Repair DAMAGED Hydraulic Cylinder for CAT 651 Scraper | Part 2

This video is Part 2 of repairing a damaged hydraulic cylinder for a Caterpillar 651 Scraper wheel tractor. This is the Apron lift cylinder on the machine and has been damaged by something causing massive amounts of scratching inside the barrel and on the piston. In this part 2 video we continue on with the new barrel and heat up with a flame torch before interference fitting the head flange. We then metal core weld the head flange on to the new barrel before finish honing the internal diameter using our Delapena vertical honing machine. The new barrel is completed with fitting and welding on the barrel end. We also repair the hydraulic cylinder piston by machining down the scratches using our lathe.
Missed Part 1? Watch it here: • Repair DAMAGED Hydraul...
Join our channel:
We upload new videos every Friday at 5pm AEST! If you want to see more of our videos click LIKE & SUBSCRIBE! You can subscribe to our channel here: bit.ly/ceesubs...
Join our Patreon community: / cuttingedgeengineering
To see more follow us on online here:
Instagram / cutting_edge_engineering
Facebook / cuttingedgeengineering...
Official CEE Merch shop: www.ceeshop.co...
Check out our AMAZON store and explore our favourite finds that we use in the workshop:
www.amazon.com...
About Us:
Our channel is all about showing you real life machining work from our workshop on the Gold Coast Australia. We specialize in manual machining, hydraulic repairs and heavy fabrication for the earth moving, mining and civil construction industries. So if you're a machinist that wants to see some big gear in action be sure to subscribe to our channel right now. We upload new videos every week that show lathe machining, milling, welding and all the good stuff that comes from a machining workshop. If that sounds like something that you would enjoy seeing, then make sure to join us by subscribing!
Music: www.epidemicso...
#australianmachinist #machineshop #machinist

[@CuttingEdgeEngineering]

Hey viewers thanks for watching the part 2 video of the damaged 651 apron cylinder! Always great to see another job go out the door. For anyone wondering why we didn't paint it in the end, this customer has their own assembly & paint team 😎👍 p.s. the safety officer is still in good health after eating a crumb of Tim Tam 🐾 Subscribe and hit the bell icon to turn on notifications so you don't miss our weekly uploads. 👇 🤳 Follow us online here: Instagram instagram.com/cutting_edge_engineering Facebook facebook.com/cuttingedgeengineeringaustralia/ Official CEE Merch shop: www.ceeshop.com.au

[@Kabel717]

Yummy yummy, Tim Tams. Or daughter got us hooked on Tim Tams a couple years ago and they are fantastic.

[@daviT_con_T]

Please, its not my Dog, but i like him like if he were, do not give any chocolate at all, this could create a heart instant issue believe it or not. I know is please him but he is a dog, and we need to be responsable for him. Thank u a lot.

[@Thedevontree]

What if it rusted on it way over

[@jonproudfoot8639]

I weld metal core on pressure piping like how you do on these cylinders, and the way we do it we roll the pipe away from ourselves and as long as your settings are right (high wire feed like how u have it) the weld is just as strong but the profile of the weld is very smooth, not so peaked, and there's less spatter. You should give that a go on a piece of scrap and see how you like it

[@mydeardaughterfiona923]

Hello, do not be bored, I have a question. Why did they make a few holes in the top of the jack instead of a valve ????

[@rayhathaway7831]

Great job again Kurtis, I've been retired for 5 years after 50 years of machining and still watch and enjoy your videos it just gets in your blood, how sad am I. The smell of that honing oil still comes back to me every time I see your machine.

[@CuttingEdgeEngineering]

Hey Ray thanks for watching mate! Glad you enjoy it and brings back some great memories. Have a good one 😎👍

[@markfryer9880]

It will be doing your brain good to watch these videos as you will be thinking your way through the process and keeping those neurons alive. Keep your brain sharp and have a great retirement.

[@shaenj]

Mate, if you hadn't led the way we wouldn't know it now. Thanks cobber.

[@ezrhino1803]

Just amazed at the pro job you do in bringing something that damaged back to life. What I would also like to compliment is the tremendous job done in the video and editing departments without which none of us would know how good a job you do. Hats off to the videographer as well as the safety officer in these videos. Thank you for allowing us to catch a glimpse of your world.

[@CuttingEdgeEngineering]

Hey mate this is one awesome comment! We both enjoyed reading this, thanks for taking time to support the channel. Cheers 😎👍

[@onesimpleclik]

The safety inspector is definitely the star of the show :D

[@CuttingEdgeEngineering]

Oh yeah he brings all the talent and good looks hahaaa

[@____________6145]

@@CuttingEdgeEngineering and Carl (A.k.a Curtis xD) does the work xD

[@djamelhamdia134]

He always is.

[@ckm-mkc]

@@CuttingEdgeEngineering Don't feed him chocolate, it's toxic for dogs. vcahospitals.com/know-your-pet/chocolate-poisoning-in-dogs I hate to be that guy, but having paid thousands in vet bills and loving my dog(s), I really don't want anything to happen to him.... Also grapes/raisins are even more toxic.

[@eddierodriguez419]

Yeah he is HES THE STAR 🌟 ALRIGHT 🥰

[@karlos9368]

I come here for..1 , the safety operator. 2 , the out takes at the end. 3 , the engineering bit in the middle. Good episode !

[@Majiksmoke]

Color me shocked! After 43 years I've finally seen it all...it IS possible to have a well trained safety inspector! Top work from NOT CARL and the missus! I'm just stunned at the duty cycle of that welder.

[@CuttingEdgeEngineering]

hahaaa yeah he's a the best safety officer, easily bribed 🤣 The duty cycle on the welder is 60% at 500amps and 100% at 400amps

[@alexjohnward]

WIA made great welders.

[@dannmohr5721]

Man that’s a Mother of a Honer……everything is big down their…….really enjoy watching your patience in doing a 100% job very meticulous and precise……scratch to dogs ears…… he’s a hoot to watch opening packages and seems to know which are his……😉😉😉😉😉😉😉😉😉😉😉😉😉👍👍👍👍👍👍👍👍👍👍👍

[@dregenius]

I'm barely above "dangerous shade-tree welder" and I fully and completely sympathize with that feeling you get when you're trying to heat-shrink two parts together... and you get the hot part to go on *just a little* and invariably it suddenly yoinks itself crooked and binds right up.... that overwhelming anxiety, knowing that with every passing millisecond, heat energy is just *yeeting* itself through that point of contact from the hot part to the cold part... that within seconds, every last shred of the precious thermal differential that our human brain worked so hard to create will not only be gone - it will never be achieved again now that the parts are in contact with each other... it's a deep, existential dread, for sure!

[@daleburrell6273]

...it takes PRACTICE-!!!

[@grahamstretch6863]

@@daleburrell6273 Yep, yet there’s always that one like the head collar that Kurtis had in this video and I bet he’s had tons of practice! It still has the exact effect described and that fraction of a second to grab the conveniently placed hammer feels like an eternity!

[@dalethedentist]

Mrs K did a good job on that editing at the end of part 2, left us all wondering if it was jammed😬😬

[@CuttingEdgeEngineering]

Hahaa yeah she knows what to do 🤣

[@TYSuggested]

What a cliffhanger! And then he just taps it in place. Haha.

[@asvarien]

@@benwinter2420 Spoilers dude!!

[@SimonCoates]

I thought Kurtis had burnt his hand thru the glove. FFS I was worried - thought we'd see a big blister, but it was only a little tap 😂

[@grilnam9945]

Nothing better than watching Drunk Carl on the outtakes if you slow it to a quarter or half speed.

[@CuttingEdgeEngineering]

hahahaa shit don't give our viewers ideas 😂😂😂

[@HDGamer2424]

Non-drunk outtakes are already good enough to make me shit myself 😂

[@Laura-wc5xt]

Girl Nam, oh my heavens, that is so funny, I tried it and your right,,,,thanks for the tip....cheeers

[@craigjones9244]

HAAAAA🤣

[@rogerdavies6226]

Camera Girl seems to know just how to get the best shots - I marvel at her talent - She is a true artist. I am guessing she does all the editing also. Again hats off to her

[@ilovbleach]

All right, let's get it going. One of my favorite machining channels.

[@CuttingEdgeEngineering]

Thanks mate! Enjoy the vid 😎👍

[@ralflisell3287]

I really, really love the concept of "heat-shrink fit"!!

[@robertlark7751]

Love the pup. He always looks so happy.

[@CuttingEdgeEngineering]

He's got a good staffy grin

[@rickguerrero2282]

Right when I think that there cannot possibly be another mind blowing machine in your shop……..you show me another mind blowing machine!!! Great work!

[@fredfarnackle5455]

Another masterpiece! I just love that honing machine, it's an engineering marvel in its own right, and worth its weight in gold I'd imagine - Homey obviously agrees, lovely cross-hatch.

[@Rogster559]

One day you’ll get the intro in less than three takes that’ll upset us I love the antics And listening to giggling and homeless , fantastic job love watching you reconstruct or totally rebuild thank you

[@CuttingEdgeEngineering]

i'm working on it 🤣 after 18 months there has been some improvement lol

[@rickyabrahams7100]

Thanks to Mrs K, we have a real front row seat👌

[@CuttingEdgeEngineering]

Thanks for watching! Support like that makes it more worthwile. Cheers

[@OsynovyjKil]

Прекрасно! Взяв і зробив! 1.Висока точність токарного верстату. 2.Глибоке розуміння базування, принципу постійності та суміщення баз. 3.Наявність допоміжних інструментів, спеціальних інструментів. 4.Не застсовував верстати з ЧПК. 5.Не просто верстатник широкого профілю, а металообробник 7-го розряду! 6. Ще раз доведено, що не всі вузли замінюють, але можливо і потрібно ремонтувати! 7.Досвід, який не купується. Удачі в житті! Давно не бачив такої толкової роботи!

[@howder1951]

Nice job Kurtis, I never tire of watching these big cylinder repairs. Thanks and cheers mate!

[@CuttingEdgeEngineering]

Good to hear you enjoy watching them mate. Have a good week 😎👍

[@howder1951]

@@CuttingEdgeEngineering Holey smokes! congratulations on the subs, I didn't realize how many you had until now. I guess you better send a big thanks and congrats to Mrs. K and the staffie pup for their effort as well, cheers and well wishes to you all!

[@rockeerockey6941]

Safety officer & full time international good tidings ambassador! Your outtakes prove you'll be the next "Crocodile Dundee!" Such great script retention Where's your helicopter?

[@rgmoore]

She sure does have Homey trained up true and right. Makes one wonder how your training is coming along Kurtis. Great work and thanks for sharing!

[@CuttingEdgeEngineering]

Kurtis needs a bit more work 🤣

[@mehmethanaydn3113]

heavy machinery doctor I congratulate you I would like to state that I enjoy watching your videos.

[@CuttingEdgeEngineering]

Thank you very much! Glad to hear you enjoy the vids mate

[@jw4620]

If I had ever accomplished a cross hatch like that, I'd have a photo framed on the wall. Holy crap!

[@anthonymurray5216]

Clearly your wife has as much patience as you do for your machining. Love your work.

[@davidforrest399]

I was hooked with the slowmo saftey officer start. it just got better from there!

[@CuttingEdgeEngineering]

haha yeah the missus thought that was a good intro. Thanks for watching

[@stewartfrye]

I don't think most people see the beauty in the steel as I do. We as humans, forget the amount of effort went into the part you just made. The metallurgy, the preciseness of handling and forming steel. I truly marvel the variety of tools that surround this craft. I hope your living your dream, the three of you.

[@BruceBoschek]

It seems you're enjoying those cold ones, Carl. Thanks for once again saving our Friday. Homey is obviously doing well by doing good! Thanks from Germany.

[@genreaper]

Good to see the head welded on hot too. Great job all round. Love the honing machine. That worth its weight in gold. Stay safe.

[@gregwah]

My anxiety from the ending of the last video has finally been relieved!

[@CuttingEdgeEngineering]

Hahaa sorry to keep you hanging mate 😅

[@gregwah]

Should have known better and not second guessed the workmanship

[@joeslater604]

That answered my question about finishing the inside of the cylinder. You have a very well-equipped shop.

[@Stefan_Kawalec]

Your videos could be used in all kinds of trade schools as excellent tutorials for future machinists.

[@CuttingEdgeEngineering]

Wow, thanks! Appreciate it 😎👍

[@gravey07]

Nice to see the old honing machine in use on a job. Thanks for sharing.

[@CuttingEdgeEngineering]

Thanks for watching mate!

[@ObsceneBlue79]

Aaaah emery cloth, the maching world's duct tape.... fix that stratch, smooth the finish, adjust your taper, hone your drilled holes, it does it all. Great videos.

[@CuttingEdgeEngineering]

haha yes very versatile stuff that! Thanks for watching mate 😎👍

[@bradleywilliams2401]

The Safety Inspector in SloMo, Hilarious !! Excellent Machining Once Again Kurtis ! Great Camera Work also. Take Care all B Safe 🇨🇦

[@Carpythesharky]

Your shop always looks so clean, even with all the cutting fluids and chips surely finding a way to try and make things messy. Love these videos.

[@CuttingEdgeEngineering]

Hey mate thanks for watching! Yeah some days it gets to be messy, you should see the top of my tool benches 🤣

[@smitty9733]

Curtis - You may never give "The King's Speech" But you are a great ambassador for the working man of Australia _ Kudos mate !

[@Holli622]

Good to see that the flange did fit after the cliffhanger in part 1! Awesome work! 👍

[@bogdanradulescu870]

It was a time i wanted to start learning machining (i am an aircraft mechanic). When i see what you are doing i realise it is a life time work and time investment to learn all the bits and pieces and the secrets of the job. Your channel has one of the most satisfying technical fixes i have seen. I love it. If i would be looking for a job and a boss i will sure like to have one like you. Keep up the good work...

[@TheKnacklersWorkshop]

Hello Kurtis, Good to see the Delapena vertical honing machine in action… I am not sure why I like that bit of kit, but I do… I liked the black and white transition to colour at the start of the video. As always have a good weekend… Cheers. Paul,,

[@CuttingEdgeEngineering]

Hey Paul thanks for always taking time out to watch and drop a comment we appreciate that a lot! Have a good one mate 😎👍

[@Geceil]

The amount of effort and attention to details to the repair done is admirable

[@mustafakablanuraz2020]

I follow you from Cyprus, good luck

[@CuttingEdgeEngineering]

WOW thanks for watching!

[@mustafakablanuraz2020]

@@CuttingEdgeEngineering I wish you continued success

[@francoisliesenborghs6026]

Hallo Australia , What à fin job you did. No doubt youra professional mechaniker. Every company would have such à guy. Proficiat François ( Belgium / Europe )

[@dashaB-sl4pu]

Happy week end folks, have a good one

[@CuttingEdgeEngineering]

Cheers mate! Same to you 😎👍

[@stuartlockwood9645]

Hi Kurtis and Mrs Kurtis ☺, thanks for another great video, part 2 had a nice selection of operations ,stunning workmanship as usual, and terrific camera work that's up there whith the best on youtube, and this is why I'm glued to your chanel, and not forgetting the security guard , he's very flexible , and doesn't mind rolling about on the floor either, lol. Stay safe you two, best wishe's to all, Stuart uk.

[@CuttingEdgeEngineering]

Hey Stuart! Hope you're having a good weekend mate. Your comments never disappoint we both enjoy reading them and really appreciate support like that! Makes the extra work worthwhile when we know viewers enjoy and appreciate what they are watching. Have a good one mate, cheers Kurtis 😎👍

[@88azturbo]

Love these videos! If I could get a recording of just all the cool shop noises (welding, grinding, the blow torch, all the sounds the lathe and line boring machines make) I could play them as background noise where I work so I feel like I'm actually getting some shit accomplished.

[@CuttingEdgeEngineering]

hahahaaa that's great idea. Nothing better than watching and hearing hard work 😂👍

[@BmwMunze]

Underrated comment... 🤣🤣🤣

[@jimmcintosh2708]

what should have been said Thats another job down and some folk should be happy, as usual Kurtis a marvellous job, great to watch a crafts man at work.

[@hdxer8825]

Kudos to the camerawoman and her detailed videos. I already praised you at the 1st part :) Thank you for sharing your work with us, it's very interesting to watch. Stay healthy

[@CuttingEdgeEngineering]

Cheers mate! We both appreciate this. thanks for watching

[@toneault7499]

once again a big thank you for the close up of the honing. it has brought back memories of days long gone.? i made valve seats an liners from 1.3/4" to 22"DIA. WE HAD TO SHELLACK NEW STONES our selves. from 80 grit to 600.. depend on job. never seen a two stone job with two scrape guides. you do have a great job and thank you for letting us in on the fun.. just wish it was smelly vision.. miss the smell of the engineering oils an vapers . tone uk

[@macmac19800]

Another great job. Although I have nothing to do with machining, I watch your movie with pleasure. Greetings from Poland :-)

[@CuttingEdgeEngineering]

Hey mate that's awesome thanks for watching glad you enjoyed it

[@jdmccorful]

Enjoy watching the team work. Thanks for the look!

[@CuttingEdgeEngineering]

Our pleasure! Glad you're enjoying it!

[@zee7056]

I've binge watched almost all of your video, love your content. Cheers from Canada.

[@keithwood2984]

I like the slow Mo in the beginning keep up the great work I enjoy watching your videos every day

[@dystopianlucidity4448]

Coffee ✅ comfy chair ✅ Great vid to start my Friday off right, ✅. Cheers Guys! Homeless is looking sharp and keeping things safe, way to go doggo! On a more serious note, I really like the music Your Missus picks for the time lapse, it’s very relaxing. Again, cheers, always love the vids! Much respect from Florida

[@nickmeier9356]

Second that

[@CuttingEdgeEngineering]

Hey mate an awesome comment once again! Thanks for watching glad you are enjoying the vids and editing 😎👍

[@martinthomas5194]

Kurtis your competence and confidence is a thing of beauty. Pleasure to watch a master at work

[@user-id3tt4er4g]

Привет✋👋 я в восторге от твоей работы 👍

[@CuttingEdgeEngineering]

Спасибо, приятель, оцените это!

[@vincemck2002]

Kurtis.....i am strangely addicted to your videos.....Precision being the operative word....mate you are brilliant.....thx....

[@DanPeterSon8]

Это именно тот канал на котором я смотрю ремонтные и производственные работы от начала до конца с интересом. Вы молодцы, так держать! Я.

[@CuttingEdgeEngineering]

Привет, дружище, спасибо за просмотр видео! Мы ценим эту поддержку. Ваше здоровье

[@robertdinicola9225]

I have not used a honing machine in over 30 years but, when you zoomed on on the parts, i could SMELL IT!

[@bambambundy6]

Your channel has become the go to show at lunch! We are on an oil platform in the gulf.

[@CuttingEdgeEngineering]

Wow that's fucken cool, thanks for watching!

[@Celtic_Thylacine]

Making me homesick. Cheers from Dublin. You're doing your bit to spread the word that craftsmanship is a thing of great value. And also the value of just fixing broken shit, not throwing it out.

[@hollypala]

Just in time for my breakfast in Germany. That's how I like it. Greetings go out.

[@CuttingEdgeEngineering]

Greetings mate thanks for watching enjoy your Friday

[@racebanning6390]

EXCELLENT!!! THAT VERTICAL HONING TOOL IS KIKASS!!1 NICE WELD BUILDUP ON THAT FLANGE RADIUS!!

[@cameronwigg7276]

I just discovered your channel and I'm hooked for life! Great skills, great knowledge and great job. A job well done.

[@CuttingEdgeEngineering]

Hey mate welcome to the channel! Glad you are enjoying the vids. Cheers, Kurtis

[@craigf3624]

Great to know their are still people who can do quality work like this................................that actually know what they are doing!

[@graemepennell]

I'm waiting for the time in the out takes for when the dog says "fuck, start again". On a side note, another great video.

[@CuttingEdgeEngineering]

We know he won't get his lines wrong, he is a natural on screen 🤣🤣🤣

[@jdmccorful]

Unlike dad.

[@Stepinup]

Ime also waiting for the inspector to walk in and say fuk

[@djamelhamdia134]

"fuck!........ooh, are we filming? I mean woof"

[@jimsvideos7201]

Nailing the angle on the taper like that is one of those things that speaks to experience.

[@CuttingEdgeEngineering]

Hey Jim thanks for watching mate! 😎👍

[@alfredilberi226]

Охренеть! Этот чувак один заменяет целый завод. Я всё ждал когда он начнёт формовать резиновые манжеты...

[@refiii9499]

He’s got A tool for everything! Perfect 45degree crosshatching! Looks sick.

[@markfoster6110]

Time to go for a beer . I've been welding all day .it's beer time .. another good job . Enjoy your weekend

[@CuttingEdgeEngineering]

Good stuff mate enjoy and have a good weekend ahead 😎👍

[@gregorywright2798]

Amazing Workmanship, Facinating to Watch. I didn't see You test Fit the Piston before the O Rings Were Installed. You are Very Meticulous. Fun to Watch.

[@65cj55]

That Honing Machine reminds me of those Oil Rigs on that Black Gold show.

[@CuttingEdgeEngineering]

Haha we know what we could get into if machining ever ends 🤣👍

[@paulbassindale6737]

The outtakes are great. Though there wouldn't be half as many if Kurtis was a well trained as the safety officer. Keep up the good work guys.

[@grantpatch5450]

I know its meant too..but i gotta say it..that thing looks like a bloody bought one... great job Kurtis.. Love the slowmo and close ups of the chips flying Mrs Kurtis.. Have a great weekend CEEA team..regards Patchy🍻🍻🍻

[@CuttingEdgeEngineering]

Patchy delivers with the awesome comment once again! Thanks mate, we both really appreciate the great support. Cheers 😎👍

[@user-lg3su4zf7u]

Мне нравится твоя работа и атмосфера на вашем рабочем месте, спасибо за познавательное видео и у тебя золотые руки👍👍👍

[@IWANASLAPTHAT]

Curtis, Now If you and the wife done a short video in your garden after a few (good) beers talking about what you have done that day now that would make a great video. Would be good to see if you just talked fine or just go off on one,lol. Stay safe family.

[@CuttingEdgeEngineering]

🤣 after a few drinks who knows what I would blurt out hahaa

[@trevorvanbremen4718]

Actually, I'm pretty sure that MANY of us have a pretty good idea what you'd blurt out Carl!

[@thomaskirkpatrick4031]

Curtis, every time I watch one of your videos I'm more and more impressed with your abilities and your equipment in the shop. Well done.

[@jetegtmeier71]

that was a "Dad pay attention to ME" growl if I ever heard one :)

[@ronaldlaraquest]

Really love watching the projects and the skills. Off topic: Watch out feeding the dog chocolate. It was an tiney piece and most chocolates are fake, but chocalate can be deadly for dogs. Greetings from the Netherlands.

[@gregsappington9991]

I love the slow motion action. And the hard work both y’all do to bring us this awesome awesome videos

[@CuttingEdgeEngineering]

Hey Greg thanks for watching and glad you're enjoying the vids mate. Cheers, Kurtis 😎👍

[@garyevans8116]

The safety bloke is definitely why I watch. These films. He is a great little fella

[@Shreyam_io]

Slomo Security officer running is the best intro. started watching this channel for dogo proactiveness. And some F-bombs from the Artist himself and obviously can't be done without a perfect camerawoman.

[@CuttingEdgeEngineering]

Hahaa yeah the missus thought that slow mo looked funny she's been taking some more slow mo shots of safety officer for future vids 🤣 thanks for watching

[@Aspen51]

Guys - hands down,absolute gold ...... can't get a better way t o remind me of all things good about Aus...... well done & make sure the Safety officer get's an extra schmako for smoko!

[@CuttingEdgeEngineering]

Hey Paul! Glad you enjoyed it mate, a few good things going on in this video. Cheers 😎👍

[@geoffwysham1731]

What a satisfying resolution to Pt. 1! Thanks for another great one, and have a great weekend, team CEE!

[@CuttingEdgeEngineering]

Glad you enjoyed it Geoff thanks for always watching 😎👍

[@Paddington60]

Good to see The Security Officer has the Giggler trained to recognise what he's going to do next and give him treats. I am always impressed when heating something up either fits it to where it needs to go or releasees the part. Thanks Kurtis and Giggler

[@user-sm3fq2tv9p]

Good job, greetings from Kazakhstan!

[@CuttingEdgeEngineering]

Hey mate wow thanks for watching over there mate

[@robertneumann7782]

The shop and the amount of tooling you have shows you work very hard to make it all work in a one man operation the ultimate toy box

[@GMbusa1]

Seeing the pup makes me smile.

[@henryreinhart5912]

Oh wow. That rev-up sound at 13:40 is amazing.

[@dougsholly9323]

Love this channel. I have only subscribed to 2 channels on KZbin, yours being one of them. I find the precision machining on these enormous parts absolutely fascinating. It would be really awesome if ever your customer could share photos or a video clip of your parts being installed or used.

[@Chris-kk8xg]

wonderful stuff, also hats off to the safety officer.

[@misenplace8442]

Now that Vodafone is back online after a 6+ hours NATIONWIDE service down...I can finally get my dose of heavy metal.

[@CuttingEdgeEngineering]

Enjoy mate! 😎👍

[@Gjed16]

Such wonderful teamwork! A joy to watch. Kurtis's mastery of the machine shop equaled only by the "editing and stuff"🤣done by Karen. The camera work is so good you just take it for granted. Always in focus, interesting and informative angles. Can't say enough. I am really enjoying all of your videos. A truly Binge Worthy channel Your skills Kurtis are made even more impressive by your videographer Karen.

[@localcrew]

Happy Safety Doggo is my spirit animal.

[@joelhenderson5404]

Good stuff Kurtis I enjoy watching a master mech.

[@CuttingEdgeEngineering]

Glad you enjoyed it mate

[@alvarogeorgenobregeorge69]

Greetings from Brazil, gooday to all.

[@CuttingEdgeEngineering]

Hey mate thanks for watching! Cheers, Kurtis 😎👍

[@aliasproductions81]

Great videos. I build hydraulic cylinders for a living now and they've been sub arcing the head and baseplate welds BY HAND for 30yrs. Supposedly I'm the best at it they've had and welds have never failed. Which surprises me cause I'm sure there have been numerous Flux inclusions with the welds.

[@RuneLar]

It would be cool if next time you strapped the camera to the honing machine so we can see the inside as it hones.

[@CuttingEdgeEngineering]

Will have to give that a go, the oil splashing on the lens might become an issue

[@evilbrat5376]

Nothing better than "Tongue Tied" out takes to end a video. That Giggle at each one is a trip unto itself. Boss Dog really knows how to preform for his treats too.

[@CuttingEdgeEngineering]

Hey mate thanks for watching!

[@mortglickman3217]

mrs. Carl has gone and done it, Homeless is in slowmo.

[@CuttingEdgeEngineering]

🤣🤣 prepare yourself will be more safety officer slow mo in future vids I'm betting