I have an update for you on my Custom Recaro seats and need help deciding how to customize s550 seats to install in my Fox Body. www.417fox.com
Пікірлер: 39
@wadestewart9015 ай бұрын
Hey, thanks for that Bezel! I've never considered custom seats! That's awesome!
@Staytuned4055 ай бұрын
i like the all grey idea with red stitching. It would be cool if you could have your logo on the seat back or the headrest!
@corneliuspace69816 сағат бұрын
Be sure to convert the heat and cooling feature on the seat to a standalone switch if you can. Can you do a video on how you secured the seat in the car, any fab that is required?
@BasinMotorsports5 ай бұрын
Go with a gray vinyl on the sides. Alcantara is fine, or you could potentially source the original fabric for the inserts to keep it consistent with the original intent. Red top stitching would match the exterior color well.
@dmh13675 ай бұрын
You're a legend bud! Full of great ideas! Can't wait to order my kit. Can you make a calypso colored stang in the hat??
@brokentoolgarage86095 ай бұрын
Black bolsters with titanium grey inserts and all black stitching.
@skinneyjay54515 ай бұрын
I think Grey leather with the red alcentera center with matching door insert but needs Ford logo or stripe in black or black stitching.
@417fox5 ай бұрын
🤔
@rr1226085 ай бұрын
I would do a combination of black leather on the sides, cloth in the middle, and red stitching. 😬 ❤
@stephenmiller57005 ай бұрын
Maybe couple shades of black . Different materials like that idea then do upper door panel insert to match
@out_foxed_gt5 ай бұрын
Save the money on the leather and get the 417 Fox logo embroidered on the headrest 🤘🏻😀🤘🏻
@417fox5 ай бұрын
This is one thing I am seriously debating. I might have him make me an extra set with the logo. Not that I ever plan to sell the car but if I did I would have a set without too
@out_foxed_gt5 ай бұрын
I am looking into it myself not your logo mine lol And I’m still waiting to get the design back to send you for the T-shirts. I’ll text you as soon as I get it.
@Joeshomegarage5 ай бұрын
My CTS-V had alcentera it's really nice. I would do grey and black mixture with red stitching. The car is so red doing red alcentera inserts would seem too much and probably really hard to match. I removed the door pockets on my car and covered the lower panel with suede off Amazon and wrapped the dash pad. It looks decent. Now I need more to do the rear deck panel in my notch.
@robertrobinson45785 ай бұрын
Yes!!! I’m in the same situation. Been trying to get to decide which seats to use and mostly that’s because of the color. The car I’m putting the seats in is a black GT with scarlet red interior. I have the s550 seats that I bought for my other car but haven’t installed due to mounting issues. Basically, yes you can make them fit, but I’m 6’2” with long legs. I like my seats low and far back so my legs aren’t up in the steering wheel. Can you (or have you already) made a video showing how you mounted the s550 seats? As for the color combo on the seats, I’ve been feeling the black/red plaid that’s common in VW’s and being used on some recaros now. I think that material for the inserts, and then red stitching to tie it in with the titanium
@jamesmcpherson88685 ай бұрын
@staytuned405 good idea of the 417fox logo. I would do the red center gray outer.
@billkitchens-hn1sc5 ай бұрын
Grey and black would look good with interior.
@blainmcdevitt24955 ай бұрын
Maybe like John’s where the back is black then titanium on the sides with black alcentra in the middle with some kind of red stripe or design to tie it in? Or maybe red stitching
@VelocityProjects1015 ай бұрын
If you do leather, don’t do black on the outside edges because as it ages and wears in, the lines become more noticeable in black than any other color. High quality leather still develops creases. My .02. Dark red center, gray sides and black stitches.
@Andersonz_5 ай бұрын
I’m 6’3 300lbs and sit much better in my Recaro LXB than S550 cloth seats in my fox. Both had/have custom brackets to sit lower and farther back than factory.
@mikefrakes19835 ай бұрын
Personally i really like a 2 tone all black with hints of red . Love red cars and u already have a red paint and black wheels theme going on so i think it would be to ur benefit to redue the interior completely with all black mixed with red 2 tone interior ….just sick all the way around and it will match perfectly with the outside of the car .
@mikefrakes19835 ай бұрын
I used the lmr interior paint to do my interior and its turning out great ! I think next time i would do the sem interior black paint as i think it goes on easier .
@user-nt5jf6tq6n5 ай бұрын
Maybe black leather on the bolsters with red alcentera in the center and red stitching…..
@ericridout615 ай бұрын
black leather on bolster. Alcaterra in titanium center with a red stitch. Wanna class it up do a double diamond stitch in red. I have it on my 23 gmc.
@mrupholsteryman5 ай бұрын
I would say this....IF you do leather or any other material for that matter....perforated holes are like head starts for rips. Like perforated paper...tears along the line.
@417fox5 ай бұрын
Thanks for the feedback
@mrupholsteryman5 ай бұрын
@@417fox I used to do auto upholstery work YEARS ago...and a lot of the seat repairs were perforated leather as well as seat heater malfunctions and cigarette burns and the outer bolster getting beat up cuz that is the one that gets the most traffic. I would also say that leather needs to be taken care of...cuz when it gets dry and brittle it can crack..but...you probably already know this.
@seeunow445 ай бұрын
Remove the baggy door satchels and cover it with the corresponding door panel color
@stephenmiller57005 ай бұрын
So you can't find local vs sending overseas? What's the gain of sending overseas.
@richardgillespieiii51515 ай бұрын
Red middle and red stich.
@seeunow445 ай бұрын
Leather all the way! Depending on price difference!
@stephenmiller57005 ай бұрын
No red
@russellmartin96205 ай бұрын
What seat tracks do you use with the 550s?
@417fox5 ай бұрын
I am going to modify my floor and use the s550 tracks. Previously I had used stock fox tracks and welded them to the s550 frame with angle
@seeunow445 ай бұрын
Is there a required modification of seat brackets as before?
@417fox5 ай бұрын
Yes
@Joeshomegarage5 ай бұрын
My car had S550 seats in it and instead of modifying the tracks he just drilled holes through the floor and the seats sat too high so I went with stock seats.
@stephenmiller57005 ай бұрын
Add seat heaters while you at it
@JDiaz-ng8gr2 ай бұрын
Hey bro just out of curiousity which one is his real Instagram?