Repair DAMAGED Cardboard Compacting Auger drive shaft | Machining & Welding

In this video we are repairing a damaged auger drive shaft off a cardboard compacting machine. The shaft on the auger drive has been badly damaged from the bearing locking up. To repair this we need to set that part up in our lathe and machine out the damaged shaft material to prep for welding. We then set up the shaft on our rotator and weld with ER70S-6 mild steel MIG wire. The auger drive shaft is then back in the lathe to finish machining the weld down to spec.
In this video we are using:
- TM-26120G Centre Lathe
- WIA 500i Weldmatic welder
Join our channel:
We upload new videos every Friday at 5pm AEST! If you want to see more of our videos click LIKE & SUBSCRIBE! You can subscribe to our channel here: bit.ly/ceesubscribe
Join our Patreon community: / cuttingedgeengineering
To see more follow us on online here:
Instagram / cutting_edge_engineering
Facebook / cuttingedgeengineering...
Official CEE Merch shop: www.ceeshop.com.au
Check out our AMAZON store and explore our favourite finds that we use in the workshop:
www.amazon.com/shop/cuttinged...
About Us:
Our channel is all about showing you real life machining work from our workshop on the Gold Coast Australia. We specialize in manual machining, hydraulic repairs and heavy fabrication for the earth moving, mining and civil construction industries. So if you're a machinist that wants to see some big gear in action be sure to subscribe to our channel right now. We upload new videos every week that show lathe machining, milling, welding and all the good stuff that comes from a machining workshop. If that sounds like something that you would enjoy seeing, then make sure to join us by subscribing!
Music: www.epidemicsound.com/referra...
Song: Unbroken Spirit by Sunfish Grove
#australianmachinist #machineshop #machinist

[@CuttingEdgeEngineering]

Hey viewers thanks for watching todays video from our machining shop! It's been a while since we got out the 12mm button insert 😂 What did you think of the before and after on this job? 😎👍 Subscribe and hit the bell icon to turn on notifications so you don't miss our weekly uploads. 👇 🤳 Follow us online here: Instagram instagram.com/cutting_edge_engineering Facebook facebook.com/cuttingedgeengineeringaustralia/ Official CEE Merch shop: www.ceeshop.com.au

[@motorcycleandtoolrehab1834]

Another great repair!! makes sense to weld up instead of replacing the shaft section if machine is just going to be used for a few months, I'm sure it will last along time anyway. When is the Shaper going to be moved into the shop? Looking forward to that one. I've got a 26" Shaper which I bought of a Engineering shop in Rockhampton QLD that closed down around 3yrs back. It come with some heavy duty tooling for internal keyways etc which I will never use. I could send them down to you if you wanted them as I would never use them doing Motorcycle repair. I live up at Gympie which isn't to far away.

[@michaelsawley6569]

Friday wouldn't be the same without you guy's, thanks for week

[@marceloa715]

Já sigo vocês,achei boa a intenção de vcs não aceitarem contribuições para o canal.penso que trabalhão com o coração!

[@james.d.8044]

A work of Art !!!

[@christopher20k]

The stuff that you do is grate

[@vudeulash7645]

your "no Warranty repair" is better than most "Warrantied" repairs I have ever scene

[@CuttingEdgeEngineering]

🤣 thanks mate!

[@vincenttrigg4521]

Well it's Kurtis, of course it's gonna be amazing work haha

[@mashrien]

Glad someone seen the scene

[@itsyoboyskinnypenis7898]

Facts.

[@randyharris6527]

Spot on. 👍

[@jacobszymczak9323]

"Nothing is more Permanent then a Temporary solution that Works" I'm betting this shaft will be in use for a long time. Fantastic job

[@masheroz]

I wonder if it's still there...

[@bigeggsr2336]

The machine was pulled out in July this year and was still running with no issues after the repair had been done.

[@anton41]

@@bigeggsr2336cool, thanks mate!

[@yachtsteve]

How many times have you done a temporary fix, and then gone back there 6 months later and alter the rest of parts whatever they happen to be to be the same as your temporary repair😅

[@francisschweitzer8431]

It’s so good to see a young guy with his own shop ... doing REAL WORK .... with REAL VALUES! Even though it’s a No Warranty repair you still went above and beyond.

[@spangy8405]

bang on ... you hit that nail on the head .... Kurtis AND Karen give me hope for the future of mankind ... please have children K&K, keep that DNA line going.

[@MichaelKingsfordGray]

@@spangy8405 Whereas anonymous cowards like you should never be allowed into the gene pool. Not even at the shallow end.

[@horsepants5848]

Your camera work and editing is exceptional Karen! I love the hand held shots where you slowly walk into the scene, that really gives the viewer a strong sense of actually being there. Sometimes I feel like I should be handing Kurtis a caliper or patting Homeless.

[@CuttingEdgeEngineering]

Thanks very much! Really great to know it's being enjoyed 😄

[@maidenlord6663]

Oh by the way Karen you do great camera work I'm glad you talked him into filming these

[@CuttingEdgeEngineering]

Thank you!

[@Watchyn_Yarwood]

Fantastic work with the camera and editing!! I suppose you do the editing as well?

[@whatyoudo9773]

I love the way she follows the machinery like the wire feeding through the rollers, takes me back to childhood learning exactly how it all functions.

[@Watchyn_Yarwood]

@@whatyoudo9773 👍

[@spangy8405]

not to mention the superb music selections ... Karen is a natural at creating an award winning video doc. This lady is as talented as Kurtis ... what an awesome couple.

[@Rightwinger1982]

When I see a new CEE video come, I stop and make a cup of coffee and watch from beginning to end, in full screen! No skipping ahead!

[@CuttingEdgeEngineering]

Thank you mate! That's a heck of a compliment in the world of KZbin

[@terrycannon570]

@@CuttingEdgeEngineering I also watch non stop. It is 3:20 AM here and way past my bed time but don't dare stop watching until the end.

[@andrewpowell6457]

@@CuttingEdgeEngineering same here watch all new episodes right to the end.

[@markfryer9880]

Skipping ahead on a CEE video? Do people really do such things? Is that even allowed? What a strange concept!

[@jw4620]

These videos are the one time I know it will end well.

[@GlennTillema]

Until I watched this channel I always thought welding was for joining metal together, I had no idea you could add material to where it was lost! Now I watch your videos and try to guess what you're going to do to fix whatever was brought to you. Thank you for sharing your work!

[@CuttingEdgeEngineering]

Hey Glenn thanks for taking time to watch mate glad you're gaining some insight from the vids. Cheers

[@obviousness8113]

@Glenn Tillema I do the same thing! I feel like those aquarium fish in Finding Nemo while they watch the dentist 🤣

[@b0rd3n]

Wow! That''s really nice to hear something like that! I truly envy you and the more than overwehlming moment you had when you figured it out! Thanks for sharing this man, really! You help me keep some faith in humans after all! Welding is great and so is machining! Enjoy yourself and every new discoveries you make!

[@GlennTillema]

@@obviousness8113 Yup! kzbin.info/www/bejne/m3vZmaKPe7hjeNU

[@ryantemple4139]

I look forward to these weekly videos more than any other channel on KZbin. I also like that you guys aren’t flooding the channel with videos everyday and instead just producing quality content.

[@scottmclennan6114]

Jesus that bearing must have been howling when you see how much it gouged out.

[@hdezn26]

I bet the operator had to wear earplugs to run that machine before they decided to fix it?

[@MatthewTinker-au-pont-blanc]

@@hdezn26 Prolly all the time anyway!

[@PhilG999]

From my time in the bearing business that was the first thing I thought of! Just never understood how customers would run a machine to total failure instead of having it fixed sooner (and cheaper)...

[@timothyball3144]

"I came in today and it was howling. It must have been nightshift."

[@bogdan_n]

I think this was way past the howling phase...

[@johnoconnor4941]

Thanks to all three of you, Homeless for looking viciously cute, Karen for her excellent camera work and, of course Kurtis, for his frustrating expertise, including all the swear words. Real work, real life, real good. Thanks

[@CuttingEdgeEngineering]

Great comment mate you captured exactly what we wanted the channel to be about. Cheers! 😎👍

[@vincenttrigg4521]

Homeless? Is that the dog's name? Just I know Karen is Kurtis's partner. Sometimes I just don't pick up on things unfortunately lol

[@HappilyHomicidalHooligan]

@@vincenttrigg4521 Yes, Homeless is the name of the Safety Compliance Arfacer...

[@Dimythios]

We both know that shaft bearing has never been changed. What you did was a very nice job and if taken care of that repair will last.

[@davidbaleta5370]

I would give that kind of skill and workmanship a lifetime warranty. Excellent.

[@joelhenderson5404]

Kurtis your wife has the sweetest voice and laugh so sweet.

[@Splits-man]

Quite a “looker” too! 😉

[@upinarms5752]

cringe

[@deplorablelibertarian]

Maybe keep stuff like that to yourself….l dunno, that’s just me.

[@Watchyn_Yarwood]

@@deplorablelibertarian 👍

[@antiussentiment]

You two are actually adorable. I'm pretty sure most couples would not be able to work together the way you do. Power to you both.

[@jonka1]

At the start your safety officer is clearly very concerned that this job is too far gone to be repairable. Then right at the end the look of wonder and respect on his face is a picture. His sigh of relief is perfect.

[@CuttingEdgeEngineering]

😂 he's very committed to his job!

[@vincenttrigg4521]

I am either missing a joke or I'm living in another universe cause I'm not seeing a safety officer lol

[@jonka1]

@@vincenttrigg4521 It's the dog. He's been known as the safety officer for some time now.

[@ronwilken5219]

@@vincenttrigg4521 Newby? Must be.

[@vincenttrigg4521]

@@jonka1 that's what I was thinking a while after I posted my comment but I could have been wrong so I thought it would be better off waiting on the answer. Thank you :)

[@ariedekker7350]

First thanks for making the video and showing it to me. Fortunately this was only a short, not too thick shaft. I once did a similar repair on a very large thick axle. Same problem, bearing stuck. I also welded this axle. I only did that welding on a lathe. Reason: I didn't want to stop welding and attached the welding torch to the support. Gives a much more regular weld. The reason the bearing got stuck was because the fit of the outer ring was too tight. I made sure that the outer ring had a loose fit and put pressure on the outer ring with a cup spring. The machine has never given a problem again.

[@Dave_9547]

It brings back great memories of cranking handles, watching chips roll off the cutting tool. Manual machines are so much more satisfying to operate than just pushing buttons and looking through a shield because you can feel the machine working with your hands.

[@obfuscated3090]

Manual repair machining rules for repair machining since it's faster to make the cuts then code to make the same, generally few, cuts with a CNC.

[@johnmcclain3887]

I retired out of machine work after installing several CNC machines, doing the moving, electrical and electronic connections and just enough "watching time" to know they were properly installed. I had no desire to continue on without the manual machines.

[@Holli622]

When a "no warranty" job comes out good as new, you are so humble Kurtis!

[@terrystark2433]

Impressed with the steady hand accomplishing the welding on the rotator, Kurtis. Karen, great videography, as we are all accustomed to👍 Who's a good boy Homeless🧸

[@gregk.6723]

Should be in horizontal and not vertical position while welding.

[@muchopomposo.6394]

I'm not from an engineering background, so these vid's are fascinating. Curtis is cool, Homeless is class and the camera operator/director/editor does a great, if not anonymous job. Bravo! 👏

[@SilverbackE12B]

Master class work. I’ve been binge watching the channel ever since I discovered it. Your work with a lathe is just simply impressive. I’m a millwright in the states (precision industrial mechanic) and by god this is the best channel I’ve seen in a long time that truly puts great effort into a quality repair.

[@llloyd4]

"Machine is going to be replaced in a few months... " , I am * almost * willing to bet dollars (US) to donuts that you'll get this exact same auger drive shaft back in a few years when the bearings fail again. :D

[@CuttingEdgeEngineering]

😂 seems to be what most viewers are thinking. Thanks for watching

[@kenp3L]

Have you priced donuts lately?

[@94XJ]

That or it'll be sold off as refurbished

[@mashrien]

People that say this shit are 99% just trying to save face and not have to admit "we're broke AF and are barely staying afloat, I/we can't afford the extra $xxx for a proper repair" and are going to be using that machine for years to come. They'll probably even take it to a *different* machine shop next time, again, to save face and not be recognized lol Edit: I speak from experience. I've had to have stuff repaired and not been able to get a _proper_ job done, just " _good enough_ " to get me by a while, because I was soo damn poor lol

[@keithgutshall9559]

I like donuts!!

[@emdsdownunder]

Got my CEE Australia cap and coffee mug recently Guys!!, thanks for that 👌🇦🇺,………glad to support You in some small way, and You Guys should be proud of everything You have accomplished with CEE,……A Proud Australian business!! 👍👌💪🇦🇺🇦🇺……go well and take care ☺️👍

[@CuttingEdgeEngineering]

Hey mate thanks for the support we seriously appreciate it and glad the merch arrived for you. Enjoy the vid Cheers 😎👍🇦🇺

[@KarateSensei71]

I absolutely love your content. Karen is the best videographer on KZbin, she seems to get into the details for Kurtis' masterful work and shows so much ofteh behind the scenes detail and all of the steps. It is fascinating. Homeless is such a joyful pup, always brightens my day to see him healthy and happy you are great examples of how humans need to be. I hope that "Yeah Buddy" was a shout out to Ronnie Coleman!

[@upstairs202]

I’ve never been this close to my lathe work and not have any hot ones down my shirt, in my ear or stuck to my nose. Enjoyed everything about this. Nice shop, tools, abilities, work ethic, videography, editing, sense of humor, but most of all the outtakes. Until I saw them, I thought this was the smoothest operation on the planet and now that I think of it-it is! Awesome work, both of you!

[@ray6652]

Hi Kurtis. I love watching your videos, As I like engineering. I would like to say I think your one of the best engineer I have seen on youtube. Because you explain everything you are doing, or the process you are going to do with anything that comes through your door.Just brilliant.

[@CuttingEdgeEngineering]

Hey mate thanks for watching and this comment is awesome we appreciate it!

[@tda2806]

Customer states, I am going to switch the machine out soon, so don't do a full rebuild, 12 months later, following Kurtis's repair, why would I swap it out it's working fine.😂🤣😂

[@hdezn26]

With a nice rebuild like that , they probally would keep the machine many more years.

[@steveb6103]

I've heard it before and it's more like 5 years later! These augers can really pack cardboard ! 2 to 1 over a standard compactor. They blow apart a normal rolloff box. That's what I work on,

[@billy19461]

Yea and 5 years later he wants a new one because your repair failed.

[@moehoward01]

@@billy19461 And he'll want CEE to pay for it.

[@TheEvertw]

I bet that is exactly what is going to happen.

[@terryfromsouthcarolina4601]

Curtis, once again you have done what my dad always said. You made a silk purse out of a sow's ear. Bang up job! Right proper finish too. Always a joy to watch someone else work.......and wish I was still doing it. Cheers! Terry from South Carolina USA

[@phillipcave1197]

Hey Kurtis, I've been waiting once again for your video. I look forward to them every week.

[@CuttingEdgeEngineering]

Hey mate! Thanks for waiting we've got some bonus vids in the works to make the weeks go faster coming up 😎👊💥

[@ibTeeMac]

@@CuttingEdgeEngineering More late nights for me here on Vancouver island, Canada as I can't wait till morning but always worth it.

[@christhomas2825]

Been welding since 1998 and I worked in a machine shop for 8 years. I've done so much build up like this. I've never seen it done in this position. We were always able to turn the shaft into the horizontal position. Pretty cool to watch.

[@josecondemarin9586]

Kurt you have save your customer a lot of money doing this repair shame on them for not doing the proper maintenance the repair is better than getting a new part and no warranty as it should be the damage was so severe. But you came to the rescue. Love the video, I can't wait for the video every Friday here in the states. Thanks take care.

[@CuttingEdgeEngineering]

Hey mate thanks for watching and supporting the channel we really appreciate it. Cheers!

[@MacGyver-1]

Best part of Friday morning is Cutting Edge and a fresh ground cup of coffee

[@CuttingEdgeEngineering]

Awesome mate enjoy and have a good day 😎👍

[@terrycannon570]

Homeless always makes me smile. I lost both my little Terroirs in the last 6 months to Coyotes . I sure do miss both of them. Homeless is such a beautiful dog.

[@vincenttrigg4521]

I'm sorry for your loss and wish you well

[@CuttingEdgeEngineering]

shit mate sorry to hear that! Glad our big boof head can bring a smile

[@dennisc3238]

What I really like about all your vids is that, not only doing such fine work, but that you have a bit of fun along the way. Throw in shots of Homeless's antics along with the outtakes, and voila, fascinating and entertaining all in one.

[@waymamma]

Awesome work building up that shaft with the MIG - no inclusions just pure new metal. Love it!

[@wuggacrt]

'' I don't want to spend any money on it'' says every Owner ever.

[@CuttingEdgeEngineering]

🤣☝️ accurate

[@slidey1788]

Sounds about right. One of my tasks today at work was repairing a cylinder base eye, without doing a reseal of the cylinder. Weld up with the spear extended to avoid melting the piston seal. Then into the mill for a bore. Just another day at the office.

[@justdoit4170]

Found this channel about a week ago, then thought to watch a video I have not seen before. And lo and behold this one pops up just as I finished, must be my lucky day. :-) Great channel, excellent skills, wonderful editing and the safety inspector is the cream on the cake.

[@CuttingEdgeEngineering]

Welcome to the channel mate thanks for watching!

[@vincenttrigg4521]

I highly recommend watching more of the videos! If you liked this one then you'll love the others as well!!

[@andrewsmith6406]

You're in for a treat mate.

[@justdoit4170]

@@vincenttrigg4521 You're right. The last time I found a channel I really enjoyed I binge watched every episode which took over a week, and now I have to wait for the next episode and it drives me crazy waiting. Have learned my lesson this time, to take it easy, and watch one or two when it takes my fancy. :-)

[@justdoit4170]

@@andrewsmith6406 More than a treat mate, I get a lot of value from this channel. :-)

[@TomokosEnterprize]

Good day. I have always found that most folks that can weld well are not comfortable in the machine shop and vice/versa. Those that can do both well like you and I are rare beasts for sure. It's great to sit here through the process and the outtakes at the end always break me up. Thanks a bunch and have beauty days to come eh.

[@CuttingEdgeEngineering]

Hey Dean hope you're having a good week mate. Thanks for always watching and commenting! Cheers, Kurtis

[@TomokosEnterprize]

@@CuttingEdgeEngineering When I retired I lost access to he equipment but not the memories of the one-off repairs I would get. I tried a factory type job and by the end of the first week I was out of there like I was shot out the barrel of a 12 ga, LOL. In my work at the logging shop I never knew from day to day was coming at me. I never really knew what a great place it was. Oh well I have you to help fill that void for me. Great videos mate ! ! !

[@barryhunt5357]

Your No Warranty is better than any shops I've encountered in the southern U.S. , I'm sure the owner was thrilled with your repair , like I always say , there are machinist / fabricators , and there's Kurtis at Cutting Edge , Your the Man !!!!!!!!!!!!

[@CuttingEdgeEngineering]

Hey Barry thank you mate appreciate it

[@AngusOg69]

Morning from sunny Glasgow Scotland and strangely it is sunny.

[@CuttingEdgeEngineering]

Have a great Friday over there mate

[@Splits-man]

It just doesn’t get any better than this does it boys? A Cutting Edge Engineering video to end the week! 👍

[@Watchyn_Yarwood]

There is, however, one BIG problem with CEE videos. We only get one per week!!

[@Splits-man]

@@Watchyn_Yarwood Agreed!

[@bobgleaser7106]

Excellent camera work, I cannot think how it could get any better. Getting right in there, I get closer to the screen to watch.

[@williamkerr3350]

Pride in your work and a settled attitude, you're a bloody good operator mate,a pleasure to watch,thanks

[@aquilaaudax6033]

sittin' back watching "Rocky Mountain Race Week" vids, CEE pops up, Pause, Switch, Luvin it, CEE, showin' us all how, the true Aussie Way, Always something different in the shop, Kurtis (Head Machinist), Giggler (Karen, all rounder), Homeless (Safety Officer)

[@CuttingEdgeEngineering]

Hey mate! Thanks for taking the time to watch the video seriously appreciate that support. 😎👍

[@matthewmccormick2417]

Always glad to see the STAR of the show "The Pup" is happy. You the Wife and the Pup are always a good show. Thank you for another great Video. Stay safe God bless.

[@CuttingEdgeEngineering]

Hey mate thanks for taking time to watch and comment

[@sayfuddinjauffurally]

it's a pleasure watching you doing your things...thanks for all your videos mate...

[@uglysteve1]

It appears that you do better “quickie” repairs than a lot of the permanent repairs we see.

[@kentuckytrapper780]

Looks like you saved the day, that was bad, I've built up a few bearing surfaces but that was a save for sure. Great job.

[@CuttingEdgeEngineering]

Hey mate respect and thanks for watching 😎👊💥

[@user-tw9io9nz2m]

“Coming soon, Kurtis is getting a quick change tool post” I hope that’s not a joke, I’d be pretty excited to see which one you’d pick

[@CuttingEdgeEngineering]

It's not a joke 😏

[@andrewsmith6406]

Not gonna happen .

[@markfryer9880]

@@CuttingEdgeEngineeringWTF????? Say what now????? Karen is Kurtis feeling all right?

[@randytravis3998]

@@CuttingEdgeEngineering you might get one but the big question is well you use the quick change post ,, or will it become a costly paper weight ,,,

[@Azlehria]

@@CuttingEdgeEngineering But the real question is what kind: dovetail? Multifix?

[@tedmich]

It can be a stress for a couple to work so closely together, but you two do a great job. As skilled as Kurtis's on camera machine work is, Karen's behind the scenes camera work, editing and scene composition is equally impressive, brava! I do worry about the dog being around so much chips! The metal ones, the other kind he can obviously handle...

[@jakemoeller7850]

I love watching your videos! As an artist, I appreciate the detailed work and the time expended. 👍🏻👍🏻👍🏻

[@ibTeeMac]

Fantabulous video as usual. Tough work being a safety inspector oh and love the little dig about the cling wrap at the end. Well played Karen...

[@CuttingEdgeEngineering]

🤣 cling wrap is the devil! Thanks for watching mate glad you enjoyed it

[@Ham68229]

Have to say but, that was definitely one of those pure neglected type machines. I'll take you're "no warranty" work over many other's so called professional work. Just a pure pleasure to watch and see your quality of work. Awesome work as always, great video. Cheers :)

[@CuttingEdgeEngineering]

Thanks for watching mate

[@derkaderka5910]

Brilliant job on the cling wrap! The repair was pretty cool too.. Enjoy that beer Carl, you earned it!

[@Bear-yh6cv]

Loving the camera and editing skills Karen, those slow motion shots are pretty cool. Those are some bonza welding and turning skills too, quite the skilful couple are you 😂❤

[@tonyquark493]

The Master at work. Just love watching the level of competence and dedication.

[@maxnex7676]

First question to mind on the start of the video was why not spray weld, answered in first minutes, second question that came to mind, where did the measurements/specification come from, answered a few minutes later. Thanks guys, Friday started off well.

[@bagerandtager]

No arrows pointing to the damage this time 🤣

[@CuttingEdgeEngineering]

Wish they did it would have definitely helped 😂

[@bagerandtager]

@@CuttingEdgeEngineering 😂

[@ernestmathews4674]

Your film and edit work is a pleasure to watch, and being taught good careful practices and problem solving is frosting on the cake. Please continue.

[@ulrichminky9495]

That close up welding footage was brilliantly filmed. Great job.

[@Gnaus76]

Amazing that you don’t have any “air” bubbles in that weld 👍

[@amandugamage4642]

Thank you for the vid mate! really appreciate the quality of your work and the camera work of the lady.

[@CuttingEdgeEngineering]

Thanks for watching glad you enjoyed it 😎👊💥

[@DaleDirt]

I had to come back and see this again , this will encourage for a project coming up . Great shots and narration . Your skill level is much appreciated by all , especially the ones you have saved there machines and put them back to work .

[@leongarofalo1821]

Just gotta say I love the outtakes...typical soft spoken machinist! I've watched every video to date and yall got a fan for life for sure! Love the quality of your work! Could watch this for days on end!

[@CuttingEdgeEngineering]

Hey Leon thanks for watching mate glad you're enjoying the vids

[@markgriffin4888]

If you had used the micrometer as aa G clamp , you would have been spot-on 😆😆😆😆😆😆

[@morriewyatt6234]

Yep, precision G clamps.

[@blastingweevil2968]

perfect repair cant even tell it was repaired as we have come to expect with your work so much care and attention to detail !!!

[@JohnH20111]

and i would bet Dollars to Pesos that the part that was repaired will outlast the machine that it’s installed on, due to the high quality of the machine work that was done

[@mehshovely]

Exceeding expectations per usual. Excellent work CEEA!

[@djhaloeight]

Outstanding work as usual!

[@Dsp.Studios]

Spot on! I really hope you guys expand your business world'wide, this way, maybe I'll get to work for you guys on similar large-scale projects 👌

[@samspade4634]

Regardless of what you are fixing, it is always great to watch a master at his craft. I love the videos and the engineering talent you have is second to none. Thanks for sharing. Very entertaining.

[@CuttingEdgeEngineering]

Hey mate thanks for watching and commenting. Cheers!

[@dangoodine5676]

Another quality repair! Keep up the good work Kurtis!!

[@tomoakhill8825]

Just to be clear, the _only_ reason I watch these is to see Homeless. What a wonderful dog. He has such a great smile. I love the way he walks, happiness in motion. Homey makes the best dog noises I have ever heard. Lovely snorts, grunts, and gurgles. (The truth is, watching genius in action, Kurtis doing his work, is the highest joy. Homeless is simply the icing on the cake.)

[@fulgwar]

I think this is the first video I've ever seen you indicate when you mounted the part. I thought you might have some special Aussie magic or a calibrated eye. :D love the vids!

[@CuttingEdgeEngineering]

Hey mate hahaa we've shown a few snippets in older videos just prefer not too, boring AF and plenty of other channels make up for it 🤣👍

[@AndyMcBlane]

Great end to my week every week is getting home from work and watching these. Great video as always mate.

[@CuttingEdgeEngineering]

Nice one glad you enjoyed it and have a good weekend mate

[@Littlestrawberryfox]

You are like an actual machining God with your skills and tools, i have seen bad welders, really really bad welders and good welders but you are by a FAR FAR margin past them, your work is sublime it just leaves me in awe what you can do as so much that you do such as in this video building up material, that other welders say you can't do that for so many reasons but that just shows even more your amazing skills to prove them wrong. I also LOVE your work ethic and we seems to share the desire to not only make the job required perfect but its appearance as well, like in the video for the dual hydraulic pistons where you had to wait so long for materials and just the housing didn't appear strait so you lathed it down to also look perfect, I loved that, and love that you follow the rule of you would not be happy if you received back parts that looked bad even if they worked right so you would never let it leave your shop I just adore that ethic. You both are amazing and I am so glad to see someone making such amazing content by their actual job, and as awesome as your machining skills are your wifes ( i'm so sorry i forgot your name :( ) your camera work and editing is top notch as well love from canada

[@chuckmadere]

I really enjoy watching your videos. You have so much pride in your work and it comes across every time. I am believing that your wife does the camera work. Big shout out to her for doing a great job. Thanks for sharing your videos with us all.

[@theolathrop8343]

Always look forward to your videos! Homeless is so adorable

[@CuttingEdgeEngineering]

He was being a big sook, cold winter day kept him inside haha

[@aspees]

Super impressed that there were no bad spots in all of that weld. Congrats on another successful project. Skip the welding screen and show more of your dog during those long welds. Cheers

[@CuttingEdgeEngineering]

Thanks for watching mate

[@russbentley7677]

Very nice feeling in the intro with Homey and the acoustic guitar and machinery set up.

[@davidtooley420]

That quick change tool post will be great to see in action! Thanks for another awesome video 🙏🏾

[@metubewot]

Great welding /machining. Pro grade filming/editing. Loved it. Regards to Homeless.

[@CuttingEdgeEngineering]

Thanks Ian glad the videos and work are being enjoyed 😎👍

[@peterparsons3297]

nice welds, i have done that sort of thing many years back, we didn't have mig in those days and nothing worse than finding a bit of slag or porosity where it hadn't been welded right

[@guygriesmann1234]

Great work. It is amazing how you bring these damaged pieces back to use.

[@shaunharrison1693]

You are one hell of a machinist! Your work speaks for its self.

[@JohnH20111]

absolutely !! and word of mouth about the high quality of his work is just about the best way to advertise and promote his shop, and also bring in more customers

[@outbackladas]

Nice job, well done 👍. I used to do the same sort of thing on stub shafts etc many years ago, however I didn’t have the advantage of a mig in those days. It was mostly stick welded, that made a long drawn out process of it, fortunately things have progressed since then.

[@CuttingEdgeEngineering]

Good one mate! Yeah mig has come a long way the past decade. Thanks for watching 😎👍

[@Jcreek201]

Your vids always get posted at midnight my time.. Luckily, it's the one day a week I work graveyard. Always makes my Fridays go by so much faster!

[@CuttingEdgeEngineering]

We do it for you 😉😂

[@hdezn26]

At least the day shifters are asleep by then. At least I can watch videos in peace. Till, I see daylight again and think, Oh crap I stayed up waaayy to late again...

[@andrewsmith6406]

They show up about the perfect time for me in West Aus, finish work, couple of pints at the pub with work then home to watch Campbell work his magic.

[@stevenjones2852]

Curtis I don’t know where you learnt your Trade but to have those Turning and welding skills is pretty Unique. I am a Plater/Welder by trade in the UK, but have spent the last twenty years working for a commercial aircraft manufacturer because you go where the money is. I have not really welded at all in that time. Those days doing my apprenticeship were some of the most rewarding. Watching a project from start to finish and being involved with the installation. Building aircraft requires a different set of skills but you rarely folllow the product to the finally assembly line. I did mainly Mig and Stick back in the day for welding structural sections. I think I fancy doing more Tig welding and I think that’s where I going to concentrate my efforts, welding more stainless, Alu and exotic metals. More refined projects. Keep up the really good work mate. Always good to see proper skills in the real world.👍

[@glennp9904]

Love your work. Who would have thought that watching something going around would be so interesting. A special thanks to your fantastic camera person too.

[@davidallinson2501]

Very good job. I do some turning and I can see you managed an excellent finish. The packing machine running with the busted bearing grinding into the shaft must have been truly painful to witness.

[@dieterhinders9237]

Hello Kurtis, this was really a lot of welding. Well done. Like others I think that you will see it again in your shop after a couple of years.

[@mrpesky163]

If God could put the world on a welding table, Kurtis could make it right again 😉 Thank you for the videos!😁👍

[@michaeltuckerman6983]

I would watch a whole video on just that cute little dog

[@chrissandles4833]

Always keeping me entertained on the night shift here in the states. Keep up the great content! Also that pooch NEEDS a girlfriend.

[@CuttingEdgeEngineering]

Awesome glad you can watch and enjoy. Haha he's had a girlfriend and ended up making 8 pups 😂👍😏

[@chrissandles4833]

@@CuttingEdgeEngineering now that’s funny. Probably denying the whole incident.

[@karlhrdylicka]

@@CuttingEdgeEngineering That's what you get with one like a ripper shank.

[@rclc93]

@@karlhrdylicka LOL

[@xmachine7003]

@@karlhrdylicka 😂😂😂rippa

[@keithmatthews1673]

For a 'cheap' repair that was impressive and cleaned up pretty well! Great camera work on this one too. Hope Homie is OK - he did not seem his usual ebullient self.

[@CuttingEdgeEngineering]

Hey mate thanks for the great comment! Yeah he was alright just being a sooky it's winter and a bit colder than normal 🤣

[@jacevedo770]

Sir you and the Mrs are masters at your crafts! Thank you posting another great video!

[@jrondyer1049]

As always a pleasure to watch a craftsman at work. I would also like to put out a complement in regards to the video work, the camera work is really getting better and better with each program. I want to thank the both of you for your effort and time, most of your viewers don’t really appreciate the time that is required to produce these segments.

[@pollepost]

You really have some skills. Have a nice weekend, Karl and Karol :D

[@CuttingEdgeEngineering]

🤣🤣🤣

[@hdezn26]

Dang, they tore that up real good...

[@gregparks307]

So nice to see a man who truly is a craftsman!

[@anointed852003]

The shop i work for does alot of work like this on shafts for flaking and cracking rolls. In almost ten years I recall only one instance of a shaft breaking after welding. Great work!