Do you run wheels spacers? What're your thoughts on them!? Shop Wheel Spacers! bit.ly/3e0mFbo Sign up for our Newsletter! - bit.ly/3k7GNuX Wheels + Tires! - bit.ly/2ZQ5pxw
@kadenlarson50002 жыл бұрын
I want to put spacers on my 2011 gmc 1500, I got a 3.5in rc lift on it with 20x12 arkons with some 33in federal I got from you guys. The white Chevy in the vid has its front quarter panel trimmed, how did you guys do that?
@ridgerunnerstv3 жыл бұрын
Me driving my lifted truck with spacers down I-64 with this playing right now 😳😳😳
@drewarthur21693 жыл бұрын
Ayo focus on the road bud😂
@codyblair73382 жыл бұрын
VA??
@dakotadugan82004 ай бұрын
@@codyblair7338 lmao
@deadbodybaby14 ай бұрын
That’s fucking hilarious
@demetrausbrooks6592 күн бұрын
757 VA
@seantylerwray3 жыл бұрын
Ive run several sets over the years and never had any issues.i always loctite and torque the spacers to specs.i cant tell you how many times ive seen people just use a impact to tighten spacers down.
@Jay-hp6pu2 жыл бұрын
It’s usually the dumb people that give things a bad name.
@dylansmith3 Жыл бұрын
Is it okay to use red locktite?
@seantylerwray Жыл бұрын
@@dylansmith3 use the blue medium strength.the red high strength needs to be heated up around 500 degrees to get it to break loose. I always re check my spacers when I rotate my tires. My spacers have been on for over 2 years and haven't came loose using the medium strength.
@dylansmith3 Жыл бұрын
@@seantylerwray okay I’ll get that. And unfortunately my 1.25 spacers for my Silverado aren’t hub centric. Was just in possible to find the adapters I needed. Should I be okay? My torque spec is high on my 99 think book says 140ftb so I’ll do that twice one for the spacer and second for the wheel on the spacer.
@Gordito4 Жыл бұрын
@@dylansmith3 hey Dylan, I just order a set of ksp hub centric spacer for my 21 Sierra, they’re 1.5 in and only cost around 150 shipped for all 4 ! They’re also forged aluminum and I’ll keep you updated once I get them installed
@Blackocalypse3 жыл бұрын
Cant go wrong with Bora 🤟🏽🤟🏽🤟🏽🤟🏽
@jeffstanley69613 жыл бұрын
Bought Bora 3 years ago and put them through hell. Still going strong. 🤙🏼
@Blackocalypse3 жыл бұрын
@@jeffstanley6961 Hell yeah bro🔥
@wayupnorth19733 жыл бұрын
I have 1.5 inch spacers on my 2014 Tacoma and I beat on it both on and off-road every day. Never had an issue in years.
@s550ceez Жыл бұрын
What brand?
@Mike-uk6to23 күн бұрын
What brand
@dg-man2113 жыл бұрын
I run 2 inch bora spacers, ordered it from the US thru the website, had them on 2 trucks so far, atleast over 2 years and never had a problem with them yet.
@larrymobley15075 ай бұрын
any bearing problems?
@javencharles3 жыл бұрын
Petition to get banker to do a video all alone. We need all that energy
@masonrobins41053 жыл бұрын
Day 63 of asking Custom Offsets to build a Monsterjam Monster Truck with 66x43 tires.
@nickthomas76603 жыл бұрын
I’ve had spacers on my taco for 3 years now with no issues, plenty of abuse on the road and off. Just like you said, buy quality parts!
@Blanco_5.03 жыл бұрын
Got some boras about a year ago and still holding up strong 💪🏼
@ericg4x43 жыл бұрын
Billet 6061 hub centric spacers with grade 10.5 studs are available for around $150 a set of 4. Billet 6061 is not as good as 7075 aluminum, but it’s stronger that 99% of the cast wheels on the road. Also, spacers are no worse for wheel bearings than similarly offset wheels are. Those are facts!
@BIGREDTECH3 жыл бұрын
That’s the truth. Still putting the same amount of leverage on the hub with offset wheels!
@banzaiib2 жыл бұрын
Yup. Wheel bearings don't care if it's a spacer or wheel offset moving the COG of the wheel/tire outward... The net effect is exactly the same.
@alliedominguez2805 Жыл бұрын
Yes i have wheel spacers on my ram 1500 and i bought them from Amazon and they r HUB CENTRIC no issues with them and ive been semi stuck with a 16ft trailer loaded with my toys and one on my rear bed and got out nicely,one other thing i used red lock tight on my spacer bolts and torqued to 100 ft lb .....
@youngboomerragevictim88573 жыл бұрын
Supreme suspension 2" here.. just back from 2,000 mile road trip still chilling
@austinpalmer343 жыл бұрын
Thanks I just got mine a few days ago bout to put em on
@Brandon_Jackson2 жыл бұрын
I have cheap eBay aluminum 2” spacers and I’ve done a lot with them I even towed my 7,500lb camper with them and they are still going strong. I just put aftermarket wheels on my truck and my stock lug nuts barely fit in the whole of the rim so I’m hoping the rim doesn’t put any pressure on the lug nut and bend or snap it off while driving.
@flyingjoed Жыл бұрын
Wow! No substantial amount of lug bolt to attach your lug nuts to? That's a disaster waiting to happen. That comment was a year ago so I'm thinking a disaster has already happened! Hope you're still kickin out there!
@Brandon_Jackson Жыл бұрын
@@flyingjoed nope I’m still good. I still have the setup but I rarely drive it because I found out my rim is bent. But surprisingly the spacers are still holding up to all the abuse lol.
@kregadeth55623 жыл бұрын
Thanks guys. I have my factory STX wheels on my Ford and I like them. So I don’t want to get new wheels yet I do want that sexy poke. Spacers is the answer.
@EEC4983 жыл бұрын
I’ve used Spidertrax on multiple Jeeps running 35s and 37s, usually on 17s. City, highway and rock crawling. Never had an issue. Only used the minimal width needed for clearance.
@Philly_Flint3 жыл бұрын
Curious, does a 2 inch(High quality) spacer put the same wear on the trucks components as a wheel with a high negative offset 🤔
@johnnymartens95583 жыл бұрын
Yeah, basically however you get the wheel out there whether it be offset wheels or wheel spacers, itll produce the same wear on the suspension components and wheel bearings
@IMSaved998 ай бұрын
Is spacers mostly to help with turning when you have big rims that like to rub on the control arm?
@lucassalstrom1753 жыл бұрын
I love your guys videos. Just bought a 2001 Dodge Ram 1500 hoping to soon be putting some wheels and tires from custom offsets real soon! Keep up the good content
@jonny555ive3 ай бұрын
Good luck finding the option on their website, they have everything else dodge than RAM..... Just a heads up.
@xs10z Жыл бұрын
I like how you occasionally give a shot of you from the side, as you are talking, and then, do another shot from the front. It's very avante garde!
@thee_ole_24v3 жыл бұрын
I also had 24x14 American truxx blade chrome wheels with 3 inch spacers and 2 inch wheel adapters so 5 inches total.
@jesussuarez97422 жыл бұрын
hell nah
@joeg85022 жыл бұрын
Good video but please explain more on the damages spacers could potentially do to your truck
@CustomOffsetsTV2 жыл бұрын
Proper installation shouldn't incur more damages other then the wear and tear on the wheel bearing/ball joints and even that is dependent on your setup
@mmo89882 жыл бұрын
@@CustomOffsetsTV Exactly
@twocooleetoh3128 Жыл бұрын
@@CustomOffsetsTV palabra
@mikedauzat81199 күн бұрын
You sound and act just like Gels big time… he was one of the best we’ll never forget Gels
@SouthernLawn Жыл бұрын
I’ve never had an issue with spacers. Always torque them to appropriate specs.
@boston14502 ай бұрын
How long does it take to RECEIVE Bora 1 inch spacer for 2023 Tacoma ? On line it shows 6 weeks, is this correct ?
@robpracht93035 ай бұрын
The wright spacer..the wright way put on will not give problems. Next thing is how wide can you go without putting to much stress on things.. I run 1.5mm front and 20mm rear.m hubcentric. I find my car handling much better..cornering is more tight and less body roll even my suspension feels better..18 inch low tires..Qashqai J11..it was a bit stubby on bumbs etc..but now with the little more leverage of the angle..it feels much better. So spacers perfect..but just don't over do it ..and if you know your bearings are a bit old already..change them before you put spacers..
@EhHutchy3 жыл бұрын
I swear to god your videos read my mind half the time. I’ve been considering wheel spacers on my ‘08 ram 1500 just to add some stance and looks
@raymondayala8510 Жыл бұрын
What type of wheel spacers did you get and did they work good for you I have the same truck just want some advice
@EhHutchy Жыл бұрын
@@raymondayala8510 hey, I never ended up getting any. they had the bora spacers on amazon for awhile and when I was ready to buy them they were no longer available. I'm up in Canada so it is a lot harder to find the bora brand spacers therefore just left stock for now
@joshuacoats92843 жыл бұрын
Soooo can we get a video of him running around the building 🤣
@Detroitcarchronicle3 жыл бұрын
I been subbed for a great while I love you guys you have amazing advice. Insane truck builds, very good knowledge On should/should not to Do. Also so many suggestions on about 98 % off trucks based off of experience know how And it’s happened to me or my friends in the past situations keep doing your thing guys love the content.🤘🏼😎
@CustomOffsetsTV3 жыл бұрын
Awesome thank you!
@dylanpotts8403 жыл бұрын
Not everybody wants to drive all the way to Wisconsin should definitely open up shops world wide. Y’all are good enough to.
@CustomOffsetsTV3 жыл бұрын
We've been tryin! We all wanna get outta this state bad!
@willmaxwell39493 жыл бұрын
@@CustomOffsetsTV move montana, I am in belgrade
@zrod67213 жыл бұрын
@@CustomOffsetsTV come open a shop down here in good old Florida
@twocooleetoh3128 Жыл бұрын
Califas cuhh
@Miloboa Жыл бұрын
I see people saying 2” is the safest, but i’ve been dipping into 3” spacers. I just want them so I don’t tip my now RWD explorer doing donuts. Are 3” safe??? Seems like a taboo subject in the community.
@TorchMeetsWorld8 ай бұрын
So i bought a truck with a lift kit and it had deep set rims that rubbed on the front when turning; had to get new wheels cause one was bent. Anyway; the front tires are about 2 inches wider apart than the back. I just want to widen the rear to match. Is it safe to get 1 inch spacers just for the back? I think ill have to cut down the lug studs to make sure the wheel fits flush; and im not to sure about that. Ive been hesitant about it for about a year so i figured id start asking around
@jasperhurst2630 Жыл бұрын
Yeah I was driving next to a lake in the space are cracked and came off it was aluminum I don’t know anything about spaces at the time but almost went into a lake upside down but the truck at the ditch that’s best far is it where it but I do have a bigger vehicle suburban three-quarter ton then I’m looking for spacers for eight hole to six lug if you have any questions on it
@keithbartlett76793 жыл бұрын
I went with Bora. Backordered and covid took a long time for them to get here. But I'd rather go with a reputable solid brand then take any chances. Just my thoughts.
@thegabecobb71153 жыл бұрын
What happened to Fuller? I’m not complaining about the new people I was just wondering.
@cgagsstudios88353 жыл бұрын
Got a new job somewhere else
@maxaures50873 жыл бұрын
Wow its been awhile since i’ve been this early, Love the channel.
@marshalkwt2 жыл бұрын
I use 2 inch 50mm dcvamous hub-centric its run great no issue i bought them from amazon before 3 month
@stevenyoung37593 жыл бұрын
I’m running 1.25 inch hub centric titan brand been running them for a few months no complaints here
@jacobcarter94913 жыл бұрын
I’ve had wheel spacers give me a fun time. The threads completely pulled out and broke a few lug and the next thing I know is I see my wheel pass me. Trashed my two front wheels and broke my bumper valence.
@lewisgeer1994 Жыл бұрын
What brand where they?
@darrinf.63973 жыл бұрын
Just paid off my truck, so I’m hoping to start my truck build soon
@xinyangguo4753 жыл бұрын
Just ordered a set of Bora to fit my 17in wheels on RC lift kit
@parvariramin Жыл бұрын
Will the 25mm rear spacer and 20mm front spacer damage the wheels, suspension and bushing in the long run?
@mchestnut1970 Жыл бұрын
1.75 spidertrax wheel spacers. I agree don’t go cheap. Too important and you get what you pay for. So far no issues
@Team83Redfish3 жыл бұрын
I run 1.25 spacers on the rear of my truck. Haven’t had a problem in over a year
@brentnanita393911 ай бұрын
Here is the deal.. spacers are safe if you do 3 things.. Buy..Hub centric spacers that fit your truck and rim. Use the correct bolt grade for truck or car weight. Use locktight and torque to bolt grade specs. Your welcome.
@jacobjohnson39213 жыл бұрын
Good info y’all! Mad respect for y’all
@davidpham3787 Жыл бұрын
Do 2 inch wheel spacers affect performance?
@zulu03116929 Жыл бұрын
Thanks for the info bro!!
@FishingWithIbarra3 жыл бұрын
This finna be interesting..🤣
@jeters96203 жыл бұрын
I'm a automotive tech and have never seen any good from wheel spacers. I advise everyone that if they want that stance save your money and buy that wheel that gives you the stance you want along with high quality lift kits
@ericg4x42 жыл бұрын
Tell me what the difference is between quality wheel spacers are versus offset wheels. They put the same amount of leverage on the hub and bearings!
@twocooleetoh3128 Жыл бұрын
@@ericg4x4 he’s back in Cuba with no internet thus the delay replying
@JosiahMitchell-ju4mf4 ай бұрын
"I don't know what to do with my hands" 🤣🤣
@bubbask97823 жыл бұрын
They should do a this or that on which truck is better for each year
@kylemoskalick75293 жыл бұрын
I have the 2in titan hub centric and have had no problems with the 5 months I’ve had them
@ryancorra39952 жыл бұрын
How are they holding up now?
@texasgrillchef85813 ай бұрын
Well if you use a 12’ spacer of course it will be dangerous… is a 1/2” spacer more dangerous then no spacer… sure but by what factor. The factor of more dangerous is so small that other factors while driving are a bigger concern,
@jamesellsworth2402 жыл бұрын
I thought he was going to talk about the sandwich-style spacer that just pushes the wheels off the studs. I’d never use them, but it’s really the only option for pushing the wheels out just a 1/4”
@Isinipersonal Жыл бұрын
Is that not what he talked about?
@xs10z Жыл бұрын
Mullet wavin, AC/DC listening! Preach!
@jessemarblegaming6251Ай бұрын
I wanted to make Bigz run a lap 😂😂 I think I heard his name right 😂😂😂😂😂
@HoosierTactical3 жыл бұрын
I didn’t even realize how early I was until I read the comments. 😂
@ManCaverTools Жыл бұрын
Love the content you guys
@ruster74752 жыл бұрын
I have a 2004 Ford f150 I want to add spacers but I'm not sure if they are safe or not I don't do allot of hauling only when a friend or family is moving and I don't go off road unless I have to I just want to buy some thing that would be safe what do you recommend that is really safe atleast 2 inches or how many inches would be safe
@CustomOffsetsTV2 жыл бұрын
You’d be perfectly fine!
@xfxtchx34202 жыл бұрын
Are the rough county 2in spaces good to run with 12 wides
@jormungandr98403 жыл бұрын
I had supreme suspension billet 1.5" hub centric spacers on for a year then towed a trailer from NY to FL it was a few thousand pounds. Then I went to school for about 3 months driving 106 miles a day going 85-100mph while them on. Only reason they are not still on because a 2011 F150 leveled on 35x12.5's cant fit spacers. I trust them buy quality.
@nickcrill77183 жыл бұрын
Hey really want to see a 4Runner teir list!
@CustomOffsetsTV3 жыл бұрын
We shall see what we can do man!
@tylerw1774Ай бұрын
Video starts at 1:50
@TimeToBeKind3 жыл бұрын
If you want a set of them things, go to a college near you and pick up a set of Safe Spacers. Wait, did I misunderstood you? Thank you for the video. Everyone thinks that I have spacers on my truck, but it’s actually rims with a ridiculous offset. I’m almost done getting my truck painted and I’m in the market for 20x12 with maximum offset available.
@fortworthbassin83682 жыл бұрын
The whole reason I wanted to get spacers is so I don’t tip my lifted truck while doing donuts. So this video gave me my answer on if I should get some😂
@CustomOffsetsTV2 жыл бұрын
Full send!!!
@petezillakilla2422 жыл бұрын
Is it safe to drive 600 miles almost every weekend? I got a f150 w/ 35s, I want that extra stance. Please help
@sakurchanchachii21332 жыл бұрын
Are supreme suspension wheel spacers considered “high quality” ?
@CustomOffsetsTV2 жыл бұрын
We only recommend Bora's! Check 'em out here - www.customwheeloffset.com/store/spacers-adapters
@AK-ky3ou3 жыл бұрын
Yes, I run 1.5” hubcentric spacers.
@elijahreynolds56613 жыл бұрын
Yo love y’all’s brand keep it up
@CustomOffsetsTV3 жыл бұрын
Absolutely man!
@jonnyr66923 жыл бұрын
I need some 2” spacers for 2015 gmc 2500hd
@edgara.morfin73773 жыл бұрын
Day 6 of asking for a viewer's inport truck rating video 🔥🔥🔥
@henrymadigan1013 жыл бұрын
Are dual drilled rims safe
@CustomOffsetsTV3 жыл бұрын
Plenty of people run 'em with zero issue man! We've had thousands come through with zero issues!
@NoelK243 жыл бұрын
Question, will a set of spacers help improve my fitment on my wheel and tire set up, where my tire currently rubs on my lower suspension arm and sway bar at close and at full lock? Otherwise it clears everything else fine.
@kevinjimenez93223 жыл бұрын
Yes
@CustomOffsetsTV3 жыл бұрын
^ Yes it will
@haydensgolfjourney68433 жыл бұрын
Rate welder rigs !!
@NNaliek2 жыл бұрын
Can you tow with spacers?
@CustomOffsetsTV2 жыл бұрын
Yes you can, plenty of people do Keilan!
@321donnie3 жыл бұрын
Is it dangerous to use an adapter that has less lugs than oe?
@CustomOffsetsTV3 жыл бұрын
While not recommended it can be done with the mind set of it will not be able to haul/tow like it could prior
@5pectreCS23 жыл бұрын
I've bought $500 spacers and they still threw my damn wheel off
@1poinucantdothat9553 жыл бұрын
I need hostile fury 22x12s n tires I’ll let y’all pick ya dig how bout it huh 🤷🏾
@sebovara3 жыл бұрын
Dude reminds me of those wavy arm inflatables outside car dealerships. Sit on your freaking hands already.
@cameronfendercf3 жыл бұрын
i wanna see biggs run those laps
@elijahlining5940 Жыл бұрын
I65 runs the indy not 64 but besides that
@jonny555ive3 ай бұрын
So I clicked your link to go purchase spacers I put in the year of my truck I put in the bank of my truck... Dodge, and then I went to put in the model..... And there is everything except.....RAM Dodge Ram, truck, wheel spacers, aggressive look. NOT THERE..... What's up ? There's not even an option for your, "wheels and tire" combos for the RAM. Now, I know Dodge makes a lot of different things, but I'm pretty sure they're RAM trucks are the things that they make the most of, know what I mean ? So why wouldn't you offer them for what Dodge makes the most of ? Pretty confused on this one, not going to lie.
@CustomOffsetsTV3 ай бұрын
In our vehicle drop-down menu we split up Dodge and Ram because they formally separated into their own divisions in 2009. So under "brand" you should see Ram and then you can pick your model, 1500, 2500 etc.
@starcos55373 жыл бұрын
dang
@betogray97653 жыл бұрын
Day 11 of asking CO for a "Rating your OBS Fords" episode!!!!
@michaelf15073 жыл бұрын
I have 2” bora spacers on my f150 but the I don’t have a hub centric ring should I add the ring btw the wheels are aftermarket not oem
@CustomOffsetsTV3 жыл бұрын
Not really needd with the spacers
@michaelf15073 жыл бұрын
@@CustomOffsetsTV oh ok thanks!!!
@lukeroberts5501 Жыл бұрын
Im confused, they answered you saying “the ring is not needed with spacers” but in the video he literally says as long as they have the hub ring then running spacers is safe. So?
@dylansmith3 Жыл бұрын
@@lukeroberts5501 that confused me too lol but my adapters aren’t hub centric but what I did was get hub centric rings for the spacers to meet with the hub properly but for now my spacer to wheel won’t be hub centric. Hope the 10.9 grade studs hold up
@lukeroberts5501 Жыл бұрын
@@dylansmith3 ahh I see, thanks
@Hickey450 Жыл бұрын
I’ve seen many videos and cases of spacers failing. So everyone saying”I’ve had them and never had problems” your lucky. They’re garbage
@tightbudz3 жыл бұрын
Spider trax!! And.... They have a POUNDS PER SQUARE IN & FT POUNDS for a reason!! DO NOT OVER TORQUE YOURE FUKIN BOLTS!! Shhh.. Super secret!! They wont fall off!! Double super secret!! New lug nuts on "some" vehicles have (washer mounted lugs)... Those lugs, they just keep spinning.. Not like old lugs without the washers mounted!! Be careful, those spin very easy!! Dont ask me how i kno..
@Anonymous-im1fk2 жыл бұрын
Does anyone know anything about rough country spacers ?
@carcam360 Жыл бұрын
Have had them on my 17 silverado for at least a year now, running 33x11.50 No issues. Dont think they are hub centric
@dylansmith3 Жыл бұрын
@@carcam360 I’m installing wheel spacers that unfortunately aren’t hub centric, how are yours holding up? Was looking for some kind of insert that would give me the hub centric lip for the wheel to sit on but don’t think they exist. Think it’s either built hub centric or without
@carcam360 Жыл бұрын
@Dylan Smith they were holding up great! Unfortunately, my motofab level was destroying my front end. So back to stock. Wheels barly fit but looks good
@brandenloy94453 жыл бұрын
Not a fan of the added stress they put on your wheel bearings. Would rather get rims with the offset I need.
@2daaxe4head2 жыл бұрын
Add same amount of stress
@brandenloy94452 жыл бұрын
@@2daaxe4head nope, physics.
@sakurchanchachii21332 жыл бұрын
@@brandenloy9445 actually wider wheels, cause the same amount of stress as spacers..
@brandenloy94452 жыл бұрын
@@sakurchanchachii2133 if you understand the physics at play here you will realize you are wrong.
@jmarxful2 жыл бұрын
@@brandenloy9445 what physics? If you achieve a negative offset either by wheel or spacer the leverage placed on hub and bearings are equal.
@gabeb18443 жыл бұрын
I personally will never run them. I’ll just save up and buy the wider wheel.
@lukevanginkel73803 жыл бұрын
Saw a jeep that lost a front wheel on the side of the road today. Not a good day for them
@johnnorman66433 жыл бұрын
I’ve got 2 inch spacers on my f150 and seeing this video kinda scares me😂 I can’t remember the brand but they were around $225 in price but I’m not sure if that means they are good quality or not. Let me know CO!
@CustomOffsetsTV3 жыл бұрын
We're huge fans of Bora, but typically if they fit the hub and the hub bore of the wheel, full sends!
@johnnorman66433 жыл бұрын
@@CustomOffsetsTV thank you so much!
@twocooleetoh3128 Жыл бұрын
I’ve ran 2” spacers on my 2016 Sierra 1500 on 22” wheels 35” tires for five plus years. Never had an issue, but then again I thank my Lord Jesus Christ for being my copilot on every wheel spinned.
@lukeroberts5501 Жыл бұрын
What brand were they? I have the same truck and want to put 2 inch spacers on my stock 22 inch wheels.
@twocooleetoh3128 Жыл бұрын
@@lukeroberts5501 Bora
@lukeroberts5501 Жыл бұрын
@@twocooleetoh3128 towing and all no issues? How are the wheel bearings and other components? Also do you ever re-torque or swap to summer/winter tires?
@twocooleetoh3128 Жыл бұрын
@@lukeroberts5501 I DONT tow Never changed anything but oil 91000 miles
@lukeroberts5501 Жыл бұрын
@@twocooleetoh3128 no towing at all how come? Im assuming u at least haul somewhat heavy stuff in the bed?
@Tiye_murra3 жыл бұрын
Idk man my eBay spacers have been through some abuse and no studs have broke nor anything up front and I’ve been running them for about an year now
@Tiye_murra3 жыл бұрын
Ps I’m running a 20/12
@robbieomeara16493 жыл бұрын
Buddy always finishes his sentences like this
@crisantosalazar70413 жыл бұрын
Cool
@officialWWM2 жыл бұрын
Geez dude, lay off the coffee! Wheel spacers are illegal here in Australia…so that kinda answers that for us 😂