Cummins Frame Was SMOKED!!! Frame Machine Took All It Had To Bend This Thing Back In Place!!!

[@tonybrinson564]

Nothing more satisfying than strapping a vehicle down on the frame machine and listening to the noises and seeing everything start to come into alignment . The noises are intense.

[@notimegarage8632]

I went to auto body repair school in high school 2nd half of the day, a lady pulled out in front of me leaving school and recked my Dakota, the teacher used my truck on their frame machine to teach the class "how too" was so grateful for that teacher, looked straighter than it ever had😂

[@GRANITEMONUMENT]

And you pocketed the insurance check??

[@notimegarage8632]

@@GRANITEMONUMENT what's insurance?

[@Bwags96]

@@notimegarage8632I mean if she’s at fault it would be her insurance paying you out soo🤣 looks like you missed out on free money

[@chrisherrmann9627]

Very cool to see that being done. Great narration by Justin

[@dereknissen1602]

Body Men are a soon to be endangered species. Dude spews more knowledge in a word than most comprehend.

[@beyondmaintenance]

✌🏽😎 Justin did a fantastic job being the camera stand

[@egglybagelface]

Yall need to start a channel called "Justin explains stuff" he's so good at explaining the work being done

[@brianderkson719]

Thanks for the update on David's truck hope it comes out good for him. Glad to see your business is doing so well I'm happy for you and David. Look forward to seeing what you got in store for the quad cab. Happy Thanksgiving God bless

[@BenjySparky]

JH and Justin y'all rock! John is a beast at what he does. Peace

[@KTMGREG55]

Lmfao. Watchin JH flinch when the frame makes a nasty noise was priceless. Had to rewind it a few times 👌😂🤣😂🤣😂

[@mcmillan1963]

A diamond is usually a good thing, but not when it comes to frames. Tha new JH t shirt should be "if you ain't bendin' you ain't sendin' " . Steve Morris needs one as well.

[@c117ls7]

That frame machine is nuts. It could literally pull a vehicle apart lol

[@terrancegrant5573]

Cant wait to see this gem completely finished .....look good already driving around n everything

[@shammi8133]

I pulled up to a place like this in Dallas. They want me to back my semi down an alley that exact size. I got it all the way until he said now around the corner. I said you want your equipment you need a Hilo or about 20 guys. They got a Hilo from their neighbor.

[@briananderson5284]

Awesome video Thanks for sharing and bringing us along!!! Love the Channel keep up the Amazing Work !!!!!!!

[@nicholassimpson8232]

John's a cool dude he does alot for you and your friends maybe you can repay him by putting him in a crown vic race

[@warrenmichael918]

JH first name is Justin, Justin works for (JH)Justin and Garzas first name is Justin. Justin case anyone was confused

[@memoriesgarage]

This comment was Justin time

[@hpc4839]

Props to JH for not hitting the gate while backing in looking the opposite direction 😂

[@trevorbailey4469]

Can you go over the rachet shifter and how you installed it

[@fatasdat]

That checking tool is called a tremel bar. 😂😂

[@gatorfred8]

Triple J's knicker it out. Saved a truck

[@nicks9795]

I wonder if wheel seals or bearings are prone to going bad after putting that much side pressure on the wheels

[@edwardloose9668]

He's pretty good. We probably could have used two trucks, a big tree , and four chains to straighten it just right.

[@jasonabrahamson6619]

That’s a cool video I always wondered how frame machines work

[@christopherjohnson5320]

anyone else see JH JUMP at 17:11 when frame popped😂😂

[@seannorris8893]

I spy a Ssr😂 I’ll have to take my turboed Ssr to a cleetus event here soon

[@brentrobinson3274]

Trucks looking good let's go

[@jeffsheneman5976]

Back in high school we pulled a car in half with a frame machine as a demonstration

[@jeffomalley6015]

Uncle Chet we need a video.

[@joshshelton796]

Awesome video guys!

[@joshshelton796]

I love that you guys are normal dudes!. Y'all are my mind of people! Awesome video guys!

[@jayburrough4308]

That frame machine was far from maxed out 😂😂😂😂

[@LolPepperGate]

Was gonna say. That thing woulda pulled that rail down to 6" off the ground if it didn't blow a bead on tire or break leaf hanger rivets 😂

[@brent1486]

Wow things cooked surprised it didn’t drive around in a circle 😂

[@caesar1295]

The frame machine bent that frame like a pre cooked pretzel no way it was tapped out. Come on JH. 😂

[@tobindunklebarger4436]

I like that fan...

[@Evanc-se7qi]

If thats still the 2nd gen frame every single 2nd gen I’ve had and worked on with the bed off the rear passenger side frame rail is higher than the driver side. I like to think its a factory design to accommodate torque twist from the diesel. Im talking 1/4in higher nothing insane.

[@MikeAnderson-uj3oo]

I've never had to have any framework done before. What would a job like that cost ?

[@Ole_CornPop]

I'd guess $500 an hour for the machine.

[@Prillium]

It's not quite that extreme. My dad has ran his own collision repair shop for 46 years now. When it comes to frame straightening stuff it's in the $250-$400 an hour range. The low end of that is for jobs not going through insurance companies. He gives people breaks when they pay out of pocket

[@haydencarlson2861]

factory Squarebody frame would bend that much if you lifted it by one tire and then go almost back right away

[@srt8madman727]

My 93 fox body was never the same after the frame was supposedly straightened. The driver's seat was twisted towards the passenger side of the car. It was bad enough that I sold it.

[@JohnRoberts71]

Great content thanks for sharing

[@Robert-jt4xt]

Big shout out to myself for sponsoring this truck LMAO

[@CrL8r]

Axles and wheel bearings are loving life on that machine

[@coryhueske5245]

Only Florida and Texas can a man like that own a body shop. And they do the best work. Other states could learn

[@baldhead7705]

Surprised you didn't smoke his shop out with that truck, lol.

[@pridmore1611]

I'd have had a chain break off a frame machine and go to my garage door at a body shop.

[@wesbarrett9066]

put 95 psi on the right and 40 of left

[@corry685]

Checking for square simple Jesus stuff

[@kerryfilgasjr5757]

Speaking of uncle Chet is he ok and when will he back?

[@hatchetman6962]

You should name it Henry!!! As in Henry FORD F**ked Over Rebuilt Dodge !! 😂 love the channel and I'm excited about the race truck and the mega truck!!

[@colinquiggle5074]

That's so cool

[@loganb5657]

Whatever happened to the duramax drag truck

[@burningbridges9127]

I've been doing body work for 30 years and I never thought of throwing a good heavy blanket over the chain in case it snapped. What a great idea.

[@brianermeling2764]

10ton pull

[@1962markstubson]

Some cool shit JH, now this weekend you can fu…. It up again.

[@colinquiggle5074]

Yo I conduldge but I'm pretty sure that dude is baked hahahaha

[@revee1000]

You can get that frame machine for 5000 to 10000 no problem you might have to replace a pump or a few hydraulic lines

[@KRRZ350]

I was going to say the same thing, lol. New machine is $15k nowhere close to $40k

[@nicholassimpson8232]

Take Chets ranger engine and swap it into something

[@markguerin701]

Funny... they make kits to put the Dodge in chevys and fords but no kits to put fords and chevys in anything ?

[@leekerberskey3121]

Not sure why but why wouldn't you start with something straight on a project like this it comprised my opinion it is no good but enjoyed the awsome effort

[@davidperry970]

Miss seeing Chet tearing up stuff.

[@rogerdodger9712]

Justin, come on man, we know you’re Cheyannes’ son lol

[@andrewogden4168]

Really had to end the video without knowing if the bed fits what a rip off lol

[@rickyxx991]

You can

[@noahcomer4507]

Please make this trrck minty

[@devinjames9168]

The frame guy loves drugs

[@lexPetro240sx]

WaZz up

[@Arcturuseyes]

Can you shout out yourself?! Lol

[@CoyoteWoods-fm3gj]

Thats what a cummins will do to you power and torque baby.

[@ajk374]

No way I'd let a little kid be anywhere close to the chain.

[@ronmiller1162]

everyone watching this thinks that this guy is a genius but let the truth show you that he is not so when you setup and pull a rail like this i never nor have i ever seen a rail get pulled with the tire on the rack and the shock absorber connected because these two points are providing flex and your looking for stabilization so the only thing moving is the rail , so has anyone ever heard of getting there tire and shock squished while the get there frame straightened

[@jonathandavis1996]

Watching jh almost hit 2 vehicles and a gate in the first 5 minutes Is very cringey

[@tylerphillips3243]

Poor engine. Got way to much fuel going to that engine, smokes like a fucking train just idle

[@christianshadrick1150]

Should stay away from junk Chevy's

[@jerrywilcox9890]

Ford and dodge are worse.more so with Ford junk.

[@christianshadrick1150]

@@jerrywilcox9890 Ford and Dodge are better than Chevy

[@avalt0134]

my dad is better than yours@@christianshadrick1150

[@rcwp8110]

Can't afford a dodge ,dodge a Ford 🎉

[@rcwp8110]

Wanna rev it chev it 🎉

[@robes812]

"Huge shout out to myself" LOL

[@corry685]

Can you make like questions for the people to try to remember from the previous episodes and who ever is the first to answer in the comment wins some free merch or something more tangible for the audience to stay tuned btw I love sxs huge launch at glamm8s in the intro happy week till turkey day