I needed and unusual size the complete my circuit so decided to cut a piece of track to fit .My first attempt at this but I'm happy with the result
Пікірлер: 55
@dannywiley40728 ай бұрын
Harry, I am glad Boone mentioned to watch your videos. I could watch your content all day. Great info and easy to watch and understand. Loved seeing the track modification. I also have Carrera track.
@SCALE_SLOTCARS8 ай бұрын
Ohh wow I didn't know Boone mentioned me 🫢 Danny I'm so sorry I'm only getting back to you now...I'm not getting notifications on my phone lately...Thank you for your kind comments, very much appreciated. I can't believe your comment sat here for 6 days unanswered 😯 sorry fellow slotcar fan 🙏...Harry
@dannywiley40728 ай бұрын
@@SCALE_SLOTCARS no worries Harry.
@Drummerboy67Ай бұрын
Howdy Harry ,Thanks 4 the tips,nice layout 👍🏎️🏎️🏎️
@SCALE_SLOTCARSАй бұрын
@@Drummerboy67 hi 👋 happy you are watching. Thank you about the layout 🤗
@robertsale65289 ай бұрын
Great video Harry, Boone did something similar with Scalextric track last year. Thanks for sharing buddy 👍👍👍
@SCALE_SLOTCARS9 ай бұрын
Ohh Boone did it ...I bet way better than my effort 🫢 I'll be watching a lot of his posts soon as I get to scenery 🙂thank you for watching Rob 👍
@SlotCraftMaster8 ай бұрын
Very useful video Thanks for sharing
@SCALE_SLOTCARS8 ай бұрын
Hi 👋...your welcome. Happy I could help ☺️ thanks for watching and commenting...Harry
@nobodyshome7585 ай бұрын
Especially handy since getting short pieces is really hard right now! Great job!!
@SCALE_SLOTCARS5 ай бұрын
Thanks 🤗...yes I had to do it because I just couldn't get a piece this short so at least I know its now possible to do . Appreciate you watching and commenting 🤗...Harry
@MichaelBatchelor-q8e8 ай бұрын
Well done Harry, great video and I'll be having a go when I think I'll be able to make as good a job as you. Oh what about the track perimeter pieces you get, i suppose you can do the same?? More tips please. Regards Michael 👍 Harry, the exterior overuns on the corner sections that clip on the outside of the track. 👍
@SCALE_SLOTCARS8 ай бұрын
Hello Michael , thank you ,I'm happy it didn't turn into a disaster 🤭🤣 I don't understand you question about track (perimeter) maybe you can rephrase it ... Thank you for watching and commenting.🤗...Harry
@DNASlotCars8 ай бұрын
Nice video, Harry!
@SCALE_SLOTCARS8 ай бұрын
Thank you 😊 at least it worked 🤣 and no injuries, which is always a plus 🤗thank you for watching and commenting 👍
@SpareRoomSlotCars9 ай бұрын
nice track adjustments. keep up the good work
@SCALE_SLOTCARS9 ай бұрын
Thank you mate 👍 having fun 😁
@leiftoudal79969 ай бұрын
Great video Harry :-) I do this with my old Fleischmann track by simply sawing through the whole track piece. Works fine. A trick for your method for cutting the rails would be to keep them in place while cutting by some masking tape.
@SCALE_SLOTCARS9 ай бұрын
Hi yes that's a good idea to hold the rail in place .now I know how to do it I don't need to worry about having to cut the track again . I know a fine toothed saw could do this easily but hadn't one available at the time 😊,thank you for watching and commenting 👍..Harry
@droneon299 ай бұрын
Hi Harry, nice job, it just goes to show that you don't have to stick with what you buy in the box, and the finnised item looked great, I bet there isn't too many people who would of done that, take care......... Colin 😊
@SCALE_SLOTCARS9 ай бұрын
Thanks Colin...I really wanted to show you don't need computer software to design a track ...any gap in a track can be filled to complete the section .thanks for watching mate 👍
@BigDaddyCaveman18 ай бұрын
Excellent Tutorial!
@SCALE_SLOTCARS8 ай бұрын
Thank you very much mate 👍 I had fun doing it for the first time, so I won't be afraid to do it again 😀 Greetings ...Harry
@mercedes011009 ай бұрын
I did run into the same problem with my lay out. I needed a smaller piece than a 1/4. honestly I am surprised that Carrera does not offer smaller pieces for the perfect fit thx 4 the video
@SCALE_SLOTCARS9 ай бұрын
Yes it would be great if they offered a 1/8 piece ,I'm sure a lot of people would find it the perfect finishing piece for many circuits . Thank you for watching and commenting 👍...Harry
@_Dave_S9 ай бұрын
Nice work Harry! Sometimes you have to change plans and make adjustments. Clever to cut the piece to fit. I am glad to hear you sorted the pipe issue as well! Stay warm!! Cheers!
@SCALE_SLOTCARS9 ай бұрын
Thanks Dave 😊 minus 32 degrees yesterday so it was perfect to get it fixed that morning 🥶I'm really happy I got the track piece done as it was my first time to try , always good when a plan works out 🤗 thanks Dave 🙂👍
@ted.slotcardaddy9 ай бұрын
Absolutely awesome Harry, enjoyed you working and problem solving, great video my friend
@SCALE_SLOTCARS9 ай бұрын
Thank you very much 😊 It's great when an idea works and filming it makes you try that little bit harder 🤣 at least for the future I know I can do it again if needed . Thanks for watching and commenting mate 👍...Harry
@Thr33BeanRaceway9 ай бұрын
Nice Mod Harry. Coming along well.
@SCALE_SLOTCARS9 ай бұрын
Thank you .it's going slowly but getting there 🙂
@garypaisley9 ай бұрын
What a coincidence, I'm cutting a Carrera track using a Dremel cutoff wheel, and a small (9") table top bandsaw.
@SCALE_SLOTCARS9 ай бұрын
Ahh cool 😎 I hope it all works out good for you, the proper tools always make it so much easier. Thanks for watching and commenting 🙂..Harry
@davegedeon37679 ай бұрын
Harry, I am sure you know that you could have purchased a quarter straight that is 3.4 inches long from Carrera. I have 3 of these quarter straights on my Scalextric track.
@SCALE_SLOTCARS9 ай бұрын
Hi Dave, 🤗I have quarter straights ,this was way shorter than that, more like an eight and also not equal on both sides .Carrera definitely don't do anything remotely similar...its a pity they don't do a 1/8 straight, I'm sure it would be very useful for many track builders 👍 thanks for watching and commenting 👍...Harry
@davegedeon37679 ай бұрын
I understand now Harry. You need a 1/8 straight. Good job on cutting it from a longer straight. You are very talented.
@SCALE_SLOTCARS8 ай бұрын
Thanks Dave ...I blunder my way through stuff 🤭don't look too close 😂
@tcase1018 ай бұрын
Oh man I have a couple of gaps on my track that this would fix. I’ve got plenty of extra straight pieces!
@SCALE_SLOTCARS8 ай бұрын
I am happy it might have helped in some way ☺️ sorry for the late reply... I never got the message notification. Thank you for watching and commenting... Harry
@slotcardude689 ай бұрын
Nice tutorial, thanks for sharing!!!!
@SCALE_SLOTCARS9 ай бұрын
Thanks Nico 😊 I'll get to look at your post tomorrow mate 👍
@sweetybnz74825 ай бұрын
Great video. It makes me wonder why people mask the rails when they paint their track. Why not just remove the rails,paint then reinstall?
@SCALE_SLOTCARS5 ай бұрын
Thank you 🙂It would be a big job to remove all the rails and very difficult to get them all connected properly afterwards. I would definitely just mark them off to 🤗 thank you for watching and commenting 👍
@kool-k-kel7 ай бұрын
there`s me thinking subtitles on ... thx fella. appreciate the tips on making fish plates (model railway fan as well) clamp on rail.
@SCALE_SLOTCARS7 ай бұрын
Lol, I wonder sometimes do people see my channel name and don't even tune in because they expect latvian ... I'm happy for your comment because maybe I should put (English language)somewhere in the title photos 🤔 glad it was helpful and zi appreciate you watching and commenting 👍...Harry
@kool-k-kel7 ай бұрын
aye no worries , im waiting for my new pieces to arrive and give it a try.got a dremel,got glasses,got hot glue, steady hand... hmmm. i doubt!@@SCALE_SLOTCARS
@SCALE_SLOTCARS7 ай бұрын
@@kool-k-kel let me know how it goes 🙂👍
@kool-k-kel7 ай бұрын
will do , hopefully get a bit of vid up of it, limited space (3.4m x 1.6)@@SCALE_SLOTCARS
@bretfaulkner8 ай бұрын
awesome.God bless.
@SCALE_SLOTCARS8 ай бұрын
Thank you 😊 and thanks for watching and commenting 👍...Harry
@ungurdani83468 ай бұрын
Salut my friend super car super video subscribe subscribe ... .
@SCALE_SLOTCARS8 ай бұрын
Thank you for watching and commenting. I am really enjoying my return to slotcars 🤗...Harry
@davetherave8368 ай бұрын
Nice work Harry,cut the music out though, hard to hear what your saying.
@SCALE_SLOTCARS8 ай бұрын
Hey Dave thanks for watching .I'm Irish so you probably wouldn't understand me even with no music 🤣 Greetings from latvia..ile think about the music but the band won't be happy 🫢