Custom Coin Minting and Dies - Gold, Silver, Copper, Brass, Pewter, etc...

[@GavinEngel]

Are you still producing Murray Rothbard rounds?

[@brooklynyte4ever]

will do jim.a pleasure writing to you.all the best to you.

[@StarTrooper]

Have you ever though about an incuse design. they are really neat looking.

[@julianthelovingone]

Hi I watched your video and I loved it !!! is there any way that I could put the picture of my Wedding in some let's say 10 silver coins ? ( the one ounce size ) and if so, how much would that cost ? thanks very much

[@NewsNowFortWorth]

can you make me a repilca coin die of us 50 cent piece thats 0.002 bigger then an original? the die can have the words copy on front of coin if need be. to make it legal.

[@osullivaninsuranceagency9879]

If I came up with or had a logo design how much is it for you guys to take it and create a much for it?

[@Arrazi13]

Wow..this video is 9 years ago. How's today.?

[@pnwstacker4991]

Hello, do you also make molds with a design imbedded into the mold for folks? It would be for silver pouring. Thanks

[@saradeshkm]

Can you please tell the die material composition

[@QualitySilverBullion]

What design would you think to incuse? Any design can be incused depending on the artwork and how it is placed in the die.

[@ndhikaatube]

can the dies can be used for gold?

[@shahzadansari76]

Good Job. What software do you work with?

[@QualitySilverBullion]

Watch our video of the minting process: /watch?v=SFSehzdlAhA You will see that the hardest part of the minting process is getting the silver into the "blank" form. I agree with you that for silver bullion investing the design is merely preference, but in actuality the pressing of the design adds VERY LITTLE to the total cost. Then again, we do sell a lot of blanks to other mints around the country.

[@dekonfrost7]

i have some gold i have saved and wanted to make coins about the size of nickels for saving and coining..i saved the gold myself and purified it myself and made a coin last week out of a round piece of shot the way the romans did and i was just wondering what it would cost for a professional set of dies? frankly a few hundred coins that size isn't much and i don't think i could afford to pay someone else for the labor but for the dies i could likely swing it.

[@Jim.Thunda]

Yes Jim, I'm very interested having some 99.999% quarter and half oz custom coins minted or the dies made so l can strike them myself.

[@grillzbytroy8870]

How do I get started with a custom 2 sides die?

[@QualitySilverBullion]

Please send an email to [e-mail], and we can get you set up with that information.

[@dekonfrost7]

if i wanted a set of dies where would i go? do you make them?

[@cleancraft6083]

I have some of those Rothbards! My favorite coin

[@QualitySilverBullion]

We do produce them in custom runs for another company. I will direct message you the link to their website.

[@vikctorrkreedd6418]

Do you make a custom 3.5 inch in diameter coin?

[@GlacierCodfish]

Hey, I would like to put my own design on a silver coin! But I've got some questions for you; Can I send you the finished design in the form of a CAD-program file? Can you make them 38mm diameter? Can you ship to europe? How do you calculate your price?

[@QualitySilverBullion]

Did you want a set of dies for us to stamp coins, or did you want dies for another purpose? We can most certainly help with getting you the dies you need.

[@GSKim-pv5ey]

This video is three years old. Are these services still available?

[@QualitySilverBullion]

Z Kim Yes they are. It is handled slightly different and this link will get you where you need to go: qualitysilverbullion.com/custom-minting/Let us know if we can answer any questions for you.

[@andersonvieirasouza1101]

Hello, can you do Coin Design and Die, can I send you the design?

[@MrPeacelover423]

Thanks for the explanation. Do you guys do colored silver coins as well? Saw some from Australian mint and the RCM in a couple of videos. Is it possible for you guys to make a video on how that stuff is made?

[@QualitySilverBullion]

We do some enameling, but they are for custom orders.

[@QualitySilverBullion]

Sounds exciting, and when you are ready to move forward just let us know. Take Care!

[@NewsNowFortWorth]

can you make me a repilca coin die of us 50 cent piece thats 0.002 bigger then an original? the die can have the words copy on front of coin if need be. to make it legal.

[@skyimports]

hi what process do you use to make the coin die? thanks

[@Rmndeepg]

i also make that 2.5d dies n coins too

[@allengoldenthal6427]

+Rmndeep G You mention you also can make the coin dies. I'd be interested in knowing what you can provide. Do you have a contact?

[@MarkTravisMusicPage]

Rmndeep G do you still do this ?

[@Rmndeepg]

Mark Travis yes

[@QualitySilverBullion]

Thanks for the suggestion. Let us know if you have any other designs in mind. We can't guarantee that we will use them, but we are always up for suggestions.

[@QualitySilverBullion]

I googled that coin and we certainly have the ability to replicate that design on a medallion. Is that something you would like to create your own dies for? Thanks for watching, and let me know if I can be of further service to you.

[@brooklynyte4ever]

hi jim.i would like to make a replica of that coin but in silver 1oz or maybe copper.of course i would like to add little twist of my own design to it.thanks for the great communication.best regards

[@InsulaPecuniae]

Whats the minimum for minting? Ive been wanting my own coin design for a while now

[@causetisnikat]

how do i polish a pewter mini helmet?anybody has any idea?

[@sonuverma2796]

Do you make die on personal design.if your answer yes then give me your contact information

[@rohans3447]

Ashish Shinde hi I want custom coin die can you do it

[@IndianBullionaire]

kzbin.info/www/bejne/fHXJnmWQiZ57ock

[@IndianBullionaire]

Watch this and order your coin! kzbin.info/www/bejne/fHXJnmWQiZ57ock

[@fryair4free]

Hi Jim, how to contact, to get advise and make an order?

[@QualitySilverBullion]

fryair4free Hello and thanks for watching! You can always call us at 1-866-334-4279, or you can go to our website and submit a an inquiry on our contact us page. Do you want to make a custom coin?

[@misstwilightpageant]

I’m looking for someone who can make a replica of a pewter pocket token like some that I had purchased in the past. The place that I ordered over a thousand of these coins no longer carries that particular style in stock. It is a token that has a mustard seed inserted into it. I only want to order if it will look identical to the original. Can you give me some guidance please? This particular token has a VERY sentimental value to me

[@andylevo]

Did you get it? maybe i can help you

[@TheInvisibleOne1026]

How about just selling me blanks without the premimum die cut that ends up costing me more??.

[@brooklynyte4ever]

hi jim.great work again.i am a collector of ottoman coins and have a silver ottoman dollar from egypt called a 20 qirsh.can your company make replicas of this coin and other ottoman coin designs?i would really look forward to doing bizz with your company soon.hope to here from you.thanks

[@jeffreysuzuki3065]

Ron Paul at 1:50

[@QualitySilverBullion]

I just sent you a personal message through YT. Let me know if you need further info.

[@crzyofficial7658]

Interesting, I want to make a silver coin with my logo on it

[@gooring9915]

You haven’t made a video in 3 years

[@crzyofficial7658]

@@gooring9915 unfortunately all my footage was lost, so I never repeated. My logo doesnt have anything to do with youtube really.

[@StarTrooper]

Nothing in mind. i prefer something new not recycled designs. But the Indian $5 gold piece was always a nice design. I've seen silver 1 oz rounds fetch more money because of the incuse design.

[@JustinCiriello]

1700 dollars in fees alone seems a bit high before even buying the silver or gold.

[@BoastfulGhost]

Hollo everyone

[@Trinity8030]

lol the bloopers

[@ustfu]

Thumb up if you want to buy some Ron Paul rounds.

[@jeffreysuzuki3065]

Cool. Screw Apmex!

[@IIIRotor]

What would it cost to get a 1OZ Silver coin made with Jesus on the one side and Satan on the other and saying on one side: Crowd Control, nothing more and on the other side Crowd Control, nothing less