DIY Predator 212 Scooter

[@PhunkyChikin]

Very nice tig work and build. I am worried about the steerer tube fatiguing at the threads while riding it due to bending loads. May want to consider changing to 1-1/8” and use MTB threadless stem, and/or support with upper bearings/longer head tube.

[@rickramirez6854]

Geez I wish I was as talented as this guy he made everything look so easy he is obviously a professional keep up the good work and videos

[@cutweldbuild7528]

Thank you

[@Nickpeezy94]

I love that mini gas tank your build is quality .... ✌🏽🇺🇸👍🏽

[@USMC-Sniper-0137]

Good for 50 feet of travel LOL..

[@marcosgalvez8995]

@@USMC-Sniper-0137 nnn

[@VasilyBuilds]

Nice fabrication skills 💪 Gotta learn from you!

[@mechanicalking]

You're going to get some subs👍

[@xani123123]

@@mechanicalking Congratulations to the scooter friend here in Brazil I have one made by my hands. We use a honda 7.0 hp (212cc) engine. It has incredible torque. Please email me [e-mail] and I will send you photos of my project. I use it to go to work and to the course, but my scooter has a structure different from yours that we call here as an original walking machine. It comes equipped with a 2 stroke 37cc engine, very weak, it can not handle climbs, I replace it with a stationary motor, question in your project already thought of putting a torque converter ...

[@mechanicalking]

@@xani123123 Yes, thank you. Mine has worked for a few rides but I need a good pull start. I will make a new video someday

[@xani123123]

@@mechanicalking I wait for the video friend, a question I did not see the brake of your scooter

[@gregsteele9002]

You can turn the governor screw way out and get up till like 4800 RPM instead of 3600 without removing the governor

[@moosedrummer1]

Greg Steele or take it out

[@MrValhallaKing]

I would take it out. Shattered plastic in the motor is too big a risk.

[@juanbracamontes]

www.ebay.com/usr/bracosma-40

[@ВадимКузнецов-з2й]

... отличная получилась техника для езды на работу!-, заказы случайно не принимаете?-, а то купил бы себе такой-же!!!

[@jacookerbad]

Shock absorber with rubber engine mounts to lessen vibration at high speeds

[@FrustratedBaboon]

And there's your bread!!! Is the front fork aluminum I could not tell. From the welds it appeared to be steel.

[@cutweldbuild7528]

its stainless

[@kellyrenzi9560]

Love it 100% Fabrication stands for I build shit that you can't! Figure it out people

[@trinkladd]

Beautiful welds man. Nice job as well

[@cutweldbuild7528]

Thank you

[@ПавелБушланов-ц1э]

Мастер, молодец. У нас , в России такое не прокатит. Заставят получить права за 25 000 рублей.

[@gingerbread1032]

Got a pink girly razor ride on I'm gonna sneek a chain saw motor into and refinish in starlight blue and silver.

[@christianlopez8662]

un genio oye como le pongo una marcha electrica a una como la que hiciste.

[@lorenzovega8716]

Sick ped! Looks amazing. I just hate the sound of a predator engine. Needs 2 stroke

[@celsomelloke8575]

my friend really liked your project how to assemble an equal you can give me the measurements of the frame.

[@ejb2184]

Nice but I think I might have missed the part that you installed breaks

[@casemods]

Brakes*

[@FairvioyenPJ509]

Nice videos. I like it

[@MrValhallaKing]

Finally finished this build. Mine does not look as clean as yours but it is finished and it runs and that's all I can ask lol. Thanks for the inspiration.

[@marthafuentes1450]

Jamescamera9 made one too. You guys should start a club 8)

[@UltimateMaking]

very nice build, where did you get the kart wheels and axles ? I find it really hard to find axles

[@cutweldbuild7528]

Amazon just cut the axle down

[@redneckqc4317]

Moi je les achète sur go power sport, mais au Canada la livraison doit être moins chère quand France. Essaye le code CC10 ça te fais un rabais de 10%.

[@MrTimasss]

Я не понял как резко тормозить собираетесь при необходимости? Движком быстро не остановитесь.

[@MGszamanVlog]

hi can I use part of your video to my compilation homemade inventions ?

[@geraldhawkins2643]

Man that’s awesome you did an amazing job !!!!!

[@cutweldbuild7528]

Thank you

[@elfatigas17]

Está bonita pero le falta una cosa le falta guardabarro atrás alante para las la salpicaduras del agua y el barro que salpican las ruedas

[@MrGarda42]

Would love to see Shock Absorbers modded to this

[@randyneil6161]

Great build but you should have at least leave a link as to where I can get those parts.

[@randyneil6161]

Everything in one nice video.

[@steven-vn9ui]

Wow, your fab skills are amazing. Those welds are just perfect!

[@cutweldbuild7528]

thank you

[@loadthebowl]

bro aint playin around

[@aguinaldosantos129]

Vc gostou

[@landtowater_2747]

he must make millions to have a shop like that

[@armenvegas]

Why switch tig to mig? Cool build . Trying to learn thanks.

[@cutweldbuild7528]

Preference is all

[@armenvegas]

@@cutweldbuild7528 I've been trying to flux core mig chrome molly and aluminium . I've been able to with the molly but not aluminium. Is this not possible?

[@cutweldbuild7528]

Fluxcore aluminum isnt possibly

[@tonymontalban5603]

#####.... This Guy is a Stone Cold Professional. OUTSTANDING

[@83RBurke]

Cool build but the connection between platform and fork/head tube is not safe.

[@cutweldbuild7528]

How so?

[@83RBurke]

Cut Weld Build I could be wrong but I’d feel better about it if there was tabs and slots interface between the curved metal pieces and the frame prior to welding. It’s just a butt joint in woodworking terms. I still like your work though that thing is radical!

[@jayg1989]

Nice work💪💪, how much u selling it for bro, im interested in one

[@fletcher3913]

Nice build. But no brakes? How does that work?

[@cutweldbuild7528]

Just didnt bother to put any on

[@Tahmanakki]

@@cutweldbuild7528 My man

[@Понемногупровсё-и9в]

Здравствуйте. Какие это колеса от карта? Задние или передние?! Сколько дюймов колесо?

[@eduardoladeus1011]

Porfavor en viarme las mediadas de construcion quedo a tento asu tespuesta

[@nismoman420]

Sexy beyond belief. Such a great fabricator. Would have loved more footage of you riding, especially a top speed and acceleration test. You should be selling these things!

[@vancemacd6315]

Clean build, nice work

[@jallen1931]

Great Video Style Well Cut..No BS

[@johnbeer4963]

don't get me wrong this is so cool it's frozen solid but it can't really count as DIY. I'd say more "professional with small scale manufacturing facility makes project look fantastically easier than it is"

[@o0julek0o]

I wouldn't quite say so. If you have just a few tools, you can definitely do this at home. Not only that, but there has popped up a myriad of services offering things like CNCing parts using your own design files, which would help plenty here. Otherwise you don't need much more than an angle grinder, a welder and some basic tools along with a can of decent spray paint. This is definitely DIY, just not on the same level as origami or knitting.

[@johnbeer4963]

@@o0julek0o TIG welder, something to cut that thick af metal like a band saw, either some CNC device or the ability to farm out your CNC stuff.. sure, you can make a diy with far less tools, or even convert a preexisting scooter without even a welder... but it's not going to look like this, or be in any way time effective to make this way without the machine shop he has.... not to mention the evident high skill level. You could have some company make all the stuff sure... but then it costs a fortune to make, like, good used car money

[@WeldersOnly]

The guy did it himself and didnt buy it prebuilt, I'd say that's the definition of DIY.

[@dpkcreativity]

Fit Should be battery and motor assembly. बैटरी और इलेक्ट्रिक मोटर फिट करके बनाना ज्यादा अच्छा रहता

[@robspear03]

@@WeldersOnly By that logic... My vehicles were made by a team of DIYers. 😅

[@bonezcuztomz7703]

Nice build what size square tube u use

[@cutweldbuild7528]

1x2

[@bonezcuztomz7703]

@@cutweldbuild7528 thanks

[@bonezcuztomz7703]

1x2 rectangle tube what's the thickness on the material

[@JeffMusicFL]

This is the best build I've seen! Awesome fabrication! For the front fork did you find one already made or cut one yourself out of rectangle tube? If so, what thickness would you suggest. Thanks!

[@Anthony-uz5tj]

looks like 3/4 of an inch steel bent in two places go back to very start of video about 40 seconds in

[@JackJohnson-xd2ln]

Front fork looks like it came from one of the legs on a zero-turn mower.. js

[@cutweldbuild7528]

Hahah nope i made it

[@aarondavis5535]

Wow nice work I want one

[@sittinlow6787]

Just found your channel and I love it. Keep up the good work and might wanna swap to a bit bigger sprocket on the rear, it’ll perform much better

[@harryburford6629]

your gas tank looks lose but i could be wrong great video though

[@Calthecool]

Dang, this thing would be scary to ride. 212’s are no joke, especially with the right mods.

[@WowHughJanus]

The concept of DIY has gone out the window in this vid. Lol

[@Bikey4LifeeNB]

Respect!👍🏼

[@duvielhernandez2887]

Rear sprocket too small i can hear the clutch burning but anyway nice built

[@JOSHUAloves1]

Super great work!

[@bighomieJ5X]

Nice build , u got mad skills . Now here comes the magical question , how much for the frame and wheels no motor ??🤗🤗

[@Gamleprofil]

Steel is about $2 per kg in norway. I guess this weight about 30KG, so $60

[@gargar209]

i cant figure out what keeps the handle bars from spinning free from the forks. seems like a weak point where that long tube is welded to the headset cap. ive have goped bars break right there

[@namelessvermillion8188]

For some reason watching you weld is amazing.

[@cutweldbuild7528]

Thank you new video coming soon

[@TwistedGorillaFab]

Needs a two-stroke! Nice build

[@erikeduardoch.p.2990]

What kind of equipment do you have for welding? Give me information. Friend

[@Cocommunities]

Why have I only just found this channel

[@luisbenitez3428]

Buddy GoPed has nothing on you,, I'll take two ,nice job

[@83Goldy]

I love it. Exactly what I want. You should make scooters for sale. Customer number #1 here. 🙋🏻‍♂️

[@sebsshed2068]

So what’s your point?

[@GoKartsorGoneFishin]

Awesome job!

[@giannibacani6897]

I wud like to know if u don’t mind,what kind of welder tools do you use

[@cutweldbuild7528]

Everlast mts

[@wahyudikarya3031]

Great job Man...

[@dantesolomon311]

en ciudad el patinete te lo quita la policia enceguida si va a gasolina y te meten una multa de 300

[@rogtel1932]

Fala aí garoto. Que solda é essa que vc usou?

[@ThinkTwicePS4Gaming]

broooo those are some sexy welds

[@마이크타이즈]

Good jab ~ What is the name of the engine attached to the shaft?

[@clarkluke6108]

It is a predator 212cc from Harbor Freight.

[@DJSOULIS]

*Great Job.. You forget the Brakes & the Stand*

[@xlasvegan7x]

That’s an Acorn table gotta a super old school👍

[@titanbuildseverything6813]

please what was the size of wheels used and sprocket diameter

[@marcoxrizzvlogs9850]

Nice work! Whats the top speed?

[@cutweldbuild7528]

about 40

[@redlinexxx4256]

very nice fab work but you know the deck needed to be longer your ment to be able to plant your feet as if you were riding a skate board

[@travisestes6217]

Why did you opt for such a wide front tire? I am genuinely just trying to understand advantages/disadvantages of thin vs wide tires on these mini motors, not built for off-roading.

[@cutweldbuild7528]

Its was just a set of tires i had so i used them no reason other then that

[@Tahmanakki]

@@cutweldbuild7528 actually on this its quite good. More rolling resistance so no brakes needed and looks good

[@heribertocruz1610]

Greetings I would like to know where I can get axle hub kit .. and the gums and the ... I am from Puerto Rico and I can not get it quality

[@samleen]

Do you think I could set up a predator 212 on my razor e300?

[@danielbargas3377]

It's geared for like a 60 mph top speed

[@meshaneh8138]

Great build! Love your style of video.

[@16driver16]

Looks like maybe a little bigger sprocket in the rear would wake it up.

[@USMC-Sniper-0137]

Yes, more torque and less speed then. I would put a belt clutch on it.

[@jimvargaco.6344]

@@USMC-Sniper-0137 maybe even a two speed belt clutch

[@batscher61]

He He Wo hast du die Flihkraftkupplung her für den GX 120

[@dallasbutts345]

32 tooth and no governor gets you 46 mph. I pass cars with mine. Almost same exact setup. Oh I have a seat too

[@GSGExtreme44]

And he was never seen or heard from again...

[@BigRig003]

A seat and a maybe some lower gearing would do wonders. None the less, very, very clean build

[@gariklipin106]

...пиздатый самокат сделал!!! Молоток!!!))))😄⚛⚛⚛⚛⚛

[@damdifido1]

Nice welds

[@serhhupper2236]

Skills how long did u plan it colect parts and stuff

[@amscout1156]

Very nicely done. Once I get my powertig welder I might give something like this a try.

[@pierrotcrenadez8242]

Merci

[@Kedoyy212]

Bg bagi donk satu scuter buatan nx bagus banget bg salam dari Indonesia bg tepat nx saya ada di Kalimantan bg makasih ya bg sukses selalu bg 🤗🤗🤗

[@nounouberbez]

Bravo! C'est super jolie en plus 👍

[@gregsteele9002]

They sell 49cc stickers to go over the 212 stickers for $3 online

[@elfatigas17]

Qué vale hacer está scooter espero que me responda gracias

[@elfatigas17]

También lo hace usted con amortiguación porque si lo hace con amortización me gustaría que me hiciera el presupuesto es

[@MrVeggis1964]

Cool man 👍 But a bit short?

[@Sor00]

Very cool Device!

[@lazzer408]

Flip the clutch over and run the chain inside the frame.

[@riccardofio3049]

Buonasera, mia sorella ne vorrebbe uno uguale per teletrasportarsi a scuola la mattina presto, puoi aggiungere un parabrezza sennò le vanno i moscini nell' occhi? Grazie Riccardo

[@aeroflopper]

And brakes come later?

[@derpydog1008]

That's a cool scooter but if you put a bigger sprocket on the back you will have more power and better performance.

[@cutweldbuild7528]

Yes but less top speed

[@IBN001]

Che me encantó todo pero y el freno? Ese parece un motor 150cc.hay que frenar todo ese peso de motor y carrocería..

[@-DIYPRO-]

And powder coating! This thing is pretty sweet!

[@bouncingbetty3045]

You have great talent. Keep the vids coming

[@cutweldbuild7528]

Thank you

[@johnbuckeye9590]

Do you have a parts listm

[@AntikorPerm]

Сколько стоит, какая мощность скорость????