Masking paint patterns and some of the steps in a custom Flake and Candy paint job on a 1:25 scale, 69 Cadillac. Painted by Dan D.
Пікірлер: 75
@ableaquariums54805 ай бұрын
Fantastic! Thanks for sharing. Please make more videos on the techniques of you can. There are a million videos on painting model car but so few on these low rider paint styles. A series the whole way through a paint project would be great. Thanks again. Looks brilliant.
@theintake89614 ай бұрын
Beautiful work Dan! Incredible patience! 😎👍
@DanDModels4 ай бұрын
Thank you 👍
@benmisner64575 ай бұрын
Had to comment again at the end of the video once again amazing sir
@DanDModels5 ай бұрын
Thank you! 👍
@mrupscale5 ай бұрын
Great job! that is some amazing paint work for sure!
@DanDModels5 ай бұрын
Thank you! 👍
@daviddebaca5 ай бұрын
Wow! Amazing! What a great paint job, and on a 69 Cadi, that's even better.
@DanDModels5 ай бұрын
Thank you 👍
@burgas_color_chrome5 ай бұрын
AWESOME work. Great inspiration for someone getting back into modeling after 30+ years. I'll be posting my first rebuild of my 1980 Turbo Trans Am soon. New Subscriber.
@DanDModels5 ай бұрын
Sounds like a cool build, and Thank you! 👍
@troydowning33025 ай бұрын
Thats patience at its best. Talented bro great work
@DanDModels5 ай бұрын
Thank you! 👍
@rickzinck93265 ай бұрын
I just found your channel. Awesome paint work!
@DanDModels5 ай бұрын
Thank you! 👍
@jean-guylebreton53325 ай бұрын
What a super nice job,u have a lot of patience,I respect you for that,Excellent
@DanDModels5 ай бұрын
Thank you ! 👍
@modelcar15895 ай бұрын
Awesome paint job 👍🏿
@DanDModels5 ай бұрын
Thank you! 👍
@markjolyn944 ай бұрын
Great paint work!! Look's amazing
@DanDModels4 ай бұрын
Thank you! 👍
@AAWOLFE-zc6ly5 ай бұрын
get out of my head, i just finished watching low-rider paint jobs and was thinking of doing it scale model 1/25th... thank you thinking of doing some aluminum patterns too... should work.
@jrsscalemodelz43785 ай бұрын
Awesome work & video 👍🏻
@DanDModels5 ай бұрын
Thank you! 👍
@CwalkEntertainment5 ай бұрын
Amazing work 👌🔥🔥
@DanDModels5 ай бұрын
Thank you 👍
@2shoestoo5 ай бұрын
Stunning work 👏👏👏
@DanDModels5 ай бұрын
Thank you! 👍
@robertdiaz92972 ай бұрын
Beautiful
@DanDModels2 ай бұрын
Thank you 👍
@stevecourtneyscalekustomz26025 ай бұрын
Looks great
@DanDModels5 ай бұрын
Thank you 👍
@Sparkysmodelsalvage4 ай бұрын
I wish I had this kind of skill. I can only do weathered and wrecked. Lol
@Jay-gv9pi3 ай бұрын
AWESOME!
@DanDModels3 ай бұрын
Thank you 👍
@TI44385 ай бұрын
Seriously awesome paint work.
@DanDModels5 ай бұрын
Thank you! 👍
@moparnut62865 ай бұрын
Awesome!
@DanDModels5 ай бұрын
Thank you! 👍
@goforitpainting4 ай бұрын
WOW
@jimmyb68424 ай бұрын
Wow
@thescalemodelcarguychannel86815 ай бұрын
Amazing paint brother ❤😊
@DanDModels5 ай бұрын
Thank you! 👍
@ToddHLHG5 ай бұрын
dang this is a great video! Thank you for sharing...I have subbed to your channel
@DanDModels5 ай бұрын
Thank you! 👍
@garyfishel96125 ай бұрын
Fantastic Dan! I just finished the '58 Star Chief that I bought from you. Wanted it white with Tropicana turquoise cove and roof. I sprayed Nason 2 stage clear right over the bare white resin with no problem! On a scale of 1 to ten, your cars are a solid 12!
@DanDModels5 ай бұрын
Thanks 👍
@nathanielbemis21095 ай бұрын
Hello DanD, There is a TON of oppurtunity for paint to bleed beneath tape here. Do you have a strategy to mitigate that? A ton 'o burnishing? A clearcoat spray after laying in the mask? Please give a few technical bits? BTW - it's lovely to see. Looking forward to seeing it completed.
@tomkendall40793 ай бұрын
Amazing work and talent. I just picked up a bunch of Createx paint and I'm excited to try it. I've been checking out your vifs for ideas and tips.
@DanDModels3 ай бұрын
Nice, make sure you are mixing the paint with the Createx 4030 or 4050 for strength. Thank you 👍
@hortonshotrodshop20035 ай бұрын
Dropped you a sub nice work
@DanDModels5 ай бұрын
Thank you 👍
@hortonshotrodshop20035 ай бұрын
@@DanDModels super sharp paint lines where did you get tape that thin
@Jimmy-sb3fc2 ай бұрын
Wow, that's some phenomenal work right there! Hey, where do you get masking tape that thin? Thanks!
@DanDModels2 ай бұрын
I cut the masking tape down to size. Thanks 👍
@kdkustoms4 ай бұрын
Awesome work Dan!! What tape do u use?
@johnconnor_5135 ай бұрын
Looking good! Did you clear in between colors? Creatix always peels when i try to back mask.
@DanDModels5 ай бұрын
If you are having pealback problems I would recommend making sure you are adding the 4030 or the 4050 in with your color, it should take care of any adhesion problems. The only clear I spray in-between paint is some of the 4050 if I think a area needs a little more protection. Thanks! 👍
@lokijuytmongolito296621 күн бұрын
Nice striping,!! What grit (?) Is the flake your using¿ Does it come finer than what you are using or does it not work as well the finer it gets¿
@DanDModels15 күн бұрын
The flake Is .004 and I think some places have it down to .002, but I have not used it. Thanks.
@thebeardedguyjefflawless58873 ай бұрын
Just found your channel and subscribed 😀...........loving the paint work
@DanDModels3 ай бұрын
Thank you 👍
@hugheskirby5 ай бұрын
Way cool video Dan! What kind of tape are you using? I am loving your work!!
@DanDModels5 ай бұрын
The tape used on this car is the hobby lobby brand, it's a lot like the Tamiya masking tape. Thanks! 👍
@pappytinkers5 ай бұрын
I thought i recognized that Tealalicious color, i did a 442 with it last year. Awesome job with that caddy!! What did you spray the metal flake with, it looks too big for most airbrushes? And where did you get that from? You have some skills, and a sub!
@DanDModels5 ай бұрын
You are right, you can not spray the flake with a airbrush. When I spray .004 flake I use a tuch up paint gun with a 1.0 tip size, And use createx 4030 as the carrier. Thanks 👍
@pappytinkers5 ай бұрын
@@DanDModels thank you! I'm gonna have to give that a try. Was that a Canadian accent I heard?
@Memorylanemodelcars25 ай бұрын
Nice Job but Better Lighting Would Helo Video Display Better
@roderickjones12835 ай бұрын
Awesome!! What kind of tape you use?
@DanDModels5 ай бұрын
I use a few different kinds, but on this paint job I used the hobby lobby brand. It is a lot like the Tamiya masking tape. Thanks! 👍
@roderickjones12835 ай бұрын
@@DanDModels yea I bought the yellow kind it works well on models font leave that residue look
@shsvoboda5 ай бұрын
does the tape come that thin or did your trim it down yourself? I'm new to custom painting and not sure where to find tape that thin.@@DanDModels
@DanDModels5 ай бұрын
@shsvoboda its regular size. It's got to be cut down. 👍
@shsvoboda5 ай бұрын
how do you cut it down? Is there a trick?Thanks!!! @@DanDModels