custom Voron Trident 350 2WD 5160Plus 48V LDO2504 speedtest 1200mm/s 30k accel

Рет қаралды 9,055

minilogique

Күн бұрын

Пікірлер: 28

@Bluestonehero Ай бұрын

The electronics bay cover makes this the best trident out there

@vahvelpoiss Ай бұрын

thanks. noone has mentioned this before if I remember correctly. when I started modding the Reborn 2 into Trident I thought about mounting the electronics to the back like RatRigs do it or to the top like Doomcubes now do it. Eventually I decided to keep it in the printer and down low for colder air and it's actually quite accessible if the printbed and its frame are removed. with transparent panel it's also cool to see all the blinking lights :D

@stas_robotmaker Ай бұрын

Cool. Makes no sense to use the massive Stealthburner for such a fast printer, though. There are much lighter Voron toolheads available.

@vahvelpoiss Ай бұрын

you are correct. this is why I'm not using it for a while now. look the newer videos

@TotallyNoAim 28 күн бұрын

the z homing speed is faaast for a nozzle probe! Nice mashine though!

@vahvelpoiss 27 күн бұрын

@TotallyNoAim thanks! 😀

@jeffmcclain 3 ай бұрын

looks like you don't have your filament tube connected to anything?

@vahvelpoiss 3 ай бұрын

at that particular time - no

@Der_Querulant Ай бұрын

Nice setup🎉 Would you tell me how much power your 48V power supply has? or do they even use a 24v and a 48v in combination? I'm converting my 2.4 to 48v 2 WD and am having trouble finding a suitable power supply. The BTT Kraken can take a maximum of 8A, so 400W should be enough 🤔

@vahvelpoiss Ай бұрын

@@Der_Querulant 200W. the load is momentary not constant, so it should be fine. I’m contemplating wether I should go with Kraken 2WD with 3GT belt or 2504AWD

@Der_Querulant Ай бұрын

@@vahvelpoiss hey thanks for the tip. I just saw that I have to keep the 24V anyway because the BTT board needs 24V for the system. So the 48v only has to power the steppers. Hmm, installing a wide belt will be difficult, with a 20 mm profile, I would be interested to know how you solve it. AWD would still be interesting for me, that's why I bought the Kraken, they still have reserves. I wish you much success ;-)

@vahvelpoiss Ай бұрын

@ I use 6mm belt

@mrcrackerist 13 күн бұрын

Are those the standard rail mounts? was considering using trident parts for my ender 5 plus.

@vahvelpoiss 13 күн бұрын

@@mrcrackerist rail mounts?

@mrcrackerist 13 күн бұрын

@@vahvelpoiss Sorry gantry for the y axis.

@vahvelpoiss 12 күн бұрын

@@mrcrackerist oh. you mean the XY joints? these are Funssor CNC Voron 2.4/Trident XY joints off of Aliexpress. I just have my XY gantry mounted upside down compared to official BOM because I like my rails on top for a bit easier servicing.

@crnalajna 3 ай бұрын

Trident without triple Z?

@vahvelpoiss 3 ай бұрын

oh you can actually see Z-pieces right there, not sure if you actually watched it. it was transitioning like every other modern person 🫣

@crnalajna 3 ай бұрын

@@vahvelpoiss Yeah, I saw front rails mounted on the wrong side. ;) It it easy to be confused by following the Voron docs. Anyway just keep the printer alive, and fast... :)

@vahvelpoiss 3 ай бұрын

@@crnalajna couldn't mount them to the right side because of thick industrial veneer sidepanels that use printed mounts for M5 bolts. had to make my own temporary design to figure stuff out and soon get some metal plates in the mix. it's a hobby project and I like figuring stuff out myself, keeps training the mind edit: look at newest upload

@oOWaschBaerOo 4 ай бұрын

what is that idler and a b motor mount setup ? im searching for smth like that where the idlers are minimal at the front and the tensioners in the back

@vahvelpoiss 4 ай бұрын

aTinyShellScript metal plates are used for idlers and motor mounts. I just got my hand on recycle bin special and used 4mm stainless steel lol