Custom Dynamics Genesis 4 LED Inserts. Install & Overview

Today we take a look at the Custom Dynamics Genesis 4 LED turn signal inserts. I will be installing them on a 2018 Harley Softail Slim. There will be links below! Thanks for watching and please Subscribe!
Custom Dynamics-
www.customdynamics.com/solid-...
Amazon storefront
www.amazon.com/shop/tonycox?r...
Get Lowered Cycles
kzbin.info?redi...
Thanks for Watching!

[@DirtyDeez]

Very nicely done, Tony. The lighting and colors on the video are slick. Seems like a worthwhile investment.

[@TonysGarage]

Thanks Deez! Been working on the lighting for a minute. Thanks again.

[@stephenmazurowski4196]

Totally enjoyed this video on LED lights. Love all your stuff. Love the Slim. Will buy one very soon and incorporate many of your add ons.

[@TonysGarage]

Thanks for the kind words Stephen! Glad they are helpful. Ride safe

[@hrafnaskaisdottir2654]

Thanks Tony! Pretty sure I will be making this change before riding season. Being seen is good!

[@TonysGarage]

Thanks for watching Tina! I agree being seen is a good thing out there on the road. Ride safe!

[@DCyclemoto]

They make great lighting products! Threw the set from my sporty on my Sport Glide and they are going strong. Nicely filmed video! Best part was the o-sh*t. 😂

[@TonysGarage]

Thanks D. Almost cut that out.

[@fililoboesparza5784]

I agree LED light it’s a must if you want to be seen! I went with sigZ led turn signals Front and back. Love them Super bright..🤩👍🏻

[@TonysGarage]

👍

[@tonyj8947]

Nice video Tony, well explained. I just installed the custom dynamics rear LED turn signals part #1156 in amber for my 2020 heritage classic. The lights are plugNplay and are nice and bright. FYI: The only issue with installation was that I had to trim and tuck the rubber gasket in the OEM signal housing for the lens to fit properly. The OEM housing gasket causes the new light to stick out too much and the lens wont fit. The custom dynamics directions do mention and illustrate the possible need to cut the gasket however, in none of their videos they mention or demonstrate the cutting and they should. From a 3 minut job to a 20 minute job because I wanted to carefully cut and tuck the gasket, the bike is brand new.

[@TonysGarage]

Thanks for watching! I didn’t need trim the gaskets at all. Guess it depends on the bike. Congrats on the heritage love that bike👊👊👊

[@colekirschenmann5464]

Thanks Tony! I’ve been wanting to do this but been holding out because I didn’t know how involved this was going to be. I like working on my bike but I don’t enjoy wiring.....lol

[@TonysGarage]

Hey Cole, it is very easy just like changing out a light bulb. Thanks for watching ride safe!

[@OZARKSHDRIDERS]

I agree with ya brother 💯, Custom Dynamics are worth every penny 💯✌️😎

[@TonysGarage]

👍

[@kneesinthebreeze7417]

Nice Video Tony. I got mine from Rogue Rider Industries.

[@TonysGarage]

Thanks for watching Greg! Ride safe

[@TheGearedRaven72]

So jealous! I wish they made those for a HONDA. They look amazing and that was the easiest install I've ever seen. Also, your video quality is sharp as sh*t!!

[@TonysGarage]

Thanks Mary!

[@TheGearedRaven72]

Tony Cox you’re welcome hun!

[@speedie8776]

I just bought a front and rear set. Front being super easy but... the brake lights are not so simple. This is for a 2019 sport glide that already has low end led's from the factory. Edit: Harley sold me the wrong rear set, have to order the correct ones tomorrow.

[@TonysGarage]

Nice, that make a huge difference. Thanks for watching👊

[@speedie8776]

They are killer for sure. Now to wait for the correct leds to come in (clip on connection,not twist and pull)

[@MrWedlake]

Does this work with the 2 or 3 wire Harley bullet signals ? Both are the 1157 bulb.

[@VVoltz]

Reese look nice. Do they make these for the rear as well? My Heritage uses 1156 ones.

[@TonysGarage]

They do, check out their website tons of options for the heritage. www.customdynamics.com/category/led-turn-signals?gclid=CjwKCAiA66_xBRBhEiwAhrMuLeEbF5kmNJjNlYAiA7tCR9tcbbqew1xuDfNqp6uqNjfl_OOAKrGfURoCHlUQAvD_BwE

[@dipack999]

Hi Tony I am riding 2019 softail slim in London England. I was thinking to get these ones for my bike can you please recommend which ones to go for and also that fits UK 🇬🇧 model. Thanks

[@TonysGarage]

All custom dynamics products are great as long as you have 1157 style fixture they should work perfect. I would check out there website just to make sure. Thanks for watching

[@lm4tuna0461]

Hey Tony dynamite video well done! I’m a huge believer in communicating with car drivers while on the blacktop! I’m pretty sure you installed rear led brake lights from the same company on your Slim but I’m having trouble finding it, did you do a video on it? And if not would it be too much trouble to do one? I’m seriously considering getting these lights!

[@TonysGarage]

I do not have one for the rear for my slim but, I do have one on my old sporty. Same install for both bikes. Thanks for watching and ride safe.

[@TonysGarage]

Sportster Iron 883-Custom Dynamics LED Tail Lights-Install &Review kzbin.info/www/bejne/pKuUpZRrrKaiapo. Be easy on me some of my early stuff🤣😂

[@lm4tuna0461]

No worries bud, I’ve been a little hard on you in the past regarding the retaining of nostalgia for the Slim lmao! I promise no judgements!

[@darrinzachary886]

Tony, I have a 2023 Harley Davidson Freewheeler. Will I need a SMART Signal Stabilizer for my bike?

[@ginolopresti2997]

I bought these for my sporty got the front turn signals in but cannot get the back in they just wont go in no matter which way i turn them. What the hell am i doing wrong

[@Ken-hh3zf]

just spent a little over 500.00 for the the turn signal leds front and rear the fender tip leds and the triple play from custom dynamics (this was just the LEDs and the Lens only), Was going to order the headlight and passing leds for 900.00, but when I got my 500.00 order I was shocked to of paid 500.00 for MADE IN CHINA and TAIWAN CRAP....I was positive for this outrageous price I was getting good Made in the USA products.

[@Gpadellaro]

does it require a load equalizer?

[@TonysGarage]

Not on the newer canbus Harleys

[@kneesinthebreeze7417]

Rogue Ridee industries are just a little bit better. They function just like the custom dynamics with one exception when you turn on the turn signals or hazards they blink amber,white,amber white so there is light always on for better visibility. No offense Tony.

[@TonysGarage]

None taken, I will have to check those out. Thanks for watching!

[@dble0seven]

Which is against DOT and makes it hard to distinguish that the bike is actually signaling a turn. Just FYI