So I have to give you applause for how well you walk us through the processes. I find how as we maure and have kids our previous sense of humor just seems creepy like you said.
@Foghorn1173 жыл бұрын
Mad respect! Just like 10k-15k in parts just chilling. Love ittt
@horsetorquesdiesel3 жыл бұрын
Lots of help from great companies!
@dreamsofnails3 жыл бұрын
Badass video now I know how to easily replace the cp3
@horsetorquesdiesel3 жыл бұрын
Wish I could’ve gotten the camera in better but yes very easy job!
@dreamsofnails3 жыл бұрын
@@horsetorquesdiesel the only way would be to rip the intercooler and radiator out and who has time for that 😂😂
@jefffedorvich94233 жыл бұрын
This channel has the old greg alberalla vibes. Like his videos from 3 years ago. Love it. Keep it up
@horsetorquesdiesel3 жыл бұрын
I hope that’s a good thing! Appreciate the support!
@toddmotuelle64743 жыл бұрын
Just stumbled across your channel Josh, glad to see you doing your own vidja's! I'm now a new subscriber. Love what your doing. keep up the good work.
@horsetorquesdiesel3 жыл бұрын
Thank you for the support!
@witcher713 жыл бұрын
Anybody looking to set themselves up with a barring tool, save yourself some money on that long 1/2 drive extension buy cutting a cheap shorty in half and welding a piece of tube or barstock in the middle to whatever length you desire. Your only using it to turn the engine so there's not a ton of force being applied to it.
@horsetorquesdiesel3 жыл бұрын
Not a bad idea!
@Clapped__7.33 жыл бұрын
From all the way from BC Canada- Love the videos dude I am slowly getting my 04.5 Cummins 6speed swap to 1000hp thanks for all the tips and you should get some hoody’s made and sticks 🤘🏻
@horsetorquesdiesel3 жыл бұрын
Working on it now!
@mikestrucks3 жыл бұрын
Awesome video as always Josh 😉🤘🏻
@horsetorquesdiesel3 жыл бұрын
Thanks!
@slowaf12v3 жыл бұрын
Very informative josh!!!
@horsetorquesdiesel3 жыл бұрын
Appreciate it!
@73cjproject3 жыл бұрын
Great video as always! Loving the information and the tips and tricks to help avoid pitfalls. Gotta steer clear of those Chinnnah parts.
@horsetorquesdiesel3 жыл бұрын
China is terrible for QC!
@73cjproject3 жыл бұрын
@@horsetorquesdiesel the reason I will be going with DDP for my injectors. Quality isn't cheap.
@horsetorquesdiesel3 жыл бұрын
@@73cjproject they are a phenomenal company to work with!
@emanuelyoder16683 жыл бұрын
Love the tips and tricks! 🦅🇺🇲
@horsetorquesdiesel3 жыл бұрын
Glad you like them!
@Jayfab793 жыл бұрын
Awesome work.
@horsetorquesdiesel3 жыл бұрын
Thank you
@Scofflaw_k103 жыл бұрын
I go to the Sendit Garage when I wanna send it!
@horsetorquesdiesel3 жыл бұрын
That is a great channel too!
@cpfpv6410 Жыл бұрын
super helpful video!! thank you.
@brandonmckeown58663 жыл бұрын
When I use the baring tool I like to go to tdc then back and forth until find out where all the gear lash out um and I valve lash all the cylinders to the respective length of the exhaust works good for the second fens but cat is off set to the back
@JohnSmith-rl3ti3 жыл бұрын
Hey josh can you film your barring tool setup and post it to insta or something please? I get the basic jist of it I would like to see how you have yours. This will make my life a hell of a lot easier
@horsetorquesdiesel3 жыл бұрын
Yes I’ll Throw it up on the gram!
@JohnSmith-rl3ti3 жыл бұрын
@@horsetorquesdiesel thanks man! Appreciate it
@terrellscaife2411 Жыл бұрын
Very informative video
@bjcoffey51363 жыл бұрын
New sub here! Excellent info and content, keep up the great work!
@horsetorquesdiesel3 жыл бұрын
Thank you, hopefully you enjoy it in the future.
@blakedismuke36563 жыл бұрын
That's why I use digital torque wrench so i don't forget to unload a torque wrench
@stvnmllr3 жыл бұрын
When your done with those parts feel free to send them my way
@horsetorquesdiesel3 жыл бұрын
Hahaha I need them!
@robertturnbull29033 жыл бұрын
Awesome video. Are you gonna build us a transmission?
@horsetorquesdiesel3 жыл бұрын
Yes sir should have some videos shortly!
@mattwood99813 жыл бұрын
"CHIINNA" HAHAHA
@horsetorquesdiesel3 жыл бұрын
All day 😂
@bernhard85403 жыл бұрын
When I see their logo I can't help but think of diamond Dallas page hahaha ddp lol.
@nathanenos25183 жыл бұрын
Awesome video what kind of turbo setup are you planning for? If its a secret I understand lol absolutely love seeing the complete build and look forward to future videos keep up the hard work 💪
If push rods are longer than stock do I have to take the head off and check the depth of the valves and what not?
@bernhard85403 жыл бұрын
I always put a paint marker mark on the rocker adjuster (across the Allen and the nut and the rocker arm itself) after I'm completely done. Then if I have an issue I can see if they moved very easily ❤
@lukestrasser3 жыл бұрын
Josh, I had never seen the leave the exhaust feeler in while setting the intake method. I've lashed a LOT of valves and that's new, BUT I really like it, because, like you, I've screwed it up in the past. What did you do in the Corps? Navy guy here, Semper Fi.
@horsetorquesdiesel3 жыл бұрын
It’s simple things that help sometimes! Party with arty!
@Thedave22243 жыл бұрын
Time the cp3?? I thought a cp3 just supplied pressure to the rail and the ecm/injectors controlled all the timing
@keiferjanz31973 жыл бұрын
They can cause a kinda knock noise. Happens because of where the pistons inside the pump are at in stroke with the relation to when the engine is firing on compression. Some service manuals specify to time them some engine and others do not when dealing with common rail pumps. I personally have never ran into the noise issue but some common rail pumps I’ve done on different engines have been keyed.
@horsetorquesdiesel3 жыл бұрын
What he said above is 100% correct
@ryanbrown9183 жыл бұрын
@@keiferjanz3197 Well done man 👍
@Thedave22243 жыл бұрын
@@keiferjanz3197 well ill be damned lol learning new things about these fancy common rail systems every day thank you and thank you josh much appreciated
@bullast20463 жыл бұрын
Good video... keeps me coming back... out of curiosity, what’s a 3rd gen with 300k miles roughly sell for in your area?
@horsetorquesdiesel3 жыл бұрын
7.5-12k
@rotarypumpdiesel1312 жыл бұрын
How do the stock valve bridges hold up to 100+ lbs springs?
@nasajetpropulsionlaborator8727Ай бұрын
do you have a body lift on this truck? it looks like there is a lot of room above the head
@horsetorquesdieselАй бұрын
No sir it was stock in that video
@nasajetpropulsionlaborator8727Ай бұрын
@@horsetorquesdiesel thanks
@desertchevy3 жыл бұрын
What’s up with that Honda chillin in the back
@horsetorquesdiesel3 жыл бұрын
Thanks Myers CRF450
@compted103 жыл бұрын
Which is more reliable, dual cp3s with splitter cable or 12mm stroker? I would like my tow rig to both be a hot rod and when turned down be reliable for towing.
@horsetorquesdiesel3 жыл бұрын
In today’s performance parts I like the single pump, easier to install, less pulleys. A good dual pump kit is just as reliable, just more moving parts.
@Filzkiiz3 жыл бұрын
👊👍💯 suBB!!😁😊😎👊👍😚👌🤙💯💯!!
@horsetorquesdiesel3 жыл бұрын
Thanks!
@twintibbsdiesel933 жыл бұрын
Do you need a modified fuel rail for up to 1000HP ?
@horsetorquesdiesel3 жыл бұрын
no I have done 1500hp on a stock rail
@jaythacker51603 жыл бұрын
Josh wait till your 43 like I am and to remember companion cylinders just remember they add up to 7. 1 and 6, 2 and 5, 3 and 4.
@horsetorquesdiesel3 жыл бұрын
Not a bad idea either lol!
@jayc59893 жыл бұрын
Can’t thank you enough for posting content like this. Can’t tell you how much this helps!
@horsetorquesdiesel3 жыл бұрын
Glad you like it!
@briangarvey49363 жыл бұрын
Hey Josh thanks for the quick reply on the last message, Quick question I would appreciate your expert opinion on. You mentioned the bridges in the vid but did not go into detail. My 07 6.7 was never apart with 80k my bridge dots are all over the place. I researched for hours and most say don't matter which way they go however the bridge has the dot on one side and that side has an elongated hole. trying to get her together after head studs. Do you put all the dots on the exhaust side? Thanks again this is my new fav channel keep it Bud. My 07 is identical to yours color and all aside from the 6.7 and 68rfe
@horsetorquesdiesel3 жыл бұрын
I do all the dots going towards the exhaust
@diesel_delph97642 жыл бұрын
I’m looking for new injectors and not sure what % I should get I have a 04.5 truck with built trans head studs 165 lift pump and plans for turbo and cam within a year i live around 500’ above sea level I drive the truck a few times a week and pull a boat on the weekend my goal is 550 rwh
@horsetorquesdiesel2 жыл бұрын
15% over or if you want a little room to grow 30%
@diesel_delph97642 жыл бұрын
Ok thank you
@millerwilliamson65673 жыл бұрын
👌🏻👌🏻👌🏻
@agipegi3 жыл бұрын
Nice Josh, keep it up ! Cool videos
@horsetorquesdiesel3 жыл бұрын
Appreciate the support!
@FlyNavyP3C3 жыл бұрын
Doing great work Josh! Cheers!
@horsetorquesdiesel3 жыл бұрын
Thank you sir! 🍻
@PnwTinkerer3 жыл бұрын
Loving the videos !! Well done.
@horsetorquesdiesel3 жыл бұрын
Appreciate it!
@user-el4ii7zq6l3 жыл бұрын
Not sure why I'm watching this I have a 12 valve LOL