Custom Jeep Chassis Built In 2 Days!

[@danielkingery2894]

Awesome vid Sam. The buyer of that Jeep is gonna be happy w/the upgrade.😎 Only thing I'd add is a few small diameter 'drain' holes in the bottom of the frame and spray in some 'cavity wax' to hold off the ol' rustolation for a good bit longer.

[@bachmannsgarage7637]

For sure! We are going to drill the holes for the motor mounts, cap off the ends of the rails, make some drain holes at lower points in the frame, and use 3M Cavity Wax. Oh, and then some black paint!

[@willieshaw2522]

One of the most common upgrades we did to Jeeps - or any similar chassis - was to swap the front spring hangers, so the solid pivot was in the front and the shackle was in the rear.

[@bachmannsgarage7637]

Good to know, thanks!

[@bachmannsgarage7637]

For anyone concerned about structural stability, please watch the part two episode out now. Thank you.

[@tedcruz6059]

It will crack you ground most of the weld off. The welds were burned in so hot you didn't need gloves. Fab work looks good.

[@chuckhooper5215]

Inspired

[@danielharper8501]

Is it just me or are you the joker from Batman?

[@bachmannsgarage7637]

Which movie/joker are we talking? Jack Nicholson is my personal favorite.

[@charlesboetel1324]

Needs fishplates at the welded but joints

[@RuioNasan]

ทวีปยุโรปไม้เนื้อดำแข็งเนื้อแดงดี

[@diggityfresh1650]

I like how the guy filming has welding gloves but the guy welding doesn't.

[@Interdiction]

C girder chassis would be superior

[@RuioNasan]

ไม้เนื้อแข็งทำรถยนต์ได้

[@dlansburg2673]

Most definitely think and never do! Nice job,kinda junkie shop lol

[@EmilianoVazquez-y1s]

Ese chasis no tiene torcion es todo rígido . Se van a fisurar las soldaduras

[@velomolo]

Los chasis de toyota tambien son tubulares, trabajan menos

[@bustersmith5569]

Nothing wrong with that frame ......butchers,,,,

[@95ZR580]

That's what I was thinking. Looked mint compared to the frames here in new england!

[@bustersmith5569]

My 98 and my 86 jeep both frames are shot,,, I would kill to have a jeep frame thrat nice ,,,,,