Amazing job and place, never heard of a shop letting you do something like that. That's unreal and what a crew to be so generous. Don't even have a truck yet and I know where I want to go when needed.
@JustTruckin4 жыл бұрын
PFeal seriously the best shop you’ll ever find
@joshcook21742 жыл бұрын
What is the name of this shop ? I am in need of some help with my isx 15 cummins ?
@sneakybidder45842 жыл бұрын
This is the type of shop I trust where you can come by and see the job being do as you please so you know for a fact all the parts are being replaced.if a shop won't let you see what's being done, I don't trust them
@hawkdsl4 жыл бұрын
Man that's a big peace of mind know'n she's all new... ready for another million. Years and years ago (87 ish), had a thermo stick on my N14 (400 horse).. back in those days, you got over 210, the motor was toast. Happened TWICE in three months time. It was a long nose freightliner, so the in frame was pretty easy.. two days all it took. Funny to think, but new heads, pistons, and liner kit was only 4-5k.. installed! I still have a couple chewed to the bone pistons from that catastrophe as a reminder... watch those gauges!
@JustTruckin4 жыл бұрын
hawkdsl yeah it’s insane how prices have jumped Great job on the two day WOW
@GrowingWardFamily3 жыл бұрын
That was most organized parts arrangement I’ve ever seen on an engine rebuild. Great idea using a grease marker on all the parts.
@robinmize37122 жыл бұрын
The average cost of an inframe can be difficult to determine, because of many different things, Engine make, is it Detroit, cat, cummins, etc. You may be able to inframe a Detroit series 60 for $6,000, and a ISX, can go up to $35,000 to $40,000. If you reuse your head, reuse your turbo, Or, if you go all out, and replace every sensor, etc. Now, it's been my experience, (yours may differ) the most important thing concerning the inframe, is liner protrusion. It's extremely critical, spend the extra time, to get the liners to the exact same height. Over a million miles is possible, but it's got to be exact.
@ISLANDTRUCKER4 жыл бұрын
Found you through make cents. Getting ready to do my inframe. No smoke coming out the stack, just coolant coming out the reservoir
@JustTruckin4 жыл бұрын
ISLAND TRUCKER I ran for over 8k with the white smoke and burping the overflow. So you should have a little time 🙏🏽 just check your oil constantly to make sure not a lot of coolant is on it 👌🏽 good luck bud
@blackericdenice2 жыл бұрын
A driver @ my company asked for a new Volvo. They bought 3 2021 VNL760 and gave me one. I was pissed until I drove it. They don't rock like buses anymore and if you get one with the Volvo 12.8 engine and the 12 speed tranny. It will pull and drive like butter. My truck has been in the shop 3 times because they can't get the heater to work right. When the cab get to 63 degrees. The heater stop working.
@ze_german29213 жыл бұрын
When you did your In frame, Do you remember how many Hours your truck had? I hear at around 20-25K Hours is when the engine pops. Depending if your truck has an APU it can make a significant difference.
@arthurjock41793 жыл бұрын
That’s great there are still shops that will work on and teach at the same time. I have a neighbor that is a model A expert and he is the same way.
@xman07672 жыл бұрын
Now I know I'm being nosey, but what was the cost for this work?
@LavenderSystem6911 ай бұрын
On a scale of 1 to 10, how bad of an idea would it be to buy a truck for cheap and do the in-frame it needs myself? I got my own numbers and everything now, and I just need my first truck...
@JaGGeR-3 ай бұрын
Im not sure it was necessary to pull the timing cover to do the in frame unless you thought maybe something was lodged in the gears? 🤔
@JustTruckin3 ай бұрын
It’s always common to reseal it if you’re gonna take that much apart
@JaGGeR-3 ай бұрын
True that. I've done in-frames on these where it wasn't necessary (based on the customer). If it was my truck though, yes, I would do it this way, too.
@Uc9uE3pKsS6uQ Жыл бұрын
I miss it to hear (How Much Does it Cost $$$)
@sophiasocal683 жыл бұрын
My 2008 Cummins ISX CM871 is currently in the Cummins shop getting a complete in-frame, one new cam, re using my head and injectors it's costing me just over $28,000 dollars. Would have been over $38,000 with new head and brand new injectors!
@JustTruckin3 жыл бұрын
Wow 😳
@rebarguy40512 жыл бұрын
They seen u coming. Sorry 2 here that.thats way 2 much
@bryanmitchell57282 жыл бұрын
Love your video. I took diesel mechanics in high school . This stuff is fun to watch.
@r.k.studios69728 ай бұрын
Six days,,,,‼️👍🏻 that’s good, ❤ How much this this cost u all together, the rebuild ..?⁉️⁉️⁉️
@JustTruckin8 ай бұрын
$13500 😎🙏🏽
@timmay2k3 жыл бұрын
If it don’t make cents it doesn’t make dollars😎. Classic. I plan on doing my in frame on my Peterbilt 579 paccar at 1.2 million miles. At 940k miles on it runs great still 😎
@JustTruckin3 жыл бұрын
Nice man 😎🙏🏽
@rearspeaker63642 жыл бұрын
you are very lucky with that paccar.
@ivanmadrigal13953 жыл бұрын
HEY Man Blessings could you tell me how much was the VOLVO CUMMIS ENGINE repair cost ? I would appreciate it very much GOD BLESS YOU
@Uc9uE3pKsS6uQ Жыл бұрын
hey bro, Kan you list special tools can not go without ? remove old / install new cylinders tips and tricks will be highly appreciated
@bfamclarkson77242 жыл бұрын
I just did the Same thing to my 2004 International 9900ix Cummins ISX
@matthewbarajas15933 ай бұрын
How many miles you anticipate it lasting w the overhaul or how many you got on it now
@unkjason4 жыл бұрын
Are you saying they let you use all their equipment? Are you and the owner friends? I'm a bit confused.
@1sick88lx13 жыл бұрын
HAGGAI one of the Best in the Business. They’re good friends with my buddy Aaron Tripp out of Michigan 😎😎
@julzwill8213 жыл бұрын
How much did it cost you in parts. Just curious
@Perry-ck1hv4 жыл бұрын
You never did say what it cost??
@noeldoroteo48493 жыл бұрын
Were you a diesel mechanic before truckin? Lol or did you just learn as you go with help from diesel mechanics i would like to learn so stuff before i buy my own tractor so im not going in green maybe any tips that can help.Thanks in advance 🙏🏻
@deerepower337 Жыл бұрын
Glad you got the turpin suburban back on the road
@larrynofilter8462 жыл бұрын
Didn't hear how much it cost ?
@TerraFirmaX4 жыл бұрын
That's pretty cool that they got it done that fast. I'm just taking my time on mine. It'll get fired up this weekend
@JustTruckinWife4 жыл бұрын
The Arizona Homestead Project can’t wait till you’re back on the road ... I did all the work they just fed me all the expertise 🤘🏽😎 awesome place if you’re ever in South ATL .. And Go Cats (alumni 2003)
@TerraFirmaX4 жыл бұрын
@@JustTruckinWife that expertise is priceless, I've spent a great deall of time researching and learning
@JustTruckinWife4 жыл бұрын
The Arizona Homestead Project yes without them there is no way I’d have completed in 6 days ... You’re killing it though can’t wait to see it running
@Drkeoshelljumppers2 жыл бұрын
Be in the same boat soon enough with mine, going through and learning all I can to get it right..... Of girls on her last leg at 1.5 limping it along
@king0cans3 жыл бұрын
My isx dropped 3 valve seats. Rebuild was 24k it only had 300k on her
@bbedwell822 жыл бұрын
What I would give to do an inframe like that. I work for a charter bus company that has very little access when doing that task.
@swtorJayho4 жыл бұрын
Holy heck. Where did you learn to do all of that? Are you a mechanic? I feel so inadequate
@JustTruckin4 жыл бұрын
Would not have been possible without their guidance WONDERFUL people down in GRIFFIN GA “Haggai Diesel”
@myownspiritlevel4 жыл бұрын
Did you rent a bay and tools from those guys? Is that common? Did you have access to an official shop manual?
@JustTruckin4 жыл бұрын
myownspiritlevel I worked outside out of the way until it was required to keep it clean and out of the elements ... they are extremely knowledgeable and have all the tools to use ...
@myownspiritlevel4 жыл бұрын
18wheels2Retire But did you rent the bay and tools?
@JustTruckin4 жыл бұрын
myownspiritlevel If you are mechanically inclined and have the will you can be a working for when they have room
@myownspiritlevel4 жыл бұрын
@@JustTruckin But...did you...rent the bay....and the tools? Give me one "alrightalrightalriiiight" for 'yes' and two "alrightalrightalriiiights" for 'no.' :-D
@JustTruckin4 жыл бұрын
myownspiritlevel didn’t have to rent anything they are willing to help if you are willing to work GREAT PEOPLE
@Leggeddude2 жыл бұрын
Still waiting on how much your hats and t-shirts are ??????
@scoobertjoo3 жыл бұрын
I missed it, what did it cost?
@ojpine76072 жыл бұрын
How many miles you drove before broke down on you???
@robertesposito98713 жыл бұрын
Damn I fell your pain, that looks extremely expensive, good thing you can do that work yourself, your good for another 800K now
@jwg7993 Жыл бұрын
Name and location of that shop please!
@diaryofaotrtrucker66943 жыл бұрын
Can’t get anyone to answer or return calls I just gave up and found a shop in Jville to do the work
@nickspitzer18962 жыл бұрын
6days nice job hey . I got an 07 isx pre dpf i took the oil pan off and we found a broken crankshaft it cracked near the front of engine no metal in the pan its just cracked and still starts . I want to do a rebuild but i dont really have a shop. Cummins rebuild wants like 27000 plus the cost of the crank shaft so 5000 more. You guys gout any other ideas??
@pokerman91084 жыл бұрын
So how much did it cost?
@johnnyenglish39373 жыл бұрын
Dam that's a good price full rebuild and head
@bighands6752 жыл бұрын
This vid came up on recommended vids, gonna miss the ol girl
@tonym1094 жыл бұрын
Mine...older Cummins 5.9L in an KW T300 hydro lock because of the egr cooler sprung a leak
@JustTruckin4 жыл бұрын
Tony M worst feeling when you turn that key
@tyb27024 жыл бұрын
Like your content. Why don’t you go to bmw or Benore and just run South Carolina local. With your ability, it should be easy for you to get some kind of contract worked out if you go to their logistics dept. Just put on your suit and tie brother, and knock on their door!
@JustTruckin4 жыл бұрын
Tyrone B I’ll give that a try once I have 3-5 trucks but for now gonna pay off this rig and start looking for another ... I honestly don’t believe I can get the $800 on 180 miles or $750 on 90 miles like I do out here on the spot 🤷🏽♂️
@Uc9uE3pKsS6uQ Жыл бұрын
hey bro, is UTP In frame kit any good ? thanks!
@JustTruckin Жыл бұрын
The shop I work with does not recommend them, but I’ve heard good and bad
@1558k3 жыл бұрын
What was the cost of the repairs?
@Uc9uE3pKsS6uQ2 жыл бұрын
its secret
@thesamsons96832 жыл бұрын
Only reason I watched the video and he doesn’t say. Won’t watch another of his videos.
@MountedMontersMagazine2 жыл бұрын
That’s what I wanted to know looking to buy a Pete and that’s the first thing I’m doing before I get on the road
@evanwerkhoven70462 жыл бұрын
@@MountedMontersMagazine last inframe I preformed at dealership was about 50k canadain give or take, with a new cylinder head and injectors.
@mile4mile2122 жыл бұрын
Where are you located I want to bring my truck here
@ronharper55153 жыл бұрын
How much did it cost
@arthurbradley56243 жыл бұрын
How much it’s cost to do a inframe on it?
@28hotrods2 жыл бұрын
My favorite engine to work on.
@sukhs13172 жыл бұрын
Hey bud, how much did it cost you to rebuild and where did you get it done?
@JustTruckin2 жыл бұрын
Haggai Diesel Griffin GA
@sukhs13172 жыл бұрын
@@JustTruckin Thanks bro !!
@Tony-th1ww4 жыл бұрын
New sub saw your video on Sami's channel! Keep up the good work
@JustTruckin4 жыл бұрын
Tony Anqud - The Nomad Trucker thank you bud
@Tony-th1ww4 жыл бұрын
@@JustTruckin loving your videos brother
@asmoov2 жыл бұрын
What was the name of this shop again
@JustTruckin2 жыл бұрын
HAGGAI
@asmoov Жыл бұрын
@@JustTruckin thanks
@joshuathomas60073 жыл бұрын
Hey Justin love the channel..Had a question. Can you give me a ball park figure on about what I should be looking to spend on a overhaul for a Cummins ISX15 on a 2014 Peterbilt?
@hoseabenson53413 жыл бұрын
Wondering the same thing.
@outlawtrucker8163 жыл бұрын
Alright justin I'm bringing the fld in . I need some help with the wiring harness
@tonydeese26074 жыл бұрын
Good work there, keep dropping vids please 💪🏾
@JustTruckin4 жыл бұрын
Tony Deese thanks bud I’ll get on here whenever I can 🙏🏽
@Flipping_Assets3 жыл бұрын
what year is your truck in this video?
@billwhite51882 жыл бұрын
What are the break-inn requirements after your rebuild bro?
@leroyforrest120 Жыл бұрын
Where or u guys located at
@JustTruckin Жыл бұрын
Griffin GA
@ericnelson4043 жыл бұрын
I'm currently at 733k how much for an inframe??
@kyleallen18354 жыл бұрын
What was the name of the shop? And where is it located?
@JustTruckin4 жыл бұрын
Haggai Griffin GA
@khaledezzerai66544 жыл бұрын
How much did you pay for the inframe? Thank you
@JustTruckin4 жыл бұрын
13500 bud But I did all the work myself
@arthurbradley56243 жыл бұрын
@@JustTruckin so what it be more then that if you didn’t?
@sophiasocal683 жыл бұрын
@@arthurbradley5624 I had mine rebuilt by Cummins for $28,409.81 I re-used my head and injectors, replaced 1 cam and a bunch of new internals.
@mariooblazny12692 жыл бұрын
What's a rebuild like that cost
@JustTruckin2 жыл бұрын
$30k ish
@truckernickvlogstopics27744 жыл бұрын
Hi, How many miles did it have when you got it? Mine has 669k now cm2250, Haggai is the place to go for sure!
@JustTruckin4 жыл бұрын
TruckerNick AKA Shotgun 821 k
@lakwanwilliams4621 Жыл бұрын
You did a inframe on a Cummins isx?
@willmalloy49403 жыл бұрын
Why are cummins engines being overhauled under 900k? I dont get it.
@JustTruckin3 жыл бұрын
DEF
@rearspeaker63642 жыл бұрын
@@JustTruckin don't forget that DPF in front of it!!
@Andrew47533 жыл бұрын
Jerry and his Family are the Best!!!!
@usaauto762 жыл бұрын
What year is your volvo
@jeffsowers12902 жыл бұрын
I have a 2010 international ProStar with a ISX looking to swap with a 2019 x15 do you know if anyone makes a wiring harness adapter to the cab
@garymay17813 жыл бұрын
Definitley interesting, Good Work!
@luisburgos7683 жыл бұрын
Why did that engine need it an overhaul so early (8××××× miles), I mean, the are supposed last way longer than that
@JustTruckin3 жыл бұрын
Average overhaul age is 700-900 these days
@robinmize37122 жыл бұрын
Any engine made after 2007, had to meet more stringent environmental standards. Some diesel engines manufactured before 2007, had a warranty for 1 million miles. In 2008, trucking was introduced to the DPF, also called, the diesel particulate filter. Now, take about 20 masks, and put them on. You can now feel the effects of what's on your truck. It's can't breathe. So, guess what, Coolant temps go up, and when the DPF is full, we'll just throw some fuel into the exhaust, and burn all that carbon out. And to make it all work, we'll add a bunch of "sensors" to the "sensors" we already have, and, wait, about 10 minutes, because these "sensors" and "filters" are not only extremely expensive, but also extremely hard to change. That's why the older engines are being sought after, A rebuild equals a million miles, or more. The new engines, I've seen guys do a rebuild at 250,000 miles. And be in the shop 70 times, during that 250,000.
@robinmize37122 жыл бұрын
Now, I've heard that some of the newer engines can be "fixed", to go a million miles or more, but that's just something that I heard.😶
@bryancrowe4 жыл бұрын
Where'd you get your parts from?
@TruckerFit19813 жыл бұрын
Cummins in atl
@LumpyNutzZz3 жыл бұрын
What is that tool called at 3:18? Where can I buy it?
@Dilanom3 жыл бұрын
If you don't know what is called you definitely won't know how to use it
@parrott3503 жыл бұрын
Justin, that is one good looking truck ! Liked and subscribed
@jasonanderson85283 жыл бұрын
How many miles did it have when you rebuild it
@blakejustice82123 жыл бұрын
821,000
@BigTruckWreckerMan3 жыл бұрын
Haggai in griffin ga?
@NLD880002 жыл бұрын
Does OEM PARTS = MADE IN CHINA
@Uc9uE3pKsS6uQ Жыл бұрын
I saw cylinder heads new casting on eBay from china
@dcrfittrucker4 жыл бұрын
Does your truck have DEF or is it Deleted?
@JustTruckin4 жыл бұрын
DEF bud
@Dubya9W92 жыл бұрын
So i watched this crap to see " how much does it cost $$$ " and then he doesn't say... waste of time..for anyone wanting to know it can range from 10k to 35k
@madvybztrucking35494 жыл бұрын
where online can i buy oem kit?
@JustTruckin4 жыл бұрын
Haggai Diesel Griffin GA give them a call
@Nathangies2 жыл бұрын
Heard the interstate Mcbee rebuild kits for isx 15 are a good option. Anyone have experience with them?
@kennethobando57552 жыл бұрын
Not on isx, but ive done some on n14 and cat and had good results for at least three years. Cant say after that as I did these for the trucking company i worked for, no longer work there three years later.
@jimmarchman3 жыл бұрын
Okay, I am experienced in driving but am totally dumb in mechanics so I want to ask: Does an inframe rebuild reset the odometer to ZERO?
@buyck503 жыл бұрын
No it doesn’t
@rebarguy40512 жыл бұрын
Only in ur head
@gregoryhelton24082 жыл бұрын
Nope
@ced549303 жыл бұрын
What's the name of the shop?
@JustTruckin3 жыл бұрын
Haggai Diesel Griffin GA
@scottdomangue1916 Жыл бұрын
Those head bolts are a pain in the ass.
@RJ-or8bw3 жыл бұрын
That’s awesome
@saidabdulle45924 жыл бұрын
Is this Geffen, GA shoo
@JustTruckin4 жыл бұрын
Griffin
@andyolive64122 жыл бұрын
Cummins isx has to be most unreliable engines ever
@finis51312 жыл бұрын
hahaha...last year I sold my 05 Volvo with ISX at 1.8 million miles and I know of many others with over 1.2-1.5 million miles running strong..(all pre DPF and DEF,very important)
@kickenitwithscoob4 жыл бұрын
justin man i see you
@JustTruckin4 жыл бұрын
Andrew Mckneely trying to do this thang
@jamesd3693 жыл бұрын
Cummins are junk! 2011-2014. All have same problems.
@Jreddygo Жыл бұрын
You didn’t even talk about the cost at all..!! Wtf change the title to this video dude….shit smfh