Customer Complaints: Jdm Motor Swap PT2

[@keonhowell2856]

U can tell they take their job seriously and enjoy what they do. It's cool to have a team willing to learn how to get the car running, and the leader not only shows how it's done but also works with them, giving them advice along the way . Well done. This is my dream as well. I hope one day I can achieve a job like this . Unfortunately, I had to learn some things on my own, but nothing sounds better than a nice car that starts up .

[@fastinradfordable]

I’m that guy for some of the young ones. One of the kids I got started owned his own shop employing his dad and brothers. I take it very seriously.

[@comkver]

Someone in the last video mentioned the possibility of that the clutch wasn't aligned correctly.

[@ituaki]

@STAYTUNED69yea on VQs the crank sensor has a reluctor on the flywheel which if not aligned with a hole it’ll cause a bad misfire (quoting what they commented)

[@carwerks101]

I think he means flywheel, but even if the dowel was missing and the flywheel was installed incorrectly, it still would have gotten spark, so the “fix” for this is a bit confusing

[@j.gtheautotech8455]

@@carwerks101not necessarily, every car is different. It’s like as if the crank sensor is broken. It will cause a no start with no spark at all, or fuel depending on the vehicle. If it was out a few teeth then yes spark may have been erratic

[@DEATHWISHVQ]

I think this video explains how and why a g35 won’t start due to a clutch engagement, I think this also happened to my friend kzbin.info/www/bejne/n6HZpqN6rZWcZ5Ysi=k4Om4wQrjMu-zKpK

[@marcomontano9454]

Very interesting

[@vaylintwilight]

Not even a mechanic just love cars and love learning. Love your vids. Like getting to hang out at the shop. ❤

[@danh6341]

Thank you! I am planning a Rev Up to Non-rev up swap with a JDM engine here in a few weeks. (ECU update to run it is in the works.) Then engine has been out for some time while I figured things out. I am very handy but feel like a novice at most things. You likely saved me from a hang up or two! The steps you took in figuring out the issue were very helpful, also!

[@TacticalTunic4]

I knew it lol I said it in the last video .. the fly wheel was off timing

[@Sarcof227]

Was just about to come find your name to @ you about it. Good shit

[@jram2296]

Officially Goated lol

[@ConceptIIIPerformance]

You were correct #goat

[@NightmarexXx831]

Great work guys, keep up the good vibes and always enjoy the content. Learn something new everyday.

[@naviitoo]

Bro I always laugh the small SFX 😂 when the bolt drop and hit his chest. Reminded me of the old hit markers for COD 😂🎉 2:48

[@Maksothebagchaser]

Need more of these vids! Fav thing to watch high af 🔥💯

[@tomr1107]

Cant wait for the summer to take my built twin turbo out to the track again. This video got me itching to mod it some more.

[@paulsoileau1850]

Love the Pokémon 3rd gen music playing. Made my day

[@captaint4587]

That’s from Pokemon Emerald correct? That brought back amazing memories back 4-5th grade

[@brandonlapointe5939]

The CoD hit markers every once in a while just send me lol

[@countpuchi]

I learned alot by watching these guys.

[@iMintyNinja]

I really believe Auto Mechanics are basically Mechanical+Electrical Engineers and should be treated as such.

[@michaelharland9599]

engineers design things and these guys fix them and take them apart/put them back together very rarely will you see an enginner doing the physical labor

[@fastinradfordable]

Because if they let mechanics build cars Nothing would be breakable

[@dustinainsley8792]

Amen. That is why in not working in the industry. No desire to.

[@PewZapDie]

Out of interest how much would this repair cost?

[@yuno3364]

Just did a kswap and had the crank sensor trigger wheel on backwards, I feel their pain lol

[@GuadalupeAaronMartin]

This engines vq you have to run oem crank position sensor and cam shaft both banks

[@wkjeeping9053]

I do mechanic work on my own vehicles but I won't do shotty work just to get it running. Here's example: I have led headlights with a chip on each thin side and 1 chip was out of 2 I replaced cuz I can't stand to see shotty work.

[@HandGunPat]

Damn man, it's only like I commented it! No shoutout! haha all good, glad you got it fixed.

[@nazc0]

Easy way to test for this problem is to unplug the crank sensor and fire up the car. If it idles fine, its a misaligned flywheel

[@georgediaz8118]

need mechanics like this in nj , great video

[@MarkMyWordsXx]

I see that it's standard practice to use the cardboard to keep the trans bolts in order. My question is, if their is any difference in the bolts at this time to make them not a not standard spec, weather it be stretching or whatever, shouldn't they be considered "damaged" and then replaced? I never understood this. If they're gold bolts they should fit the same Into any spot

[@SpencerSterling-e6z]

Holy fuck yall are geniuses I never would have thought about the cults not being aligned. Wicked problem solving

[@kennyman338]

Graffiti on the back wall? 😮 If the alternator is bad is it not supplying it with not enough voltage to cause a misfire.

[@caratxd]

y'all listening to some good music ngl

[@Shuten_Wukong]

Good ole WorldPac. Brings back memories.

[@DarkSkillchain]

Man this car has so many issues lol gezz the owner did the work him self smh 🤦🏽‍♂️ going see a part 10 lmao soon on this thing

[@guillainaubert5764]

Nice work ! I love to see yours videos ! If I may say, I think the sound of the voices are a bit unbalanced with others sound like wrench or the radio in background. I'm french and I need to ear the voice clearly so when harmer hit, i'm closer to become deaf ^^Anyway perfect job and knowledge ty !

[@giantpandagraphics9568]

I really enjoy the video! Keep up the good work.

[@ConceptIIIPerformance]

Thank you!

[@Kingcustomz]

I love the Pokémon background music😊

[@bobswrld8212]

Love the videos. Keep it up

[@davidgriggs3967]

The flat battery would have been the misfire issue due to the low voltage to the ecu .

[@guyeazzy]

Could have just unplugged the crank sensor and if it starts then the fly wheel was on wrong

[@ManchaTwoFr]

Is this a mechanic tip? Or just specifically for this car?

[@tomr1107]

@@ManchaTwoFr specific for the VQ35DE.

[@flako7499]

bro got charged an arm and a leg. Love the videos tho !!!

[@woo10gamingtv11]

oScAr ...YES SIR?!?!?😂😂

[@michaelalvarez3701]

Also totally unrelated but 13:12 R+L Truck in the background, I work for them lol

[@charger6773]

Probably still got air in the cooling system pain to bleed these vqs

[@BootayCrust]

Easy to bleed cooling system from air bubbles. Use an over fill funnel like they did with the yellow one. Turn the car on after filling and have it overfill. Air bubbles will work themselves out that way, also can squeeze the hose to help. Simple😊

[@woo10gamingtv11]

When his ratchetwrench bent i screamed😂😂😂

[@esrtradajesse]

The Pokemon music is everything

[@naviitoo]

BIG DUBZZ 🎉🎉🎉 9:03

[@GUTSO10]

Big dubs in the trap 🪤

[@aaronjimenez9529]

What Sz wheels are the Ferrara wheels on that stinger ?

[@crazyjatt24]

WE NEED MORE LONGER VIDSSS

[@Jwop5799]

Bro my g is doing the same shit, I replaced my auto trans with a used one and it gave me a crank sensor code. I replaced it along with the cams and it still gives me the code

[@seahad4744]

yooo the hit marker sound from cod lool. shout out to the editor

[@Mike-vn8sn]

OOOOOOOO!!!!! A part 2?! :D

[@ABeans07]

Ready for the next take over.

[@nDiggity]

damn good work guys

[@priyampatel]

Here just for the old Pokémon background music 😂

[@cam.evo8661]

am i hearing Pokémon sapphire\emerald music in the back ground?!?

[@vcmdpropulsion126]

still missing?

[@drdiabeetus3061]

Great cars, sadly so few left in good shape. These aren’t hard or expensive to maintain either. Unfortunately they get abused, neglected, and hand around like a corner girl.

[@Angelsmokes2023]

Gotta love the Pokemon music

[@colenorthwick5023]

What city is thus busniess located

[@franciscogarcia4591]

😅😅😅😅😅este canal esta bien cura y luego nadie se intimida en decir la verdad😂😂😂😂😂

[@luisornelas5020]

Bro I’ve been trying to look for the proper spelling for douma I need help also what does it mean thanks in advance

[@lawrencedarrall815]

Pretty sure it’s spelt doma and means dirt place. Could be wrong though

[@fastinradfordable]

Get these boys some headlamps!!!3

[@colbymesservy7618]

Bro i did one on an nissan pathfinder and found out the hard way that this happens. Very common on dual mass flywheels

[@michaelalvarez3701]

Who's 4Runner is that? D:

[@speedymike7845]

So what was the problem can somebody tell me please??????

[@tomr1107]

flywheel was installed incorrectly making the crank position sensor not know where in the rotation the motor is and throwing off spark firing order.

[@Atrocities85]

Silicone the shifter boot 😅😅

[@mezar4854]

9:40 NO MAMES GHUEY!!

[@GBKICKS1]

love these cars

[@resonantshadow]

The fkn pokemon music 😂

[@themreric1]

nice. good job guys

[@nicholasaverette4061]

Bro, yall Wana work on my s6?

[@jtjimenez05]

I wanna bring my car here someday

[@Niko-ui9xi]

@Handgunpat said it in the last video he was correct!!

[@rpgbossatron591]

Big dubs

[@crash1915]

No fucking way… my dumbass would have the fuse block out checking pins all damn day, and for nothing.

[@ezratorrey5227]

so it wouldnt run bc the flywheel was installed incorrectly?

[@ConceptIIIPerformance]

That is correct

[@spannaproductions]

Could that happen in an automatic car?

[@tougeu13]

yes...both fly wheels have those teeth on them@@spannaproductions

[@tomr1107]

@@spannaproductions most likely. remember tho, autos dont have flywheels, they have flex plates.

[@IHadToMakeThisAccount]

Id assume yall have to charge for all those hours diagnosed right? I hate working on things that other people have already tampered with because you always assume they did things correctly (because they said so) so you spend forever looking for problems unrelated to what they could’ve done, only for for you to have to redo stuff they already messed with

[@DanielTorres-bs8dx]

Using regular water in the radiator? Remind me to never go to this shop.

[@johnthecarguy]

... you missed the whole part where they put the unmixed coolant in. How convenient

[@tomr1107]

@@johnthecarguy only distilled water should be used when mixing concentrate coolant. Im sure spring water is fine, but tap water or hose water has alot of minerals in it that can deposit in the cooling system.

[@cucumberandgreentea]

💸

[@batman8ish]

idk but that g35 sounded terrible ):

[@danieldt9439]

du maaa

[@1slowbenz]

Sup

[@hendo5805]

Sup

[@xenorica7457]

Sup

[@Krakenlance]

sup

[@4rvnky]

sup

[@JoseRamirez-hv4hi]

Sup

[@sonnynguyen1472]

Du ma lol