Custom Dynamics install LED saddlebag lights

[@RoysMotoVentures]

Nice video. Scary drilling into the bag. LOL. The lights look nice. I also noticed that you have your EZPASS on your bag lid. Does that work good that way? I just got my EZPASS for my bike and was wondering where I am going to put it. I see some peeps put on there windshield, but then you would have to remove every time you are away from the bike.

[@BryTheBiker]

Yes , it works great had zero issues with it.

[@gm2650]

I had mine on the saddlebag lid but found that if I had a passenger it didn't always work. I now have mine under the fairing just above the headlight. Zero issues, no worries about someone jacking it.

[@WDStock_man]

I really like the ideal of running the wires over top of the bags as opposed of drilling two holes.

[@BryTheBiker]

That’s a interesting idea

[@MyDunnLife]

Custom Dynamics is hitting the season hard with lots of my fellow motovloggers adding their products. But I've not heard anyone complain about the quality. Adding these to the side will certainly help make you more visible. Make sure to give us a long term update on how well they hold up with use.

[@BryTheBiker]

Will do. I can say I had zero issue with any of there products on my bike. I will be sure do do an update video

[@05RangerXLT]

Bike looks good. I have those and the bagz sequentials. The video doesn't do them justice how bright they are, worth every penny. Pro tip, haha. When drilling plastic like that, a step drill bit is way easier and more controlled

[@BryTheBiker]

Yeah I should have used a step

[@RidingHumboldtCounty]

Great install Bry. Nothing wrong with drilling on the inside of your saddlebags. I’ve seen several install videos but I think this one was definitely different 👍🤙💯

[@BryTheBiker]

Thanks.

[@BikesBeardsAndBrews]

I use my power drill as well, I normally set it to the lowest setting so nothing is stripped and use a hand tool to loosed and tighten. Bags are lookin sweet man!

[@BryTheBiker]

Thanks I’m really happy with them.

[@wyomoto1349]

Thank you for this video. My bike got wrecked a couple weeks ago, all the bag is savable except this factory piece. SO.. upgrade it is lol

[@BryTheBiker]

Nice

[@TobyNorthEN]

16:00 - Holee crap Bry!!! The underside of your seat looks like mine!!! 😂😂😂😂 #spiderweb #spaghettijunction The only recommendation I have (for future use) is to consider painter's tape before any drilling. I think I Broncoride used it...but I may be mistaken. The lights look GREAT!!!!!!

[@BryTheBiker]

And I will be adding even more. I forgot just how much stuff was under there lol

[@MisplacedMotoVlogger]

Cool install, drilling into those mags would certainly make me nervous.

[@BryTheBiker]

Thanks. Yes it was a bit stressful but after doing one it was easy easy to do. I love the added side lighting.

[@Tryke_Ryder]

A step drill bit would be a good tool for the drilling of the hole. Good video. 👍

[@BryTheBiker]

Thanks and yes the step bit would have been better. Thanks for watching.

[@Hard_Luck_Harold]

Another great video Bry.

[@BryTheBiker]

Thank you sir

[@mikenorton8588]

Nice job !

[@BryTheBiker]

Thank you

[@NVARider]

Nice easy install. Lights look great!

[@BryTheBiker]

Thank you! I really like how they turned out.

[@FLYANDRIDE15]

Great install video! I have the prior version on my bike and absolutely love them! Bright as heck too! 🤙

[@BryTheBiker]

Thanks. I’m really happy with them.

[@middletennesseeconcrete3673]

Great stuff as usual buddy 👍.

[@BryTheBiker]

Thank you sir

[@darksoulscorner]

Awesome 😎😎

[@BryTheBiker]

They are really nice.

[@HarleyFatBoyJr]

And that Dixxon is 🔥

[@BryTheBiker]

Yeah buddy it is. I need more :-)

[@602North]

Great job Bry and it really looks good.

[@BryTheBiker]

Thank you! I’m really happy with how they look.

[@Setzerpendence]

"I apologize i have a lot of custom dynamics lights on this bike" LMAO

[@BryTheBiker]

:-)

[@HarleyFatBoyJr]

Great video bro. Awesome install. Lights look pretty damn good. Makes me wanna get a bagger. 🤷🏽‍♂️😂

[@BryTheBiker]

Thank you!!! You need a bagger! You will never go back!

[@HarleyFatBoyJr]

@@BryTheBiker lol

[@funhumanusa]

Good job. I want these but hate the idea of drilling holes in the bags. I am curious why not create a tiny notch in the top lip of the bag and run the wire to exit? I do not think pinching would be an issue.

[@BryTheBiker]

the drill went fine just takes a bit of time.

[@HarleyFatBoyJr]

🔥🔥🔥🔥

[@BryTheBiker]

😎😎😎😎😎

[@HarleyFatBoyJr]

Let’s go

[@BryTheBiker]

Heck yeah!!!

[@JunkyardDadski]

When I grow up, I can't wait to have a bike with hard saddlebags! Until then, I will remain a small fry.

[@BryTheBiker]

Lol, you will be ruined for life once you get. Bags and a top box.

[@joemaccrory8121]

question - does your ez-pass work mounted on the top of your bag lid? i actually have mine in an old flip phone case and put a mount on my bars. i only pull it out when i'm riding where i will run into tolls. your mount is much better because its a stick it and forget it. do you ever find it doesnt pick up your device when you go thru a toll ?

[@BryTheBiker]

It works every time. I had it on my windshield and lost it at 65 mph. This has been flawless since I put it on two years ago.

[@joemaccrory8121]

@@BryTheBiker i'll have to give that a try. looks like a great spot out of the way and i wont have to worry about pulling it out and mounting it on my bars like i do now.

[@BryTheBiker]

@@joemaccrory8121 Hope it helps I need to do a quick video on it as ever since thsi video I get that question a lot.

[@Combatinho]

I think that this is the worst way of installing this light. Go behind the light with a small hole after depinning the connector, then on the motorcycle side drill a smaller hole and get a smaller grommet and re-pin on the outside of the bag.

[@jameswilbur1273]

Will they work with the magic strobe module?

[@BryTheBiker]

Yes they will work.