excellent detail..... keep it going...

[@Firewoodmaninvirgina]

I bought another super a last week and it came with a set of rolling cultivators, looks like them and my set but the tines was pointed! 🤷‍♂️ not a flat side or a angle.

[@Jtwes]

I’ve seen those but I’m not sure what they called them

[@randybarnes8797]

Thank you. I using them the first time. It’s little information out there telling you have set them up.

[@Jtwes]

Your welcome my friend

[@wesleycallison2079]

I could have used those yesterday to break the crust in my sweet corn patch. Planted 5/11 . Got rain everyday almost ever since. It was thick!

[@Jtwes]

It does do that well.

[@sundownerwhoopwhoop5016]

Hey time will tell when you change them and we’re at our best when we are humble enough to tell others lol I’ve done the same thing

[@tedwpx123]

Thanks good info. Maybe let us see a side by side comparison video of them working

[@Jtwes]

I can tell you I tried a roll of beans and it did throw a lot more dirt

[@robertbarlow6715]

Cool deal.

[@gnc1962]

Hi, I bought a scrap cultivator and it has the spiders like yours but it is a different attachment. Instead of the shank it attaches to about a 3 inch pipe. I want to modify it for my Farmall B. I am looking to fabricate some shanks as shipping for 4 of these to Canada is almost $350 Canadian. I can salvage the base but I am looking for the angle of the shank so I can cut an inch and a 1/4 shaft and weld it on. By chance, would you be able to measure the angle of the shaft to the top of the swivel plate?

[@Jtwes]

Hey G can you maybe take a screenshot and email it to me so we’re on the same page of what you wanted measured. [e-mail]

[@gnc1962]

@@Jtwes Thanks, I sent you an image.

[@waveoglesby2920]

I see one set has a square cultivator clamp and then these you show off the tractor have round cultivator clamps. If you have the round one will they work in the same way you have yours set up on the tractor or do you have to have the square clamps.

[@Jtwes]

Hey Wave they both will do the same job. The round ones are actually Lilliston brand for there two roll cultivators. The square ones are IH Farmall brand.

[@waveoglesby2920]

@@Jtwes so the rounds ones will fit into that square attachment piece on the tractor ok?

[@Jtwes]

Wave I want to make sure we’re talking about the same thing email me at [e-mail] and I’ll give you my phone number

[@amossnowdaharleyman9179]

Found the rolling cultivators at agrisupply but where do I find the mounts for the 140 like you have?

[@Jtwes]

Agri has the stem part that hooks to the frame and Burch store has the bars. He actually has them both.

[@Jtwes]

www.agrisupply.com/ribbed-cultivator-shank/p/83749/

[@amossnowdaharleyman9179]

@@Jtwes Found the mounts on e-bay:listed by burch. Ordered a pair. thanks! Will order the 4 wheel rolling cultivators from agri supply on tuesday.

[@Crowbar47032]

I see your rolling cultivators are 4 tine. AgriSupply has 5 tines as well. Have you used a 5 tine before? Thoughts on what the difference might be?

[@Jtwes]

I have used them . I have a set of five tines and that’s all I used when growing up. If I had to get rid of all my rolling cultivators except one I would keep the 5 tine ones . Be carful not to buy to big of a set. What I mean is the tine diameter. I would think the 14 inch tines would be plenty big enough. My opinion 16 inch tines are to big for a 140.

[@Crowbar47032]

@@Jtwes I appreciate the insight. I sold a 130 my Dad had when the tobacco buyout came through and I regret it to my very soul. I'm in the market for a 140 now and this helps on what to look for.

[@williamjohnson2461]

Where can I find those cultivator shanks?

[@Jtwes]

Agri supply carry’s them but you will have to cut some of the shank off . There super long.

[@williamjohnson2461]

@@Jtwes thanks for the information

[@tannertuner]

And voila! Agri-Supply just put up a video yesterday on how to set them up on their cultivator frame. The rolling cultivator part starts at 3:53 but I swear it looks like it’s throwing dirt away from the row in that short clip. I’m rebuilding an old set now to work with an old international cultivator tool bar I have. We used them for years on the farm. Had a 2 row, 4 row and 6 row. Dad kept the 2 row set when the farm sold 30 years ago. I know for a fact they haven’t been used since the 70s. One of the spider wheels actually turns. By the way, if you need to rebuild a spider gang and are going to need the axle, Agri-Supply is discontinuing the axle. When they sell what they have now, there won’t be anymore. But I found that Lilliston is making them again. kzbin.info/www/bejne/g3SkhZ6Ad9apapo

[@Jtwes]

Thanks tanner . I might need a couple. I stand by the correction video the one you watched. Thanks for watching and commenting.

[@tannertuner]

@@Jtwes get them in person if you can. They’re marked down in the store but not online. And their shipping prices are sky high. I got almost all the parts I needed to rebuild one gang and got home and needed 4 more $2 pieces - the little cheap guards that go around the bearings. Was going to order them but shipping was nearly $20.

[@TammyLatta-pm8cb]

I got the rolling cultivators. But I also have the fingers that go on the front. But I forgot how to put them on. And I don't have anybody else to ask

[@Jtwes]

Hey Tammy I have a video coming out this Thursday with me installing them on the super a.