Cutting the Muffler Off A Honda Shadow?

  Рет қаралды 42,037

TJ BRUTAL CUSTOMS

TJ BRUTAL CUSTOMS

Күн бұрын

Пікірлер: 53
@awizardalso
@awizardalso 5 жыл бұрын
First I ran a 3/8" drill bit welded on a rod and a centering ring up through the two pipe end caps in the mufflers. Not loud enough, so then I went and drilled again with a 1/2" drill bit. I finally ended up running a 3/4" stepped drill bit on an extension adapter up through the end caps in both mufflers. Perfect! I like the way the mufflers and pipes look on the bike. The mufflers originally were so quiet I almost couldn't tell the engine was running.
@donaldkondi2979
@donaldkondi2979 2 жыл бұрын
If you guys want a quick and easy way to stabilize the inner pipe grab a metal penetrating screw and drill it in through the bottom till it pierces the inner pipe aswell
@donellophillips8417
@donellophillips8417 4 жыл бұрын
I just took my baffles out and got a sweet sound now
@fahad6568
@fahad6568 3 жыл бұрын
Did u need to re Jet the carbs?
@chandlerharris3812
@chandlerharris3812 4 жыл бұрын
Good info thanks for the heads up, I wouldn’t have thought about that inner tube
@dnice4431
@dnice4431 5 жыл бұрын
Good info my man. I did not know that. I actually got a set of your back draft exhaust. Once the bike is painted they go on in reassembly.
@chandlerharris3812
@chandlerharris3812 4 жыл бұрын
How do you like those backdraft pipes? Are they too loud? They looks like a good choice but I’m worried I’m going from too quiet (stock) to way too loud. Thoughts?
@spaceworks2256
@spaceworks2256 Жыл бұрын
I know this is way off topic…. But I have a 2000 Honda shadow ACE is there a way to put velocity stacks on or is that a big hell no. It’s my dads bike and I want to bob it out in his memory. I just having issues finding an intake for it. It’s gonna be a budget build. If any ideas please let me know.
@TJBRUTALCUSTOMS
@TJBRUTALCUSTOMS Жыл бұрын
if its an 1100 or a 750, yeah we have dual carb stacks and performance tuning kits and exhaust on the site! =)
@catoway74
@catoway74 5 жыл бұрын
Hotdog in a hallway!😂😂😂😂😂😂😂😂😂😂😂😂👍🏼😅✌🏻️
@MarkoftheMouse
@MarkoftheMouse 5 жыл бұрын
I didn't realise about the inner pipe. I have not cut or done anything to my exhaust on my 600 but i believe the inner must have come away from the outer because i get a rattle from inside the front exhaust when the bike gets hot.
@Gatorsdad
@Gatorsdad 3 жыл бұрын
just waiting for you guys to restock of your pipes. 2003 honda shadow ace.
@justjoshin5394
@justjoshin5394 5 жыл бұрын
Is there a way to delete the fuel pump on my 98 750 ace? To clean it up and simplify the fuel setup
@notchriswells
@notchriswells 4 жыл бұрын
Hey, man. I know this is an old video, but at :20 you said that pre 2004 750s have double wall pipes. I'm considering cutting my 2007 vt750c2 pipes and was wondering if I have to worry about double wall pipes on it. Anyways, thanks for alllllllllll the info you put out for shadows.
@HardKnoxKustomz
@HardKnoxKustomz 4 ай бұрын
Yes you do. I just did mine. Exact same bike. I cut about 3 inches from the manifold flange, pulled the inner wall out, and welded the flange back on after cutting the remaining inner wall out of the flange. No inner wall. Just outer wall throughout the whole exhaust
@gsxrha
@gsxrha 4 жыл бұрын
Can i chop exhaust and add baffles without any modifications to carburetor
@willholmes275
@willholmes275 4 жыл бұрын
I second that
@WIGSLY
@WIGSLY 5 жыл бұрын
My 97 vt600 had the headers cut just short of the mufflers by the previous owner and while it sounded way leaner than stock I was losing out on performance and probably doing damage. If I had kept it I probably would have fixed it the right way
@Tom-tq5oq
@Tom-tq5oq 4 жыл бұрын
My guy rocking the freaking INCITE shirt 🤘
@richardboyles8715
@richardboyles8715 5 жыл бұрын
Does this include cutting out your baffles? Would it cause the same problem?
@jacaughron55
@jacaughron55 3 жыл бұрын
And what if it’s debaffled
@victoriajordan4792
@victoriajordan4792 5 жыл бұрын
How bout the 1100 ACE? Double pipe?
@stackumz
@stackumz 5 жыл бұрын
Did you ever do it to your 1100?
@kevinrubio7773
@kevinrubio7773 3 жыл бұрын
How did you tune your bike afrer cuttuing off the mufflers? Sorry still new at this. Got a 94 VLX 600
@stephengibson5221
@stephengibson5221 3 жыл бұрын
Re-jet the carb with a size larger jets. You'll have to research your size. And what size to go up to.
@vamisk
@vamisk 2 жыл бұрын
Does this apply to the vt750c, from the 80s? I find almost no support for these year shadows
@zacagraniotis
@zacagraniotis 3 жыл бұрын
Hi I have a 2010 400 shadow where do I cut and put on a slip on
@ChrisCornett-c1y
@ChrisCornett-c1y Жыл бұрын
can I still use the exhaust if those inner pipes come out just curious lmao I’m dumb when it comes to these things
@ChrisCornett-c1y
@ChrisCornett-c1y Жыл бұрын
@@TJBRUTALCUSTOMS alright thanks cause my inner pipes broke inside and ain’t got the money to buy a new exhaust yet lol do I need take exhaust off bike in order to take them out of the pipe
@ChrisCornett-c1y
@ChrisCornett-c1y Жыл бұрын
@@TJBRUTALCUSTOMS I didn’t no if I could use the outter pipes or not
@TJBRUTALCUSTOMS
@TJBRUTALCUSTOMS 8 ай бұрын
not sure how youd get the inner pipes out lol
@HardKnoxKustomz
@HardKnoxKustomz 4 ай бұрын
@@ChrisCornett-c1ycut the flange 3 inches back from the top, pull the inner wall out (may have to make another cut in the center of the bend), pull out the inner walls, use a Dremel tool to clean up the inner wall out of the manifold flange, weld it back up, and enjoy… I’m dumb too 😂 it sounds freakin amazing. Deep guttural growling demon
@randyjohnson6640
@randyjohnson6640 4 жыл бұрын
TJ what what's the best kind of bracket to put at the back of the front inner pipe to keep it from cracking and breaking
@mikepeterson4061
@mikepeterson4061 5 жыл бұрын
We cut off the pipes (my dad and I). We have been stuck on what to do next. He also cut off the mounts otherwise I would just re-buy stock pipes at this point. Should I just buy new pipes? If so does anyone have any suggestion on which ones to buy?
@laughsz914
@laughsz914 5 жыл бұрын
Hey if I cut my pipes or get straight down pipes and your carb stacks what do I re jet my single carb for I’m not good with the whole carb situation please help
@dakodagowen1495
@dakodagowen1495 3 жыл бұрын
Anyone know where it find custom pipes for a 1988 vt800 ?
@CooperJohnson-pz5xu
@CooperJohnson-pz5xu Жыл бұрын
I have chopped pipes on my Honda shadow 750 and I have gas coming out of my exhaust alot of gas what should I do
@CooperJohnson-pz5xu
@CooperJohnson-pz5xu Жыл бұрын
@@TJBRUTALCUSTOMS I really can't afford to take it to a shop could I not do it my self
@CooperJohnson-pz5xu
@CooperJohnson-pz5xu Жыл бұрын
Ok so I been leaving my gas's on or my petcock in the on position u think that could be why I am seeing this problem?
@CooperJohnson-pz5xu
@CooperJohnson-pz5xu Жыл бұрын
@@TJBRUTALCUSTOMS could I just drain the oil and start over
@CooperJohnson-pz5xu
@CooperJohnson-pz5xu Жыл бұрын
Ok so I need to pull the carb fix the float and what about drain the system how do I do that drain the oil and gas?
@zx12r11
@zx12r11 Жыл бұрын
Mine did the same thing, about a month ago it was the needle in the float not sitting right. Did a oil and filter change. Im fixing to do a oil change and filter just for peace of mine😅
@rinopiccolo8712
@rinopiccolo8712 4 жыл бұрын
Ciao non so come procurarmi quelle marmitte drag pipes per la shadow 600vt ma si trovano in commercio ho sono artigianali mi puoi aiutare mi consigli un sito dove posso trovarle grazie
@jacaughron55
@jacaughron55 3 жыл бұрын
Yeah why isn’t there a video showing how to cut it
@MrEithan1320
@MrEithan1320 5 жыл бұрын
Tnx for the FYI
@camo_fisherman
@camo_fisherman 2 жыл бұрын
Can make a set of pipes outta PVC!?!
@camo_fisherman
@camo_fisherman 2 жыл бұрын
@@TJBRUTALCUSTOMS funny story my friend who is not very mechanical inclined did exactly that! The kicker was his wife had to explain to him why he couldn't use PVC!!! I love ribbing him about that to this day! LoL
@camo_fisherman
@camo_fisherman 2 жыл бұрын
@@TJBRUTALCUSTOMS I'm leaning towards a life sentence! LoL... Thank you for your content it is very helpful and to the point. Thank you for taking time outta your day replying to my comments!
@thatdamnmescin
@thatdamnmescin 5 жыл бұрын
Do you have to rejet if you cut the pipes?
@jacobdurham2886
@jacobdurham2886 4 жыл бұрын
I have a 04 shadow Sabre vt1100c2 if I cut the exhaust off and leave it straight pipes what would be the best jet kit to run for that?
@MrArnie1963
@MrArnie1963 2 жыл бұрын
Thanx
@jamesrichmond4865
@jamesrichmond4865 5 жыл бұрын
Hahaha hot dogs !
Which Honda Shadow???
7:03
TJ BRUTAL CUSTOMS
Рет қаралды 19 М.
1996 HONDA SHADOW| GETS MUFFLER CUT OFF
7:36
Smelvinvlogs
Рет қаралды 12 М.
Что-что Мурсдей говорит? 💭 #симбочка #симба #мурсдей
00:19
Sigma Kid Mistake #funny #sigma
00:17
CRAZY GREAPA
Рет қаралды 30 МЛН
Biggest Mistake Honda Owners Make
12:03
TJ BRUTAL CUSTOMS
Рет қаралды 114 М.
Stock Air Box and Hose Removal for Honda Shadow VT600 and VT750
5:19
TJ BRUTAL CUSTOMS
Рет қаралды 178 М.
Extra tips on removing your exhaust baffles
3:19
@taydun1
Рет қаралды 31 М.
Honda Shadow VT600 Exhaust Modification
7:24
Around On A Bike
Рет қаралды 72 М.
Ripping Honda shadow 750 (Vance & Hines exhaust) pure sound
6:36
Blake Stunts
Рет қаралды 144 М.
Lets chop up a Honda Shadow 600!  Part-1
10:08
House Of Choppers
Рет қаралды 40 М.
Что-что Мурсдей говорит? 💭 #симбочка #симба #мурсдей
00:19