Curved Section View Creation [EngSub]_레빗 곡선형 단면도 자동작성

[@HyunWooKim_EnjoyRevit]

Please ask me to Create anything useful for Revit users. I will create one and shrare it If it's useful for many of you. Enjoy. :)

[@carlosmunoz1041]

HyunWoo Kim thank you so much for your workflow, it`s what I was looking for, that is awesome. by the way enjoy your coffee from me

[@HyunWooKim_EnjoyRevit]

Thanks for the coffee :)

[@mateusgrandini5506]

Hey! Thank you very much! It will help a lot, have a great coffee! The only problem I'm having is with the rhythm package. The sections area created, but they didn't go to the sheet. I've seen the other comments where you explain how to solve it, but I have no experience with dynamo and phyton. Do you have a video explaining it? Or do you have/indicate an article on how to solve it? (I'm using Revit 2022) Thanks! :)

[@HyunWooKim_EnjoyRevit]

I've just tested on 2022 and works fine even with Rhythm package error. the package higher than v2020.9.8 will work fine.

[@azry9833]

hi i bought you coffee, all is working fine except to get all the section view into the sheet. can you please help. its urgent. thank you. i tried to download the GeniusLoci package but it is still not working. im stuck with the Sheet to insert Section Views. thanks

[@HyunWooKim_EnjoyRevit]

It works fine for me and others.

[@jeremybowen6269]

Amazing job, and enjoy the coffee.

[@HyunWooKim_EnjoyRevit]

Thanks for the coffee. :)

[@2hunter17]

hi, i manged to create sections but can't select sheet to place them. i installed the latest rythem package. how cani change the input node of sheet selection?

[@HyunWooKim_EnjoyRevit]

Replace the node for selection with the same one in ur dynamo. I don't know why but it works sometimes.

[@slush9585]

hi! would this work in revit 2024?

[@HyunWooKim_EnjoyRevit]

Sure.

[@slush9585]

@@HyunWooKim_EnjoyRevit thank you, i just bought a kofi! i also messaged you on there about a few questions, hope you could help me out

[@林新植-t4n]

I need this script, but I can't pay through your website, do you have any other way to buy it?

[@HyunWooKim_EnjoyRevit]

Sorry. it's not for sale. I send the script to my supporters.

[@vincentyu4369]

Does it only support a single curve or can it support multi-segment curve connections?

[@HyunWooKim_EnjoyRevit]

Supports multiple curves. :)

[@J_Bant]

hi how about only 1 full curved section is this works?

[@HyunWooKim_EnjoyRevit]

Sure, single or mutiple section lines availible at once.

[@felipelemus9989]

Hello Hyun, how are you? The link is broken, perhaps you still have it?

[@HyunWooKim_EnjoyRevit]

it has been fixed.

[@helenejohansen-ln2gw]

Hi! I bought your script but can't get it to work, and I suspect it's because it's not up to date with Revit 2023. Do you have the possibility to update it? T

[@HyunWooKim_EnjoyRevit]

Try it again with python2 package installed.

[@helenejohansen-ln2gw]

Says something about “cant find the list…” and the makes a lot of warnings. But ill try that!

[@mjacob-xe6kf]

I downloaded the script but it can't identify the sheet. You mentioned that "rhythm package necessary" how can I get this rhythm package?

[@HyunWooKim_EnjoyRevit]

U can find using package manager in dynamo

[@npedrinho]

Hey Thank you a lot. I just coffee you ;) By the way, there must be something I might need to address when using survey coordinates no? In my situation, sections are created correctly but the cropbox top and bottom limits are wrong. Very far away from the supposed location. Already tried reseting shared coordinates, but still happening. Thank U.

[@HyunWooKim_EnjoyRevit]

Thanks for ur report. I'll look into it. Thanks for the coffee. :)

[@aureliodirenzo8456]

Hi, I entered all the data correctly but I always get the same error message "Execution completed with errors" Do you have any solution?

[@HyunWooKim_EnjoyRevit]

If you have my script, contact me via Ko-fi.

[@davidorbang7152]

Hi ! I keep get ting the error that nothing is selected. Can u help me out ?

[@АртёмШаталин-щ9п]

Try to select it via Dynamo player or change this node to Select Element, not "Select ElementS"

[@Dr.Rwiena]

Awesome! Can I share the script with some coworkers?

[@HyunWooKim_EnjoyRevit]

Sure. :)

[@Dr.Rwiena]

@@HyunWooKim_EnjoyRevit Thanks!

[@Dr.Rwiena]

Just to be sure, some of them are from other firms.

[@HyunWooKim_EnjoyRevit]

@@Dr.Rwiena more coffee would be great..but it's up to you. :)

[@Dr.Rwiena]

@@HyunWooKim_EnjoyRevit I'll get you some coffee :P

[@dylmoore]

I keep getting errors (run complete with errors) any ideas?

[@dylmoore]

I have rhythm package

[@HyunWooKim_EnjoyRevit]

Problem solved.

[@dylmoore]

@@HyunWooKim_EnjoyRevit perfect thank you

[@balasathiam2385]

My dynamo player doesn’t show curved sections

[@HyunWooKim_EnjoyRevit]

Contact me via ko-fi if u have my script.

[@kasperkorea]

Well done Hyunwoo

[@HyunWooKim_EnjoyRevit]

Oh. Thanks Kasper, btw I sent u an email before.. contact me if u still want to see me.

[@kasperkorea]

​@@HyunWooKim_EnjoyRevit Really? That is peculiar. I never received an e-mail from you. Maybe I accidentally typed in a wrong e-mail address. I would most certainly be happy to meet with you in Korea. Lunch is on me or coffee, whatever you prefer :) My work e-mail is: [e-mail]

[@Bruce-gh8gt]

Hi, Having trouble making a donation?

[@HyunWooKim_EnjoyRevit]

My Account problem has been resolved. Thanks.

[@HoangNguyen-vq4ko]

Nice works guys !!

[@vishalghuge8139]

please update script. showing errors

[@HyunWooKim_EnjoyRevit]

Contact me via Ko-fi messanger if you have my script. Including your situation detail.

[@vishalghuge8139]

@@HyunWooKim_EnjoyRevit Sorry i don't have Ko-fi messenger

[@HyunWooKim_EnjoyRevit]

@@vishalghuge8139 You can use it if you bought me a coffee.

[@HyunWooKim_EnjoyRevit]

@@vishalghuge8139 login Ko-fi, you can't miss it.

[@АртёмШаталин-щ9п]

I was needed to change the input node of sheet selection, there is was some error with finding that node in my library. Probably caused because of different versions of Rhythm packages. But after changing this node, everything works well! Thank you for your great work, you deserved more coffees! Dynamo 2.3 for Revit 2020

[@HyunWooKim_EnjoyRevit]

My pleasure. :) thanks for the coffee

[@PhuongNguyen-zt3hk]

Do you know where to get that curved section tab? Idk why my dynamo player doesn't have that one :(

[@HyunWooKim_EnjoyRevit]

it's my custom code. You can download the code after buying me a coffee. Thank you.

[@muneebraza8350]

This is so great I think others could benefit from learning about it. Can I share your work at our team meeting/with my peers/with my boss, etc.?Thanks for stepping up and getting this done for us. I don’t know what I would do without you.

[@HyunWooKim_EnjoyRevit]

My pleasure :)

[@abrahamnovemmarnus2118]

man you are cool, thanks a lot

[@immi85]

Supper

[@paullieloretan6229]

tjek jy. Maak meer werk vir niks nie.