Cummins swap pt.2

Mounting the scr/dpf assembly, hooking things up on the transmission and getting the clutch linkage shortened.

[@uggy7]

Us old retired mechanically challenged excuses for humans admire your work and enjoy your videos alot, thank you. We look forward to the next one. 👍👍🐕🇨🇦

[@greenhorn223]

What a great Fabricator you are. Great Job on your videos and thanks for sharing

[@jerryglen986]

Warren you are definitely NOT a coward. Self made Men are fearless.

[@noseeum6385]

Absolute pleasure to watch you freelance a problem or project; you turn the ponies loose and the ride is a schooling in problem solving.

[@rickytart1028]

Good job Warren. These type jobs are obviously difficult but you are getting it done!!!

[@inmate666]

Just over the Oregon border.must be good ol klamath falls . I remember 50 years ago they still floated logs down the river to the mills.they all slowly closed up one at a time.and there is no falls left in k falls.just a water fountain lsst time i was there.moved to jupiter California bout 40 years ago.

[@bigunone]

I always hate coming in and trying to figure out what the other guy did

[@mikemorse8592]

Love the vids! I know this is an older video but if u haven’t messed with it yet I’d suggest running the original tach if I recall correctly the cm2250’s in Peterbilts interfaces with a cab control unit and the gauges multi plexed from that . The cluster you show looks too old to match that engine just my opinion looks like a hell of job !!!

[@bmw1894]

What you're after for the intake pipe is a V band clamp flange, they're readily available but that size maybe difficult.

[@KT3406E]

That extra gauge cluster you have is out of a 01-05 year model Pete. Good video, keep em coming.

[@westerntruckandtractorrepa1353]

You would be the man that would know. Thanks

[@jackpinesavagerepair1918]

Pulled L10 on my 88 Freighshaker and installed a 855 400 BC with double over 13. Had a wannabe 9spd in it. Hate the 8L. Lots of moving stuff and re-engineering stuff. Built a radiator out of the low flow for the 855

[@blacksmoke5009]

Nice job coming along good! Thanks for sharing bud hope all is well.👍

[@westerntruckandtractorrepa1353]

Thanks Bill, hope everything is well.

[@blueridgeburnouts8265]

Isn't there anything you can't/won't do? To me this project would have me in tears.

[@Justan_Oobie]

Another informative video. Keep up the good work sir.

[@greenhorn223]

What a project do you have for yourself they warren I would hate taking over projects from someone else and never know what they’ve done or what they haven’t done and it’s just a big can of worms !! good luck

[@billyadams9985]

Looks like a pretty cool project

[@danielkennedy7845]

Whew, hell of a project!

[@jackpinesavagerepair1918]

I used my H5 Bucyrus to set engine in Freighshaker. It's on my channel. Also used H5 to replace engine in my 77 4200 IH. Replace 10spd direct with 13 od. Has a 8V71

[@chrise3801]

California is on another level of ridiculousness 😑but good job tho anyways

[@springer3783]

Try the EU if regulation bothers you

[@olspanner]

The right man is on the job, as usual!

[@robertbradford2734]

Excellent video keep on rambling troubleshooting in theorizing I speak it fluently... LOL

[@micahmalm4263]

As always enjoyed thank you

[@JOHNPHUFNAGEL]

Damn I wish I lived closer I would love to help on this project

[@eddiereichel9354]

If you end up doing some cold side turbo work a bead roller is a cheap investment.

[@garykane8829]

Nothing worse than fixing someone else's cob job..gotta love your patience..

[@KPearce57]

I think you got a puzzle to figure out with missing pieces.

[@Robert-nf1di]

I'm glad you know what you doing I would be lost trying to do that

[@mikerule1463]

ever work on a 8616 leeboy paver . no picnic .wiring and hydraulic hoses are a common to maintain and just to keep clean . california would probably ban it

[@GosselinFarmsEdGosselin]

Good ol' CARB... LMAO 🤣😂 😆 And you're licensed in Oregon..... Kate's favorite bill, HB2020 would have cut all our nuts off!!! Bad enough HB2007 made it!!! I know a few people who have had to move their base of operations across the county line to avoid having to pay magical fines or upgrade to newer than 2012 equipment.... And there is not a provision to only upgrade the engines, it's the whole piece of equipment!!! That speed sensor, from what I've experienced, the computer has to have all the damn sensors hooked up and working properly 😪 But maybe they've changed that?? Don't envy you chasing someone else's unfinished project!!!! Been there done that.... Bad enough getting side tracked on your own project and having to figure out where you were and why you did what you did!! Love your videos!!! Unfortunately I don't have much time to watch, so I don't get to watch enough of them 😪 Keep up the good work!!!

[@westerntruckandtractorrepa1353]

Thanks

[@jamesm9766]

Laws like this hurt small businesses

[@duanecreativemachine]

In the future if you need something like that clutch rod a race car type store will have radius rods and heim ends that would work well.

[@scottlundy257]

I am surprised you don't own a lathe and a milling machine for those drill and tapping jobs and what nots.

[@thomasmollet2073]

Nice

[@chuckychuck]

👍🏾👍🏾👍🏾💪🏾💪🏾

[@josift1283]

Hello Warren, I love the videos. I wanna send you a couple tools you might like. How can I go about that?

[@westerntruckandtractorrepa1353]

5127 Altamont Dr Klamath falls, Oregon 97603

[@hiramjonesjr1887]

Looks like you got a big bit of black bird pie

[@chuckpyle1624]

Good work

[@jimhughson5798]

What was your rate in the Navy? Corpsman here.

[@rickytart1028]

Warren said he was a MM Submarine. I was NUC IC Submarine my self.

[@jimhughson5798]

@@rickytart1028 Nukes were a 6 year enlistment in my day. Crow right out of bootcamp. I was great lakes boot, San Diego A school. Vietnam era so only had to do 2 years for the G.I. Bill.

[@jimhughson5798]

@John Chupp I was told be was a bobblehead Machinist Mate. I enjoy watching him tear into dozers

[@vishachahal7597]

Hey man great video, could you do something like this for my truck? Also live in cali and the law is a pain in the A*s. Thanks!

[@dannyyo7948]

good thing you are not cooking other things.. so you have time to work on that pete!!!

[@Lucky4wd4840]

Warrens CARB Glider Kits

[@kenuber4766]

HaHaHa....Damn thats funny

[@jamiecanter4166]

That cummins will serve him well just as good as a cat if not better people make out like Cummins is not good because of the emissions crap

[@JohnVH-diy]

Good job. Anything is possible as long as the customer has enough cash. Tackle one project at a time. I bought a Topkick project that someone stabbed in a mechanical L10. Still have to hook up the tac and temp gauge. Ck out my channel.

[@georgelasala6588]

that's cool

[@devinjaram]

Hey Warren are you going to video you putting that winch on the Cat?

[@westerntruckandtractorrepa1353]

Yes

[@devinjaram]

@@westerntruckandtractorrepa1353 Awesome. Thank you

[@hiramjonesjr1887]

What you doing with the c clamp

[@dgm5186]

As many supposed Republicans would say... if ya don’t like it, you are welcome to leave. Love your videos. Keep em coming!

[@noelhohberger1188]

This will be the first time I've seen the government filter on a truck. I seen alot get taken off though lol

[@prevost8686]

It would all be on there for appearance only if it were my truck. I don’t think Commiefornia tests it for proper operation.

[@tiredoldmechanic1791]

@@prevost8686 The computer tests it.

[@prevost8686]

Tired old mechanic I. Wasn’t aware that they had to be hooked to a computer and function tested. I thought they just visibly looked to see that the system was in place.

[@mataiterapreha]

Just a good old mind fuck! Did they give you the Def level gauge?

[@donald1056]

So your saying in California - if the truck is not Tier 4 then you have to retrofit it to become Tier 4 emissions - your busy but are you making any money

[@westerntruckandtractorrepa1353]

Yes

[@DoRC]

Just put links to the previous vids in the description and tell ppl to watch them...

[@cluckhead1913]

They rebuild your winch and don't paint it? I'd rip that thing apart to see what else they didn't do.

[@ZEROOOOOOOOOOOOOOO00]

With all the work you have and don't have the time to do, why on earth would you take on a mess like this?

[@michealmartin8565]

Did you say pennatratiing oil I thought that was panther piss

[@scottfindlay2625]

All the more reason to wall off California instead of Mexico. LOL, I no longer go to Cal in any way and have turned down hundreds of loads. At least their finally reversing their DEF requirements on off road machinery..

[@carlosgaspar-luna1860]

U need to buy a damn rolling chair so u want be on ur back under them trucks

[@brenthoadley2943]

Did you go to school to become a diesel technician?

[@allanmoulton3745]

You said he did good work and gave credit where it was due, but it looks like he really didn’t do a good job. All these missing parts is a real pain in the ass.

[@nozmoking1]

"Constitution"? What the hell is that? Good God almighty.

[@gfunk4014]

Pro tip: get the hell out of CA and OR before the Commies put ya out of business. We can always use more diesel mechanics in NV and UT. And your taxes, cost of living, and regulations will be much more manageable for a small business owner.

[@gfunk4014]

It’s funny to think that if ya didn’t have a camera you would be simply talking to yourself. Lol.

[@user-km9mg3mp5k]

What's your location?

[@westerntruckandtractorrepa1353]

Shop is in Macdoel, CA .

[@user-km9mg3mp5k]

@@westerntruckandtractorrepa1353 Thanks Warren love your videos.

[@dave0z96]

I’d swap a Cat for a Cummins so long as its a K19 with 750hp and K19s cost to much money so I’d just leave the Cat in . I’d move the hell out of California, what a communist nightmare . Everyone’s going to have to give up their gas powered lawn and garden equipment in that hell hole .

[@TheRcpeople-fz5bt]

I hate working on something that someone has already started

[@motorgrader5]

sad thing is I hear Europe has done away with def (that's who they got the great idea from)because it was doin more harm then good lol. this state is getting so ridiculous.ive just seen and advert about how they wanna use our tax money to clean up cigarette butts....no really....but who cares about our roads, assload of homeless in major cities, and folks getting taxed into poverty. they really need to split this state. state of Jefferson all the way!!

[@smellycar14]

You heard wrong, DEF still in Europe.

[@chadder19k]

That is bull shit that they are forcing that on people!!! It’s a 95 so it should have a 95 motor and nothing newer!! I would say more about California but keeping my mouth shut!!!

[@prevost8686]

There are some pretty good deals on non-emissions vehicles that were running Commiefornia because of the Stalinist legislation coming down the pipeline. A lot of owners are just buying newer equipment as opposed to retrofitting older, high mileage vehicles.

[@xenobam]

wow so mad