Offset Printing Process with Heidelberg SORD Printing Machine 64x95.5CM by Expert Operator

Offset printing
Offset printing is a common printing technique in which the inked image is transferred from a plate to a rubber blanket and then to the printing surface. When used in combination with the lithographic process, which is based on the repulsion of oil and water, the offset technique employs a flat image carrier. Wikipedia
Rotary press: 1843
Printing press: c. 1440
Lithography: 1796
Solid ink printing: 1987
Hot metal typesetting: 1884
Digital printing: 1991
Laser printing: 1969
#Custom_Printing

[@bigsidable]

Best career I’ve had. 35 year press operator. From A.B.D To 8 Color 40” Mov. Just love that job.

[@blodekont5458]

1:09 alwys work from middle to outdides it what my offset teacher told me in 1990's. Few years later I got understanding why, I got to operate Sor-D big manual press, but here multipkle people have task.. in Netherlands you operate it alone. Later I got to work with Speedmasters ranging in sizes, all operated by one person, also the 8 tower Heidelberg Speedmaster 102-8-p

[@6r4metroman]

It just amazes me, all the safety guards have been removed and you have two operators running this machine… Oh my lord

[@hans-jrnmortensen5032]

Hi! You are absoluty Wright! Some day, they will fell the paine! By the way, I ran a Komori 526 all by my self for almost 20 years! All my safety guards was on the machine! So I have all my bodyparts! 😉😉😉😉😉😉

[@tompotter5981]

Really why do they need two guys to run a single color. We had a 2nd pressman on a 5 color Heidelberg. The Miehle 138 and Heidelberg 240 had only one guy.

[@hyacinthazumah3474]

Yes the Sord is an amazing printing machine - Azumah Dallas Texas USA

[@thomasw6246]

In Germany we call that "Klitsche". But much much respect for this Guy's!!!

[@terrysmith7441]

Love the job, seen it from oldest 4 color packaging board, to heidelberg, to RZO my favorite, never big on Miehle. I loved the work but the industry went from 5.000 impressions to 10,000, and now 15,000, manning would seem to be a big issue I saw one man run a 4 color 30 inch, before blanket washers, the work had its long term effects on psyche.

[@johnreybayarcal7748]

I like heidelberg offset machine,

[@rotanaoussama4782]

Love "offset"

[@evertcastroaza4111]

Ellos si son unos capos, se nota

[@user-wz1kt8hv3p]

Operator are very expert

[@fernandojvalencia8151]

Put him on a 4 color? He will lose his mind! Single color printing is so boring I need a bigger challenge....

[@shriniwasnaidu882]

Very nice machine 👌

[@shahriarmahfug2036]

Wow nice printing

[@aslanaslan7792]

Die Maschine geht nicht so einfach kaputt wenig Electronic Sensoren top👍

[@uttamthapa2579]

Heidelberg is the best for easier operating and good printing 😍😘

[@KK-gc5lj]

Does it print school textbooks too? What is the price ?? Any other information , kindly share it 🙏

[@uttamthapa2579]

i operate Heidelberg last 23 years . 😁😁😁

[@tompotter5981]

I watch a lot of videos like this. Many seem to be from Asia and Mexico. The working conditions are an abomination. Don't these places get any government safety inspections? In the US we have OSHA inspections. Too many violations and the whole plant gets shut down.

[@pingpong9005]

At around 6.50.. the video is played at 2x speed...if u notice carefully

[@davewickizer4506]

More than one guy on a single color 36" would be lugury and waste full. I ran to 40" by myself for a minute love the press though. Ran everything they made except one of sords before retirement

[@fkthesonofnso906]

Am a printer in Cameroon bamenda wat can I do to have a printing pass

[@cumillatube2867]

Sord Printing Machine Price?

[@GráficaLetras]

nice Job👍👍

[@teodorocruzg.3456]

Otro pedo. Kn. Las eidelberg ay no ay falla. Saludos. Suerte.

[@MazharKhan-rh1lt]

Very high speed

[@azmatfatima8288]

Beauty

[@RajkumarSharma-vp8gk]

Maine is machine per kam Kiya hai Shivani offset mein s Chand and company Delhi mein kab Khali hun koi jagah ho to batana ji

[@davewickizer4506]

How many guys on a simple press like this? I never had anyone help me after I started running the press and was expected to produce of you want paid. Average 6 washups and 50000 a day was expected. Didn't matter how hard the job was. Sure would've like to have had some help feeding for sure

[@adlanouadlanou3634]

دظ

[@DeusEstAmor________137]

You can imagine I have press and operator says I need one helper otherwise he'll not work lol .

[@fernandojvalencia8151]

​@@DeusEstAmor________137 find a pressman who's head isn't big? This is a one man press period. You can train a new one who will listen to you..

[@rodrigosolano5536]

Un saludo desde colombia

[@casperakoma7273]

Hi thanks for sharing this video.I looking for a service repair manual for that machine kindly assist.

[@kaiinselmann7275]

Gelb rupft ab. Zu frisch weiter gedruckt. Zwei Druckmaschinen aber zehn Personen im Raum. Wieso zwei Drucker an diesen kleinen Maschinen?

[@user-qf3uu7zo4y]

Я работал на такой машине ,очень хорошая .

[@richardavie981]

Please SORD and KORD offset printing machines which one is more preferred? Your answer will be helpful as a startup.

[@nagvicky]

Sord

[@jeffdewan3068]

Sord is so much faster than a Kord I cut my teeth on one and it’s still one of the best presses I’ve ever run. I can almost smell the shop they’re in

[@alpana6048]

La SORD est une véritable presse offset avec l’architecture encore actuelle donc plus aboutie que la Kord qui est une presse typo transformée en offset pour faciliter le passage à l’offset des conducteurs typo 😊

[@tompotter5981]

A SORD is 25x36" A KORD is 18x24". That's kind of a weird size. It depends on what kind of work you want to do. The KORD will do a good job but is slightly outdated. The SORD is still competitive and it is certainly faster. On older machines you have to worry about the availability of replacement parts.

[@fernandovalencia3542]

​@@tompotter5981Heidelberg has all replacement parts for Kord! There are businesses who also make replacements for any press.. nice try.

[@feliperodriguez9121]

¿Y asi la corren en seleccion de color?

[@eramdamvlogs9571]

Hello sir this is 6 colour or not

[@sirig1704]

I need this type of printer how much this cost?

[@mohammadnaim4209]

Brother, where is this Comilla Ajmeri Press

[@HaleemUddin-jn8tr]

Where is location sir

[@printlinkarvind8501]

My requirements

[@celebritieslifestyle4623]

Where this press maybe India

[@sidharthahalder9204]

Nope it's Bangladesh

[@kim__jong__un]

This machine looks so dangerous, all rollers are open and exposed. Also, a lot of work on the press because two colors printing in one pass...

[@fernandojvalencia8151]

Indian's don't know how important guards are? Why do you think they came with the press? For looks...You can't teach , dumb!!!

[@mdredoykhan6792]

❤❤❤❤❤

[@fernandomunoz988]

Ajuste con puro tacón...

[@user-vu1cj4xn1d]

Poster 18x22 video bhai sahab dalo

[@rodrigosolano5536]

De donde es este canal

[@hussenahmad5451]

Bhai Aisa machine kidhar hai mere ko kam milega kya machine per

[@tjphonetvvlog2462]

Na memis Kona mag work dto

[@fernandoquinteros1849]

Para el proximo video mejor si lo ponen en camara lenta Jajaja

[@shadatoverprint6743]

Need a offset printing operatot for gto offset printing machine

[@jaysahu5998]

I'm offset machine operator

[@fernandovalencia3542]

I will teach you to run GTO...

[@jaderobertson7694]

I have a printing press in Ghana and I need 3 good offset printing machine operatos

[@sunnyjaiswal3226]

Im intrested

[@rajansth3456]

@@sunnyjaiswal3226 contact

[@fernandojvalencia8151]

Will you fly me over there I will make a million dollar business for you!!😂

[@nurnabi7259]

Hi

[@Rakib80301]

আমি এই মেশিনে কাজ করতে চাই।

[@selvaraj1908]

Price, location, photos

[@rahidigitalart2269]

मुझको इलेक्शन के पोस्टर प्रिंट करवाने है किसी का नंबर होगा दिल्ली NCR का जो जॉब प्रिंट होने के बाद बस में लोड करा दे

[@kafeelkhan371]

9015919658

[@sunnyjaiswal3226]

7905968090

[@sunnyjaiswal3226]

प्रयागराज

[@dp369]

Another un-guarded machine, and the operator has the brass neck to wear a Heidelberg shirt. lol

[@gzeeshang8600]

Hello g

[@gzeeshang8600]

Hy bro

[@prakashbundela3393]

Hii

[@hussenahmad5451]

Yah machine kidhar hai humko yah machine boiler menka job milega kya

[@skjunayedkhan4272]

vay calar

[@hussenahmad5451]

@@skjunayedkhan4272 kaun sa jagah mein samjha nahin

[@hampton8474]

any advice for a beginner. I'm in the printing and graphics training program at my trade school I'm in my senior year and I've been working with a 2 color offset press. I've done 3 jobs so far this year I'm extremely interested in offset printing I like it a lot! But i feel I make a lot of stupid mistakes working with them. I'm just wondering if anyone has felt like this before and maybe can give me some advice. Thank you

[@FrankVT9]

Hey there starkiller, so you've entered the world of printing. It can be a bit overwhelming at first but only experience gets you better thus reducing the mistakes. Yes, I've made plently when first starting off but those mistakes taught me what NOT to do.. LOL. Some words of advice.. don't try to be as fast as other experienced operators, it only leads to mistakes and at worse can possibly lead to an injury. If you had the proper training and you keep doing your job correctly you will soon realize your confidence level goes up and somehow.. just somehow you're much faster at what you do. Let the speed come to you, don't try to chase it. Pretty much like most everything in life. Nothing is "etched in stone" within the printing trade so always keep an open mind and don't be afraid to think outside the box. Finally NEVER let a press run you... YOU run the press, it's very easy to fall into this predicament during a more complicated or problematic run. If you find yourself getting frustrated and losing control grab some fresh air then attack your issues with a more clear head. Hope this helps you, good luck with everything 🙌🙂.

[@hampton8474]

@@FrankVT9 Thank you :)

[@foxbat2581]

Printing is a trade that you can take a lot if pride in because not many people are good at it. I ran a Hamada 611 with T-head for 7 years an it is a lot of trial and error, every machine is temperamental so you have to learn. What is going to work for each one. We all started where you have so please continue the trade. Again, not a lot of people can print and I have a lot of respect for anyone that can.

[@hampton8474]

@@foxbat2581 Thank you I really enjoy working with offset. I like it a lot better than doing InDesign and photoshop stuff. This might sound weird but I really wanna continue this field in printing but I feel like I'm not even good enough to even continue learning in this type of work I feel like I should be better than what I'm doing now.

[@foxbat2581]

@@hampton8474 what is it that is making you feel like you aren't good at it? Is it paper feed or ink consistency or something else? I took graphic arts in the early 90's and came out of trade school thinking that I knew a lot until they put me behind a press in a business setting. We ran envelopes, 3 sided bleeds, coated stock and everything in between. Don't give up if you like what you are doing, it is an art. It took me a solid couple of years running 8 hours a day when I considered myself good but I hardly turned my back on the press because it was constant monitoring. Stick with it you will be respected for your trade.

[@rajansth3456]

Facing some problems contact me

[@bavelynalbos7576]

Hahaha very past forward the video

[@VICKYRAJPUT-uo4wv]

🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣