Customer Complaints EP.014

[@leemccready845]

Tip of the day = just use a short socket with a short extension

[@TOisONit]

Beat me to it lol

[@jamesgottfriedson5060]

I’m one of those dummies that has mid length sockets but I’ll take a deep socket and stuff a nut or piece of a rag into it to make it mid length

[@porter21100]

@@TOisONit same here

[@DrDodobro3]

Thinking that the whole time

[@DigitalEyez715]

WAKE UP CONCEPT III DROPPED

[@extremericer3371]

Your motivational speeches coincidently match with my week LOL everytime

[@gregstoddard8097]

The alarm one was funny. Not all alarms fail over time, poorly installed alarms fail. That was a poorly installed alarm if you found it that quickly. I installed alarms for 15 years and it was very rare for one to fail after it had been installed for more than a month. I always soldered all my connections and made sure to hide all the components to where you had to take half the dash apart to find them.

[@cliffordmeyers3688]

I spent a night in the county jail and the first thing I did after I was released was go to work, that was the best thing I could have done with my time and energy.

[@williamchang5023]

yes sir... just go to work...

[@znav22]

😂😂😂😂

[@cormaro13]

The first thing you should’ve done was a take a shower and wash away your butt buddy memories 😂

[@Gordoperro-le1vv]

hell yeah!

[@Craiggg12345]

What a loser

[@antonmcesaro]

For that socket trick what I do is take your bolt head, wrap a small piece of paper around it. Then put the bolt into the socket. You can run the bolt in and the paper holds it in the socket until it's tight then falls right out.

[@larrywalker2888]

Great work you all are doing. Enjoying the episodes...thanks.....

[@cdawggaming4426]

I havent found a magnetic tray before but i found a snap on wrench and light in a car once

[@mrcokez1]

Been waiting all week for this, stay safe out there guys and god bless

[@hybirdhater47]

You know it’s gonna be a good one when it’s just the first car in the video and EVERYONE is either stumped or shocked by something on it. 😂😂😂😂 I like these occasional episodes.

[@peppermintnightmare4741]

Almost at Customer Complaints Ep.020, Sir! Aloha from Hawaii brotha 🤙🏼

[@williamchang5023]

thank you sir... aloha

[@Edgarthegamer]

Yo first episode I’ve seen, pretty bad ass learned a little and laughed the whole time 10/10

[@ChristopherHarris6005]

Awesome video as always Will and Crew.

[@DanielBisagni]

Keep these coming, they are great.

[@mase8832]

Nah there’s no way that first one isn’t a roll back

[@Jacob_Racing_Messiah_Reis]

Yeah I was thinkin the same thing, regardless of the vehicle's age there is no way those rear wheel bearings should be that bad with 33,000 miles on the clock...

[@Flacidross]

@@Jacob_Racing_Messiah_Reis yeah I thought it was just a salvage title rebuilt crashed car, but after hearing those bearings. IDK i mean maybe those trash megan racing arms couldve ruined his alignment and killed the bearings prematurely, but dawg at 33k they should NOT sound that bad. thats crazy

[@kingstyle7314]

​@Flacidross you would be surprised. I live in the south with a bunch of idiots running wheels so wide on their trucks the whole tire is out of the fender and in like 10k miles the wheel bearings and ball joints yeet themselves off the truck. I've driven past brand new trucks with those wheels on them with some of the worst death wobble I've ever seen it looks so bad

[@Flacidross]

@@kingstyle7314 oh trust me I’m down in South Carolina. I see those dumbasses all the time. Along with the squatted trucks

[@evelynsahoe8896]

pretty sure he would've said if it was because the Autel Scanner he's using would've showed the real miles.

[@KeepItC1assic]

I needed the closing tip of the day thank you brother!

[@bryanschm.9769]

Tip of the day.... Any nut the same size or smaller that happens to be laying around(floor) also works well as a spacer.

[@michaeldamon1323]

Every time I watch your customer complaints videos I sit and laugh

[@Strongman_Gimli]

Love the bolt trick, keep said bolt-hot glue small magnet on end of the bolt for the side angle or upside down holes. 👀 pun intended 😂🤣

[@youngta173]

Keep up the good work ! Love all the videos 👍🏼

[@DreamcatcherAcresFarm]

when he said the screw is missing I was NOT expecting that part of the dash to come off like that and i legit gasped. My husband was what happened?! The dash exploded...

[@yodauaaaaaa]

🤣🤣🤣🤣🤣 I was thinking the huge wheel from the price is right

[@esrtradajesse]

Speaking of crooked emblems, on my m3 the digital bmw m thats on the dash is croocked and offset so when youre looking at it from above its even but down low you can see the letters are offset

[@azur1o]

Babe wake up. New C3 video just dropped

[@wkjeeping9053]

Work is how you survive. I been so sick and still drug myself out of bed, went to work and the boss sends me home. I was a workaholic and retired early. I also still detail cars a few a week on my terms now. I dont need to but it keeps me active and busy.

[@wood6078]

Tip of the day...start it by hand in the hole. Prevents cross-threading, too

[@Bancboyz925]

12:20ish the Kia with the heavy trunk. Guessing the trunk springs were missing are atleast one. Could have had a carbon fiber trunk on it and removed one or both so it didn't fly open.

[@enzz3855]

From not sure if the content going to continue forward of EP.01, till now drop EP.014. Keep it up.

[@daboogieman8767]

on tip of the day can just put a paper towel in there or a rubber washer (turn it into a spark plug socket type)

[@Sloneisdead]

You guys need new merch! That concept 3 shirt is sweet

[@tinakerr2300]

great Video...can't wait for the next one

[@General_patton]

This is what a watch on break laughing knowing i have to go fix the same stupid shit right after 😂

[@EvolEvo23]

Random tip of the day.... always start bolts by hand to avoid stripping it

[@Demoblood95]

Best video ever keep them coming

[@lloydterry4796]

I enjoy all your videos

[@thomasmann907]

use tape or paper towel also for that same tip of the day without access to correct bolts

[@globallybaddrill]

Robert is underground fosho💪🏼💯 shoutout 2 the 3

[@sevenity2677]

16:22 u can also shove paper or tape in the socket. In a pinch.

[@sugarbombs6884]

4:04 daaaamn look at the bearing play when he spins it 💀

[@TheBrazier815]

The bolt trick for the socket is an old one in my books

[@crisnmaryfam7344]

12:50 Plot Twist, It was packed with white stuff...

[@brandona4323]

Watched this at work

[@PhantomBurke]

Sexy Trueno edition 86. Love that they made that

[@joshbailey2782]

Hey guys love your stuff big fan.. but as an Army Veteran I can’t get over the fact that the American flag you have hanging is backwards. The field of blue always goes on the left. Pleaseeeeeee fix it!😂 keep up the good videos.

[@Howt-ooo]

4:01 watch how much the wheel moves!! 😂

[@triplesvn]

My favorite KZbin shop

[@dracofenix3860]

I remember a Nissan one day, 16.300km (little over 10k miles). Have not even done the first oil change. I´ve seen cleaner work vans, the entire interior was covered in dust and bread crumbs. It was already disgusting. I have no clue how you get your brand new car that dirty so quickly.

[@Trihurt11]

Go to work! New environments help! Persevere!

[@VRVegeta]

Seemed they finally decided to blurr the license plates 😂

[@Crackson]

definitely need a video or a segment on the tibby sitting in the room next to the CIII K5, no content anymore anywhere for them :(

[@guusputten4880]

Poor adam is always getting picked on hahaha

[@HomieG8601]

That car with the failed alarm got me worried for the future. I have a viper aftermarket alarm system because my wheels got stolen a couple years ago and I was left on bricks. Will that happen to me too?!

[@mov744]

That poor Accord Coupe. Must have been the hardest 33,000 miles. 😢 Also wtf going on with that Optima trunk. Is the lip spoiler making the lid that heavy? 🤣

[@76Dville]

I wouldn't be surprised of someone swapped the instruments and interior with a wrecked one. Are the Miles recorded on the computer or instruments?

[@GKAndagraunt]

Finally I found you. 👍🏻

[@johnnyd4200]

4:15 that wheel was wobbly af

[@ironhidedirtymax7940]

Are those will's project cars in the back?

[@1971anaconda]

Just use shallow socket with extension 😂

[@voxwhitefang]

EY i saw a veloster back there! it in for a motor?!?

[@Gtfokthx]

sitting at home will send one stir crazy. i had a viet ex that miss carryed twins went the intervention order path instead of talked like normal people work was prolly the only thing that kept me sane. or the fact she gave up a gov job to go juggle cawks for a living o_0 so go to work least you will have coin to fail at pissing the pain away

[@RobTheSquire]

Don't you mean the horn is going on...Just like your Alarm Clock.

[@mateuszgeppert290]

we need that

[@human_cube]

I need a concept III x collector car feed video

[@SuaSponte75]

I see complaints... I watch 😆

[@nickisslamin]

I found a magnetic light on a trans pan before still use it to this date

[@jrw2618]

5:13 I bet that customer bashes how Honda is 💩 quality too 😂

[@frankyalvarez518]

lets see the tiburon thats in the back of the shop!!!

[@Aim36R]

That was definitely rolled back. If not then it sat, an didn’t move for a while in the sun

[@sagittariussage43]

Ive seen some FUCKED 30k mile cars, but ive also seen some really clean 100k+ cars. This car for sure has either missing an LED in the odometer or got one from another car after a recent wreck. That wheel bearing is beyond COOKED for 33k. I SEE A TIBURON BACK THERE 👀whats up with that?

[@NFSCAMARO]

I've driven my car 100,000 miles since I bought it at 31,000. It still looks 95% as good as it did then

[@cormaro13]

It’s a Chevy so I hardly believe that especially on base model 😂 , get ready for blend door and transmission work , how much you wanna you haven’t even service the transmission yet ?

[@NFSCAMARO]

@cormaro13 not a base model, also been regularly serviced. Don't talk shit on what you don't know

[@cormaro13]

@@NFSCAMARO my bad right above the base model , it’s not even a ss so it doesn’t even matter poor slow boy 😂 and regular serviced by who , you or the dealership , I’ll laugh if you say dealer lol , I already owned a 2013 v6 model so I actually know what I’m talking about 🥴 I’ll spank that slow Chevy all over the road now in my new gt premium 😆

[@NFSCAMARO]

@cormaro13 mine isn't a 2013. So you're wrong again. Not even the same generation. Sorry you were too poor to afford to maintenance such an easy vehicle. Figures you would take a Mustang following. You keep racing Genesis in straight lines pal, I'll be continuing my journey with this car while you end up in a ditch.

[@cormaro13]

@@NFSCAMARO it was a 2013 why the hell would I want it 😂 and it’s like one generation up , you didn’t get that much bump in hp , especially if it’s the 4 cylinder😂😂 And I don’t really understand that comment when I have a brand new mustang gt now , i didn’t know buying a 50k car was poor when you’re driving around in a 20k or less car , that will give you problems soon enough don’t worry , you look like a dealership peasant 🤡😆😂 Funny how I’m at 4k mileage and no ditch , it’s ok you’ll get to that power level one down slow 🤡😂😂

[@KabanicaTHEONE]

Actually inspiring guys

[@arcanask]

13:13 Is that a Tiburon I see?

[@JohanVonSavage]

Yo what flex head ratchets does he use ?

[@MartinHernandez-qv4vc]

Great advice. You still need a job and things will smooth out

[@denwilliam4261]

Let's play the wheel of fortune!!!!!

[@performtechautorepairptar]

That Honda was not rolled over the ECU and the dash was replaced

[@Hameruu]

My previous car has like 180k mileage and it does not sound or look like that

[@chekoeldisenador]

I swear to god that guy looks like Ralph Barbosa

[@Makeshift_Housewife]

My 22 Honda Insight has 22K miles on it. I cannot imagine destroying my car like that in 33K miles

[@skorpiiuz6]

Love you too, I saw that

[@jeremystebbins8480]

lol that’s some South Dakota shit for sure.

[@danieljim9103]

I agree 👍

[@levihunter4417]

Let’s go to work!

[@HellRaisier666]

Soooo how do I apply for a job 😂

[@david_dadavi9924]

Is this a re uploaded

[@2lstGun]

Do you think maybe that first one gets a rollback before every visit?

[@Greg_Stache]

5:37 who you calling pinheaded?

[@LawlessOffroadAdventures]

The logo be the worst 😂 bet it be even better if it had them simpleton red line on the top

[@khaos661]

Fine. I'll go to work.

[@CRobertTv]

Go to work. LOL easy for you to say when you own your business. When your working for a toxic company you dont get that you dont wanna go to work because how these companys treat you.

[@tonypokester4121]

That genny @13:00 👀

[@LunchmoneyH]

Shop rate for standing around and having everyone join in the shit talking rate?

[@sstoner911]

why cover the plate? its exposed all day driving it ?

[@BrandonMcIntosh-f2g]

Is it me or is he using Kirby squeak squad and Pokémon diamond and pearl sound track

[@ChristopherVogl-ju3ov]

I’m guessing he hasn’t experienced the Carolina squat. Saying the back is low…

[@LeG35nd06]

We need w rx7 update champ

[@jayperion5712]

Okay how about 10k between oil changes? Stock Honda...sounds Good?..10k was done in 5 days by these 2 nitwit brothers who were scamming there dad whose a truck driver for the costs....my mechanic is 5'-10" these guys were 7'-5". Honda destroyed in less than 2 months...now there bussing it everywhere. Dad is no longer passed or out his hard earned dollars.

[@DuniaHanyaSementara]

✅

[@efanclublolsmaforlife2501]

Are u happy now chaa

[@anormalplayerpotato3116]

NNIICCEE