Watch Before Buying WHEEL SPACERS!!! BIGGEST MISTAKE

FFS LINK HERE: farfromstockst...
Here's why you wouldn't actually need BORA hub centric wheel spacers. All trucks are lug centric, so you don't NEED hub centric wheels spacers if they weren't recommended from the factory. These FFS wheel spacers are just as strong but half the cost
2011 GMC Sierra 2500HD Denali
6.5 BDS
Fox shocks
Cognito UCA
Boost autoparts
Edge Insight CTS2
22x12 Anthem Instagator
35x12.5 Fury OffRoad
Hornblaster
Dmax Merch: teespring.com/...
Peachbelt Merch: teespring.com/...
Bertrand850:
/ @bertrand85o
TruckMaster:
/ @truckmaster
mictuning.com
"SAM59308678" at mictuning.com for 10% off all light bar in the store.
Remember to follow dealeroptions:
Instagram: @dealeroptions
Website: dealeroptionsin...
boostautoparts...
Wheels:
shop.anthemwhe...
www.mictuning.com

[@manvanross]

Note to self: always check the comments before wasting my time watching the video...

[@musicguitar]

Lol literally clicking away after I post this comment. Thanks for the heads up.

[@Calbear707trees]

Yeah man. Thanks for the heads up. 👎🏾👎🏾

[@junoirm7713]

This clickbait. I was scared that I could have a problem like that if I put them on but no just clickbait!

[@hummerguy]

Doing the same thing here myself lmao

[@maxheadroom1165]

Click bait..

[@gratus0824]

Tell me about it

[@camrobot1]

God damnit!

[@aww4954]

Precious time wasted of my life

[@Ali-Muscle]

Yes !

[@chaseparker7022]

Yep

[@lh1678]

Yep Ross. Vid was a full-on waste of time, expecting some mommies little rich boy's truck to implode..but hey it reeled in over 100,000 of us.

[@buffalobmf]

Just buy hub centric rings. When you order wheels majority of them come with them

[@willmurphy3790]

Yup...wish I had that 15 minutes of my life back....first of all, those “more expensive” spacers are the same cast as you would buy off eBay, in fact they probably have a wholesale contract with an eBayer! They just stuck some stickers they made on there and some rubber caps on top of the studs and jacked up the price...in reality, hubcentric wheel spacers are designed for the front axle of a truck...the front wheels are the only wheels on knuckles that turn...and they are piloted by the hubs firstly and lugs secondly....the rear wheel doesn’t matter, as it doesn’t turn so there is no lateral torque against them...the most important thing with spacers is to make sure they are torqued, torqued again, and torqued probably three times after that...I’ve used 1/2” flange nuts as spacers on aluminum rims and 35s and they worked fine!!!it was actually more expensive to buy all that hardware than four 1/2” rings!! So I hope someone finds this helpful rather than listening to this kid who’s driving around a truck worth more than most people’s houses and doesn’t have the know-how to install his own spacers...sorry just can’t stand cheap chevys buttoned up to look nice....Constantly Having Every Vehicle Recalled Over Lousy Engineering Techniques...CHEVROLET!!

[@kevinz0681]

Not sure what you drive, but all manufacturers have recalls. And I have a few corvettes and they had some recalls, but so did dodge and Ford.

[@thekattner8805]

Very well put, friend! 🤙

[@FRANCHISPORTS]

Lexus then Toyota are the best cars and trucks in the world. If Lexus made a pick up I would get it.

[@EbolaSquirrel]

Install em right lol

[@beamz9187]

Nice pfp

[@louieatienza8762]

When you use a hub-centric spacer, the hub acts as a pilot which helps carry the load of the wheel. If you don't use a hub-centric spacer, then the only thing you're relying on to hold your wheels radially are the lugs. Also you're relying on the taper of the lug nuts to "center" your wheel, and there's no guarantee those tapers are machined concentrically. In machine building, the motors we use - whether stepper or servo, has a pilot on its base, similar to the hub on the axle, which fits snugly to a machined base. In this way, when the the motor is bolted to the base, the stresses on the bolts are limited to only shear, and they don't absorb much torsional stress.

[@justinshields4216]

That's well said. Another exple is this exactly why you don't use drill bits in an end mill. Always go hubcentric without question.

[@pathogen73]

Not to mention hub centric rings take away any vibration the wheels make.

[@officialWWM]

Yep, and that’s exactly how a wheel hub is designed to work. This idiot was looking for trouble!

[@tannercooper9355]

I have 3inch wheel spacers from eBay no nicks or anything on my truck and no problems with mine had them for 3 years

[@theurbanartist775]

That’s the answer I’m looking for. But have you toweled with them on. I want to buy some 2” spacers buys don’t want any problems while towing

[@HotRed00]

Tanner Cooper how many miles have you put on them that’s the real question not how much time you’ve had them

[@drock11]

Your my first dislike in 13 years of having my account

[@skankytrick]

Lol!

[@musicguitar]

Savage! 🤣🤣

[@DiegoRamos-fm2cr]

What a waste of time

[@firstnamelastname7675]

the honour was his

[@zacharerdowling5694]

Oh no his life is over now

[@grantmara769]

This is ebay wheel spacers with a fkn sticker on it

[@dillonthompson9656]

Don't use a impact on spacers..

[@watchmanexpert]

I don’t trust nobody with my spacer , one time the Mecanic didn’t ties the spacer ! So I always rotate my tires and retorque my spacer by myself

[@Alpha_z71]

to get the wheel to rest on the hub get some hub centeric rings.

[@erickanuho4996]

Looked better before the wheel spacers.

[@33NFL]

I used to run 2” spacers up front and 3” in the rear of my old Chevy and never had an issue

[@spencer1344]

Was it just a pavement princess though ?

[@danielg9679]

I got boras , I received them in perfect condition they came well packaged. So far I got them on with a 6 inch lift and they've held up really good no problems and I of road my truck pretty good..

[@jhamiljayjaire628]

where I can buy boras wheel spacer 6holes ?

[@Spankymf]

2 year update on the Bora wheel spacers? Any issues with offroad?

[@bobbybuchanan4156]

any issues after a couple years?

[@GrimGriefer_]

Any update?

[@Ali-Muscle]

I’ve been using my bora spacers for about 5 years now .

[@bestbomb17]

Mistake #1 ......didn't torque the spacer or wheel.....for gmc/chevy truck its 140 ft lbs.... you're welcome

[@tylerdirden3416]

I got my wheel adapters from BORA, i dont really recall any nicks/scratches but one of them did not wanna slid onto the hub on the rear. But this truck is a 99 z-71 with 240k miles, so i blame the hub really on that. They packaging was decent but minimum i think, but wheel adapters are HEAVY so they get banged up in shipping is y there always like that.

[@pathogen73]

Ive got an 03 Z71...mind sharing a pic of your truck if you still have it? I'd like to see what it looks like

[@markhilsen2700]

I heard “Hub Centric” about 1000x more than I needed to

[@fike301]

i get quite a laugh when these kids driving around in heavy duty diesel trucks costing upwards of 75k or more and they tow or haul nothing, but rather a status of parents income

[@joshualejarde6593]

Nobody’s fault your parents are broke. 😂

[@CPLtwinkie]

Is it a requirement when owning a diesel truck you must have a trailer on at all times? if you are not using your parents income you're using the bank. only difference is interest rate. thinking before speaking is a handy skill...

[@ThaBigSkyline]

What if I told you they built it that way because they like the way it looks? It’s an insane concept I know.

[@kregadeth5562]

J Fike yah the little pussies. Lol. You jealous bro? You sound jealous.

[@kiddonline504]

J Fike def sound like you’re hating bro lol it’s all about the look... that’s like telling someone don’t buy a hellcat or Ferrari if they aren’t gonna drive fast or don’t buy boots if you aren’t gonna do construction work lol it’s all about what you like

[@scottforbesjr6427]

2 inch rough country spacers came in flawless.

[@sball3]

I have hub centric spacers from US Wheel Adapters. I called in the measurements and they custom make them. Flawless finish, nice people. It did take a few weeks but I didn’t want any short cuts. My Fuel wheel mates to the spacer.

[@oscarespinoza7547]

Burnt Tofu did you get lug centric or hub centric? I ordered some but lug centric for my duramax debating to send them back and get hub centric or just stay with lug centric

[@enriqueo15]

dude a tool box in the bed of that truck would look so dope lmao even if there is no use for it!

[@JWMontoya]

I like the extra bed space for when I need it

[@DustyB1776]

Lmao to go get groceries would be about it. You should get a sick headache rack though.

[@HealthSupercharger]

It actually looks less good man.

[@alexlashley9839]

That’s a nice truck. Something tells me daddy bought it for you.

[@ryannedits]

shut up nerd

[@JWMontoya]

Something tells me you’re jealous

[@alexlashley9839]

No I would be embarrassed if I was you.

[@jeffthompson9589]

Paint them rear calipers JW. Truck looks good boss.

[@JWMontoya]

definitely!

[@JayRM714]

I bought aftermarket wheels for my car and I’ve noticed a lot of balancing issues, I’m using hub centric rings with them because it’s required, but I’m wondering if maybe wheel spacers will help with the balancing issues...

[@JWMontoya]

Jay Ryan wheel spacers won't help with balancing your tires

[@56raaman]

Use Bora hub centric Each set is custome made for your truck They are the best

[@JWMontoya]

They're not custom made. They're made per order

[@lowlifegarage]

No disrespect... but custom made is made per order. I'm sure you didn't mean to come across like a jerk but u did

[@radghorabi4316]

why do this strictly for look and not what that truck is going to perform like after the install, all you say is i like the look of this and i like the look of that, people who have trucks for look are just not practical or live at home with mom and dad.

[@derekturnbull2098]

Good god take those ugly wheel spacers off that looks awful!!!!

[@aldee3018]

mine came off of ebay and they were hub centric, it helps to center the wheel, the lugs won't help with centering the wheels not one bit. i've had them now on my jeep for a few years with no problems art all.

[@neckofthewoods24]

That’s because you didn’t install a centric ring for those wheels 🤦‍♂️

[@christopherwentworth2905]

Where I live if your tires sticks out of the wheel you have to put fenders over it

[@paedahe4975]

Or mud flaps in some states or you can get pinched.

[@parvariramin]

wheel spacers Hi all, Will the 25mm rear spacer and 20mm front spacer damage the wheels, suspension and bushing in the long run?

[@HansZuerner918]

i Accidentally jumped my single cab 1999 chevy s10 off sone train tracks with 2.5” spacers in rear and 2.75” spacers in front and they where fine. felt like i was 3-4 ft in air with lowering kit on. truck came off the ground Immediately and made everything inside the truck fly around.. laned flat rode away with no problems. using same spacer on my new v6 s10 and it does great

[@HansZuerner918]

then again thats an s10 not a full sized truck 😂

[@79dent]

@@HansZuerner918 and that’s also less wheel studs and a smaller spacer too

[@Brandonjenson309]

I got my bora spacers perfect condition no dings no scratches

[@JWMontoya]

so they just hate me

[@Brandonjenson309]

They must

[@chosenone1004]

They were 2 inch spacers ? I can’t believe how much of a difference 2 makes . They actually looked bigger then that . I’m thinking about putting spacers on my truck . It looked pretty easy to do

[@skankytrick]

That's what she said.

[@Q_StangGT3000]

Just a question. How come you didn't go with rough country wheel spacer again?. I don't want to wait a month either for some spacers

[@cooterbrown7681]

I ordered from custom offsets 2in spacers and still have not gotten them and its been over 4 weeks. Thinking about doing an update about it on my page

[@Nathan-nw9pd]

i know this is late, but those spacers are MADE TO ORDER so it takes some time.

[@jonathanragle9838]

$300 for wheel spacers for a full sized truck is extremely cheap. For that price you can file down a little dent. The ones I run are $700 steel spacers because I use my truck as a truck.

[@jaredpizzino6322]

What brand? I’ve had a hard time finding steel hub centric spacers.

[@dustintowsend9302]

Did you lock tight them and Re torque them after a few drives

[@johnarcher9480]

Wouldn’t re-torqueing defeat the purpose of the loc tight?

[@AngelIRQ0508]

I hate the tires/rice sticking out so much like that 👎🏼... woot woot 🍾🇺🇸

[@JWMontoya]

DURAMAX ANGEL I do 👍 woot woot

[@VIZZALIVE]

idk Montoya the volume of the intro literally made me shat my pants with earphones in but i love the intro itself!

[@JWMontoya]

SURPRISE!

[@Roboticdoughbull3k]

"This just in"! T6 6061 aluminum is t6 6061 aluminum, grade 8 hardened steel studs are grade 8 hardened steel studs, from eBay or a puff puff pass well known brand name retainer just turning a bigger profit off your naivety, fanboyism and faith in a sticker.

[@Chuassy]

Whimpie back legs is what you did. There is no argument there, it’s blatant facts

[@Igoriann]

I don’t get why people do this to their trucks unless they have fender flares to compensate for the space. It looks unnatural and stupid.

[@ttrapp6303]

They used a air gun instead of a torque wrench

[@the-man7062]

Who is going to be looking at your wheel spacers? So what if it has nicks or dings. They are going to be out of site

[@JWMontoya]

They wouldn’t sit flush

[@lmfscrew]

Yea don’t think I’d use spacers with any flaws.

[@JWMontoya]

Luckily they're just nicks

[@keithdomzalski6638]

Dude it’s like this u only spent 300$ on adapter/spacers that is cheap & a month ain’t too bad I spent right at $500 on a set of Adaptec Speedware hubcentric 33mm adapter not a scratch or nick on them & 2years later no problem. It’s like this why would u want to play with your safety & other ppls safety on the road. They only told u that u don’t need hubcentric cause they prob don’t carry them. Hope u learned a lesson. Safety first

[@christianrodriguez6529]

What are you gonna do with the straight pipe? Axle dump? 👀

[@304Shooter]

When I saw Johns truck in the intro :,(

[@xotiic_gaming6544]

they can last a really long time it just depends on how you treat your tuck

[@dannyv.7518]

If I recall, you did get your replacement spacer from Bora right? You even tried to give away the knicked one. At least thats what I remember

[@ToXSicK1340]

Rutttt Rowwww!?!?!?

[@JWMontoya]

nope! never got the replacement one. I talked about giving away the one with gauges. Good memory though!

[@grovesiderabbit]

I just saw a teenage tacuache truck video before this and I thought that was the dumbest video I've seen. Boy did you prove me wrong.

[@JWMontoya]

Thanks!

[@marcoslupio8009]

🤣🤣🤣🤣🤣🤣

[@986C]

The gayness of these two is off of the charts.

[@JWMontoya]

Thanks

[@parkerhilton8913]

Everybody that orders from bora is about a 2-4 week wait to receive them because they’re made to order basically. They’re not held in stock. Also even though you bought lug centric wheels you can get a hub spacer that goes into the back of the week and mounts on your hub which would make it hub centric. Just my two cents but

[@johnarcher9480]

Those spacers on those wheels are ridiculous. Also illegal in many areas. You were better off without them. Forget about “cheap” just look at the material. T-6 6061 with grade 12.9 bolts. I don’t care what they cost. Yes, Hub centric ARE better. If YOUR aftermarket wheels aren’t made to fit properly, that’s on the wheel MFG. You shouldn’t need hub spacers with aftermarket wheels. Get the spacing you want to start. EVERY wheel spacer is going to have nicks and scratches after 5 minutes off road. Bora is not the only option for hub centric.

[@wesleyyork324]

The back wheels being “whimpy” is called a bulldog stance and most chevys and gmcs naturally have it.

[@spenceranderson4045]

Yes all their full size trucks and SUVs have it. Come from factory that way. It's for off-road since you have better traction with having your rear wheels not directly follow front wheels threw the same "used" terrain

[@kgvlogs4038]

Yeah i helped my next door neighbor putting on the same wheel spacers you bought and it have huge cracks on his dually and they where dented.

[@CLS55-Fonz]

i find up to 15mm spacers ok and dont cause too much extra stress on suspension

[@everynameistaken567]

I would complain about the nicks on the spacers, but only because spacers are so overpriced to begin with. $300+ for 4 blocks of aluminum, they are making a killing on these they can afford to send another set.

[@jeremyhelmick1471]

Looks amazing. You possibly already answered this but is there a reason why you didn’t do a McGaughys lift on your 2500?

[@JWMontoya]

I'm going to soon!

[@lowhertzhighspl]

are u still able to drive-thru a bank atm drive-thru without rubbing?

[@jeromeburrasca6710]

Rough Country is the largest lift company in the world and they're products are made in America. Don't believe the hype of other companies that want better profit margins. I've never had a single problem with any of their products. TRUTH BOMB!!!! ;)

[@yeongkarsoon481]

i don't use aluminum i used solid cast spacer

[@downhilldaddy9346]

Not subbing, just passing by

[@truckerdaddy7124]

Why didnt you put them on yourself? Jk I know the reason.

[@dommybigshot21]

Does it do that in the thumbnail cause of the control arms ?

[@natureandrandomstuff]

I'd never do this to my truck. No f way.

[@jeremyhelmick1471]

I have a 08 1500 Sierra. I wanna got with the 7-9 McGaughys lift and UCA with the Add a leaf and Rear Hanger kit.. But I’ve been looking at the Rough Country CoilOvers 7.5 lift kit. And information and or help you can give me. Highly appreciate it I love your content

[@JWMontoya]

shoot, I have no idea about rough country coil over kit man! they seem pretty solid though

[@jeremyhelmick1471]

JW Montoya amazing thanks for reply 👍

[@jeremydunn9978]

I just got 2" hubcentrics there's no Mark's on them. Maybe some lazy idiot sent you used ones. I can definitely see that happening

[@danfrancis7258]

you do need hub centric rings not spacer spacers are to stick out your tires mainly the hubcentric rings would of saved you all the drama and money.

[@shawnsutube]

Scratches on a wheel spacer? Seriously?

[@ac4439]

Who's on first what's on second don't know who's on third

[@subscriberswithoutavideo-st3cu]

uk Ghost what are you asking me for?

[@pathogen73]

I' would be upset as well, bro. That's your money.

[@themechanic4222]

Surprise there’s no JACK STANDS. I don’t have the 🏀 to do that

[@aszic4784]

I like the part where it broke

[@handtracing4302]

Is it me or is this kid just constantly repeating himself but more whinny everytime???

[@JWMontoya]

Probably just you 😝

[@coreybanks5673]

quick question?? why buy spacers instead of just buying a wider rim if you want it to poke out. ijs This is my first lifted truck. just wanna know. what are the pros and cons of spacers. Holla back.!

[@JWMontoya]

with GM trucks, front sticks out more in the front. most lift kits push the front even more. it makes it more noticeable. With that being said, having spacers in the back matches the front

[@Ricco984]

New set of wheels cost in the thousands, new set of tires cost over a thousand, spacers are a couple hundred.

[@charleyfleming9037]

37” for a mall crawler, it will definitely get over them curbs.

[@JWMontoya]

Sure does

[@Yomamalony]

How does one change a flat tire on a lifted truck? Is there any jack stands that can lift a lifted truck?

[@optimoprimo132]

Blocks of wood

[@johnarcher9480]

Yes. High lift jacks.

[@aaronho4242]

Just use hub rings to make it fit your wheels and properly torquing a wheel on when it is off is absolutely bad

[@JWMontoya]

After market wheels do not fit on the ring of the wheel spacers since the diameter is different

[@MrCstone1]

video title should be watch before buying a duramax lol

[@jocapyoass9866]

They didn't Even put thread locker on😭

[@michaelkoldus1189]

Metal on metal equally scratches

[@mr.hoonigan4313]

He learned a new word today: hub centric.

[@kphuntingandfishing4337]

Mine have nicks and scratches and they aren't cheap ones either

[@bennymercer6343]

Always torque your spacers

[@bennymercer6343]

Noob mistake

[@puchitopuchito6531]

Nice intro !! 👍

[@JWMontoya]

Thanks!!

[@highwaystar8310]

Any parts you purchase should be perfect new condition with no nicks or scratches. This is what I hate about after market parts no quality control and customer service is a joke. Fuck those assholes and there shit quality parts...

[@tabathaleforce1253]

when are you going to fix your exhaust

[@rodneyjackson4707]

When You Gonna Straight Pipe It And Lift It?

[@JWMontoya]

Before Daytona

[@pedroblas100]

where your order bora spacers....

[@user-iz3gn1rz5c]

Is 30mm safer??

[@kuttmowf]

I was hoping to see your tire break off. Should've known this video was made in china. Or made by china. Lmao

[@JWMontoya]

LOL you dumb af

[@losg90]

Talk about click bait in the picture

[@pedroblas100]

how about hub centric rings

[@AwDaAwesome91HD]

Where did u get that duramax mafia sticker

[@frostybandit1]

Never use aluminum spacers