Good vid man. I would recommend using a noral rubber trans mount rather than the CEM bush mount. The noise and vibe transfer is terrible with the bush mount. I changed to a Jeep wrangler trans mount and it's sweet now.
@nathan.baxter2 жыл бұрын
Thanks mate! Yeah I took your advice on that one, I picked up a rubber mount for it!
@MatticFX Жыл бұрын
This guy casually has the sickest turbo whistling, terrible diesel, tire burner built on KZbin. Sadly Next month never came
@darnelljackson2160 Жыл бұрын
You had me at "Yank Tank". I had to come and see this.
@NaturalReefing2 жыл бұрын
Engine build in the shed with old man, doesn't get any better than that! Thanks for the video!
@OrlandoBmz2 жыл бұрын
So glad I stumbled upon your video man!! Such great camera work and editing . Really looking forward to seeing this build come together .
@nathan.baxter2 жыл бұрын
Cheers mate, means a lot 🤙🏽
@dangeruss87rs Жыл бұрын
You need more content on this beast the shorts of the build are fucking mint 👌🤙
@willrogers74432 жыл бұрын
Bloody awesome mate hanging out for the next one
@nathan.baxter2 жыл бұрын
Thanks mate appreciate it
@thewhiteloaf2175 Жыл бұрын
Keep posting your KZbin shorts man, I'm so glad I found your channel. I have a profound love for diesel and I'm glad you do too, now let's talk about getting you a 7.3 iron, or one of them new 6.7s, absolutely bulletproof V8 diesels
@nathan.baxter Жыл бұрын
Thanks mate appreciate it! Will try and post more to KZbin!
@ThanksHero Жыл бұрын
There’s a reason no one does PSD swaps 😂
@thewhiteloaf2175 Жыл бұрын
@@ThanksHero a lot of people do...
@FastaFuture2 жыл бұрын
keep it up mate love the video can't wait for more to come
@nathan.baxter2 жыл бұрын
Cheers mate
@SnapOff Жыл бұрын
Make more videos man! I stumbled upon this channel and im already subbed, great content!
@doozy.17112 жыл бұрын
great video bro keen to see her when shes done 👌
@nathan.baxter2 жыл бұрын
Cheers mate appreciate it
@the_mystery9803 Жыл бұрын
nice man, keen to see this thing go
@SlitWalk2 жыл бұрын
keep us updated big dawg! love content from WA yeeew
@RoamLyfe2 жыл бұрын
this is sick dude! well done!
@jessdigs Жыл бұрын
I bet a 4cyl p pump Cummins would have been more than adequate, so props to you for shoehorning a 6cyl In there. Great videos.
@codysmackdown1 Жыл бұрын
U watched a tad too much og shauno and the gang 😂 love it keep up the great work! FROM PA.USA
@johndreyer9730 Жыл бұрын
Would of like to see this build finished
@alex4alexn Жыл бұрын
cant wait for episode 2, new sub here
@carlnewman24 Жыл бұрын
What happened? I just found this, and you've done a Keyser Soze............
@patrickfrankham46002 жыл бұрын
Must've lost the footage of taking the front diff out on the dodgy after some beers
@nathan.baxter2 жыл бұрын
Hahaha we definitely should have filmed that
@WayneStcroix Жыл бұрын
Hey you got the full video of the swap I'm bout to try to do the same but with a Isuzu rodeo
@venumadhava9514 Жыл бұрын
And it ended with episode 1
@darnelljackson2160 Жыл бұрын
I thought you had weight to HP ratio restrictions in OZ. Unless you detune it for inspection and then tune it afterwards.....?
@ports7872 жыл бұрын
Super jealous of your workshop! Where about a are you from in WA?
@nathan.baxter2 жыл бұрын
Just in stoneville mate!
@ports7872 жыл бұрын
@@nathan.baxter ahh ok I’m in moora
@5punkybob Жыл бұрын
Is there a pt2?
@nick_patrol4x4132 жыл бұрын
Any progress mate?
@danafaulhaber334 Жыл бұрын
Awesome build bro.. hopefully yall dealt with that killer dowel rod issue those cummins motors have.. but id assume with the amount of engine work an all the details yall have already dealt with that woulda been figured out aswell but amazing seeing that beautiful engine going in a Nissan patrol.. cant wait to see the rest of the videos..
@KwiiLLjr Жыл бұрын
Killer dowel pin you mean
@BMW-whatever Жыл бұрын
Bro, what's the last status?
@harikili Жыл бұрын
Where is episode two man???
@trueaussie309711 ай бұрын
No episode 2?
@keilfestin46062 жыл бұрын
How much did it all cost you I’m planning to do Cummins conversion
@josephgillera Жыл бұрын
6bt and td42 same transmission?
@harro94472 жыл бұрын
Hey mate really good video, just a quick question how much did all the machining cost for you block and head ?? As I I have just torn down my 6bt and looks like it will need machining and I have been told it will be quite pricey??
@nathan.baxter2 жыл бұрын
Cheers mate, it cost me $450 to bore to oversize, I didn’t get the head machined
@harro94472 жыл бұрын
@@nathan.baxter that's much better that in thought where did you get it done ?? Also what rebuild kit did you use? Thanks
@nathan.baxter2 жыл бұрын
@@harro9447 local shop in Perth, can find the name if you like, I used Rolland from CEM engineering or Matt from Double Duty Diesel for parts
@harro94472 жыл бұрын
@@nathan.baxter nah its allgood in in vic anyway, thanks for your help keen to see yours going 👍
@andrewpeterson7313 Жыл бұрын
Did he say 4l80?
@adisonsweaney828 Жыл бұрын
Where’s episode 2
@derJackistweg2 жыл бұрын
kzbin.info/www/bejne/qJzSgqygps1jb68 Note: There is a difference between soud "dampening" and the reducing of sound by itself, if that makes sense. What you a re doing there is to damp the BODY soud by sampening. This is good. But that is just 1 part of the story. Something like foam will reduce the noice that will be transmitted via air. One always need to do both. The first part (body sound) doe not need to be fully covered, like you did correctly.
@nathan.baxter2 жыл бұрын
Yeah, I did try to find some foam to use but couldn’t see any, is there any you know of?
@stevespatrol2 жыл бұрын
Engineered to run those weights over the front axle??
@nathan.baxter2 жыл бұрын
Yes, they aren’t much heavier than a td42
@stevespatrol2 жыл бұрын
@@nathan.baxter might wanna get a engineer to sign off on that bit
@nathan.baxter2 жыл бұрын
@@stevespatrol just said yes, an engineer has signed off on it, they have done plenty of the same conversions
@dobbsy902 жыл бұрын
how many box's of the pingjing did you need?
@nathan.baxter2 жыл бұрын
Depends how much you do, 2 was heaps
@jewish0332 жыл бұрын
Очень интересно парни! Мало таких интересных проектов с Ниссан патрОл! Сам собираюсь свапнуть Qd32 eti! Тебе удачи!
@simonnovak Жыл бұрын
Cool dude. I suggest you try and talk with more enthusiasm. It really helps grasp people attention. Sick rig dude.
@KwiiLLjr Жыл бұрын
Bite the bullet and buy an airdog 150 5g lift pump there worth every penny and you can turn the fuel up
@30Thirty Жыл бұрын
I cant believe you gave up
@Bigdonfu2 жыл бұрын
why 6bt
@zacsimpson49132 жыл бұрын
I would of kept the Zd
@zacsimpson49132 жыл бұрын
Nah joking looks Sick!! Dream motor
@carlbickle9467 Жыл бұрын
Christ..lucky boy!!having the finances to do this!
@pusscat9017 Жыл бұрын
Might as well cut some 1ton dodge axel's to be beefy enough for the weight and torque