Custom (PAC) Pioneer Arms Corp. AK-47 Hellpup Pistol Variant

[@yamomsass1263]

I just bought a hellpup looking to add accessories

[@GunsmithBeard]

The accessories on this one are high dollar and worth every penny!

[@Mr.ViceVIP]

Do you think this handguard would work on a 556 hellpup??

[@GunsmithBeard]

I do love the handguard but I’m not sure on the 74’s. If you ever have a question like that, and you’re not sure you can always call the manufacturer. I’ve called them a couple times for fitment questions. They were really awesome. Great customer service.

[@anthony-ze6fc]

MAGPUL ZHUKOV AK HANDGUARD, AK47/AK74 will this fit on my hell pup am-47 pistol ?

[@GunsmithBeard]

To be honest, I’ve seen guys use that furniture. www.guns.com/firearms/handguns/semi-auto/pioneer-arms-corp-hellpup-7-62x39mm-30-rounds-11-5-barrel-used?p=1330737&soldout=1

[@Smoove-le5gi]

Is the 1913 rail installed under the pistol grip or did you have to drill into the back to install it ?

[@GunsmithBeard]

Under the pistol grip.

[@FADOJUICE]

Fire Build dawg , and aye you can get the that brace now

[@GunsmithBeard]

Thank you! One of my favorite shorties now!

[@dawhitecastle]

So wait we can or can’t use braces? My gun shop said you can. Hmmm

[@GunsmithBeard]

You can now…. until that changes.

[@navrhy3075]

Check my build out! I have the same gun

[@GunsmithBeard]

OK, I see you!!! that’s a pretty sweet build, I’m not gonna lie! 🤙🏼🔥

[@storytimedavidcollins2897]

Just an FYI Way too long of a video for today’s attention span. And if you want to have all of your 2nd amendment rights restored? There is only one choice. 🇺🇸🇺🇸 Trump 2024 🇺🇸🇺🇸

[@GunsmithBeard]

Well, thank you for the feedback.

[@anthony-ze6fc]

Can someone teach me how to install a hand guard to the front of my hell pup polish AK ?!!

[@GunsmithBeard]

What handguard are you trying to install?

[@bronzeguy9839]

All my AK’s have TWS top covers and SLR Rifleworks handguards & gas tubes. Definitely some of the best AK upgrades on the market.

[@GunsmithBeard]

Right on!! I love their parts! Very High end!

[@GunGuru7790]

Great looking gun

[@GunsmithBeard]

Thank you 🙏🏼

[@royalsKC1]

Hey boss did you get all these parts on one site or multiple sites?

[@GunsmithBeard]

Most of the parts came from Brownells. There were a few parts I had to go directly to the source of the manufacturer.

[@royalsKC1]

@@GunsmithBeard appreciate it man

[@sebastienleblanc2708]

Drum magazine s...

[@GunsmithBeard]

Drum mags are a lot of fun!

[@sebastienleblanc2708]

Nice... Ukraine could use some... Never know... AKs an sks s are not very manouverable an not very stable... Cbq close range is good for short bursts...

[@GunsmithBeard]

Thanks for the info

[@Who_tf_cares420]

I just got a hellpup but every brace made for it is out of stock everywhere

[@GunsmithBeard]

Take a look at this one: www.cncwarrior.com/AK-Saiga-Sidefolding-Armbrace-p/29380.htm

[@anthony-ze6fc]

Wow that was perfect thank you so much for your help and patience

[@GunsmithBeard]

You’re welcome 😊 I love doing these and if I can help I 100% will.

[@lionruntz]

This just the video I was looking for haha

[@GunsmithBeard]

If you’re in the AK’s I’ll have some really cool stuff coming this year.

[@8BloodyKnuckles]

Was looking up info for furniture. Glad the algorithm sent me your way. Good info and thanks for listing the items in the description.

[@GunsmithBeard]

Glad it was helpful! I tried to hook you guys up with the parts that I use so if you guys like it and want to try it, then you have the information you need to order it. Sometimes it’s frustrating when you see a part, but then there’s no information about it and have no idea where to find it.

[@jamesmoss2540]

I’ve got a pioneer hell pup I’m wanting to put PSA wood furniture on but I want that railed gas tube on top, do you think that would still work? Also I’ve heard they lifted the ban for now on the pistol braces… hopefully it stays that way lol 😬

[@GunsmithBeard]

I did hear about pistol braces being legal again due to the national injunction. As for the upgraded gas tube with the 1913 rail…it might require fitting but most of the time it’s minor or none at all.

[@jamesmoss2540]

@@GunsmithBeard okay awesome I’ll give it a try thank you!

[@MikeKubacki-sj1cm]

Did you replace the trunion to accept a brace?

[@GunsmithBeard]

No, before I ordered a special brace from CNC Warriors that didn’t require that! To be honest, they’re a little costly, but it’s worth the money.

[@anthony-ze6fc]

I am trying to install a upper and lower front hand rail to my AK hell pup

[@GunsmithBeard]

What brand?

[@anthony-ze6fc]

Hell pup AK-47

[@123karismith]

That's a crazy rail! Nice gat.

[@GunsmithBeard]

It sure is! I really love it and how well it was made.

[@GunGuru7790]

Does the dust cover coverwhere the iron sights would be?

[@GunsmithBeard]

Technically, you lose the rear side but there is a rear site that you can add on. I’ve seen several guys run it and it co-witnesses with the front side perfectly. But most guys are an optic so the irons aren’t really effective anymore.

[@debrawhitaker-sz5sx]

This is the funniest and best video yet.

[@GunsmithBeard]

I just left the bloopers in this one.... glad you laughed as hard as I did.

[@MarketingPowerhouse]

Dude stop shaking the gun!

[@GunsmithBeard]

Hahahaha 😂👊🏼

[@holinessorhell1964]

Subbed bearded brother

[@GunsmithBeard]

Thank you 👊🏼

[@MadHatterHerby]

Very very sick Hellpup. I love mine. Im subscribed and will be buying that dustcover!!! I've literally been looking for a year. So hard to find HP parts.

[@GunsmithBeard]

Thanks for the sub! And your dope feedback! 🤙🏼

[@bigspiket.v.6626]

ARE YOU FAMILIAR WITH THE KNS PISTON?? IF SO WHICH ONE SHOULD I USE FOR A POLISH HELLPUP CHAMBERED IN (7.62)???

[@GunsmithBeard]

I am familiar. I have to do some research on that when I get back to you.

[@GunsmithBeard]

The hole distance is roughly 6.50mm and the working length is 120.00mm knsprecisioninc.com/content/AdjustableGasPistonUserManualV3PDF.pdf

[@bigspiket.v.6626]

@@GunsmithBeard THANK YOU SO MUCH BIG BRO WISH I HAD YOU AROUND MORE OFTEN THANKS FOR THE INFO WHICH KNS MODEL SHOULD I CHOOSE??🤔

[@tecmoney6568]

🔥🔥🔥 just subbed.... I've been looking to change up my hellpup ...🫡✊🏾💪🏾💯

[@GunsmithBeard]

There’s gonna be a new video coming real soon on this gun… you might like the upgrade! 🤙🏼

[@tecmoney6568]

@@GunsmithBeard copy that🫡💯

[@bigspiket.v.6626]

WHAT YEAR DID THEY FORGE THE TRUNIONS ON THE HELLPUP???

[@GunsmithBeard]

Pioneer Arms is known for making inexpensive AKs. Part of that lower price has to do with their cast trunnions. However, they build a lot of full-auto guns for militaries, and use the exact same cast trunnions in those guns. Without any reported problems. The way they accomplish this is a manufacturing process for their trunnions far better than what you’ll see with most cast metalwork.

[@bigspiket.v.6626]

@@GunsmithBeard YEAH BUT WHAT YEAR DID THEY FORGE THE HELLPUP???

[@habibifather7681]

​@@bigspiket.v.6626I believe it's recently. it's known as the forged line.

[@bigspiket.v.6626]

@@habibifather7681 I HEARD IT WAS 2020 JUST WANTED TO BE SURE, THANKS BRO💯