Cxracing remote mount oil pump pros and cons

[@Musik-h7y]

Beautiful workmanship 👍 That oil pump looks like a rebranded 30psi Chinese $95 free shipping scavenge oil pump. Probably explain the need to seal it to stop oil leaks.

[@HotDamnRacingTeam]

Thank you 🙏 that pump is a Chinese rebrand, but definitely exceeds 30psi. Still being used on my current build. The only complaint I have is that is loud. But I can not hear it when the engine is running. Big lifted crew cab 4x4 ram 1500 turbo hemi build update video kzbin.info/www/bejne/anq3p3SgqbOIq5I

[@seanlutzi2911]

dude, your worksmanship is serious art! it is impeccable! i am so impressed with how clean the whole system is, front to back... i wish people who take on a project in their backyard(garage) no less, had the patience and knowledge to put a system together like you did... cudos man... awesome. i am copying your set up to a tee, just for a chevy but have i learned from you .. im two months out thanks for all the info.... im looking to just pull a trailer alot easier, not for racing.... but 6-8 psi will help out the lil 5.3

[@HotDamnRacingTeam]

You are awesome! I hope to hear from you after you have finished building your kit. Thank you.

[@martygarcia7426]

I have the same pump and went with the turbowerx spartan pump thinking it was better and it couldn't keep up and my oil was backing up. i didn't want to spend another $400 for the EXA pump that's huge and probably wouldn't fit in the pump location anyway. Turbowerx is quiet for sure but not as strong as these cheaper ebay pumps i feel . Put the cx racing pump back on and haven't looked back.

[@HotDamnRacingTeam]

You the man! This is very helpful thank you!

[@giralds2016]

Nice setup.. I'll be embarking on this mission soon. Good call on the inline sight glass... something I will consider to monitor flow. Suggestion.. won't hurt to run a relay from the pump to have a light in the cabin indicate if the pump dies. I've heard mixed reviews on the exo pumps.. a tuner friend of mine told me to essentially buy cheap marine pumps and expect them to have a limited life span, but to run a checkvalved bypass so the oil has somewhere to go if the pump fails

[@HotDamnRacingTeam]

Thank you! I have recently moved the sight glass right under the turbo. My pump has been amazing so far, good idea about the light in the cab. I actually placed a sensor port just for that but haven’t used it yet. kzbin.info/www/bejne/eZ7OY5WZfrCBick

[@HotDamnRacingTeam]

kzbin.info/www/bejne/Y5KTkqenh7qGe9k

[@FullBoostJ4]

Heard lots of good things about the turboworx pump

[@HotDamnRacingTeam]

Still haven’t got one, supposedly it’s quiet. I probably would hardly notice the difference.

[@06bmcGT]

@hotdamnracingteam What an awesome setup you have! May I ask what type/brand of -an fitting you are using between everything, also what check valve are you using? I’m running a low mount turbo and I believe there is a drain issue, causing smoking coming from exhaust at times, as well as the catch can. Thank you!

[@HotDamnRacingTeam]

I used eBay and Amazon fittings

[@gritpump]

Without a heatsink and with hot turbo oil, they can overheat and stop running. Happened to me...Smoke Show.

[@HotDamnRacingTeam]

My oil stays cool and the oil hitting the pump is rather cool too but you are right. I smoked out my turbo like 5 times already lmfao. Bad pump wiring on my part. The pump shouldn’t have an issue running 200 plus degrees for a short time. I did mention I’m getting a turbowerx pump and that this was temporary.

[@anthonyromero7822]

Could I have a list of parts? I know you got a video of a drawing and list. But it looks like you got some new stuff.

[@HotDamnRacingTeam]

I will make a list

[@vgnfab]

Any thoughts for me? I'm trying to design my oil feed setup. I'm thinking one of these cheap pumps, maybe a redundant second in parallel with a check valve. Locate the pumps below a reservoir. I have a 4 cyl outback with a compound turbo. Built it with the largest oil pump. but even one turbo drops the idle oil pressure from 25 to 15 psi when warm. Based on you saying the pump is quiet when there's oil at it's inlet, I'm thinking this setup should avoid me the embarrassing noisiness from the pump. What did you do for the electric control you alluded to?

[@HotDamnRacingTeam]

I would recommend a turbowerx scavenging pump if you are looking for the least amount of noise. My electrical controller I got off eBay, watch out for the amp rated. You want it high.

[@dbrownent]

Did you like the turbowerx pump over this pump

[@HotDamnRacingTeam]

I haven’t purchased the pump. I’m still rocking the original in this video. Currently I’m upgrading the engine, MMX fuel pump, 1200cc injectors, Holly hi ram etc.

[@jerrywelch870]

Where did you get the check valve and has it ever failed on you?

[@HotDamnRacingTeam]

Which check valve? Before or after the turbo. To this day both are working. I have the part numbers written down somewhere.

[@CreoleNick]

Could you share a link to the sight glass your using? I would like to add one to my scavenge system.

[@HotDamnRacingTeam]

It was so long ago and found on eBay. I’ll have to look for it, I’ll need time.

[@SET2RAGE]

Where can I find that see through tube?

[@HotDamnRacingTeam]

eBay

[@SET2RAGE]

@@HotDamnRacingTeam is it possible for you to post a link? I would greatly appreciate it i can't find it because I don't know the direct name of it.

[@SET2RAGE]

@@HotDamnRacingTeam want to use it for my maserati granturismo turbo build... Although I won't be tapping into the oil pan, gonna use a stand alone dry sump tank in the trunk and use a scavenger pump to feed the turbos oil...

[@SET2RAGE]

I also plan on buying the pump you have...

[@DhatLex]

Did you ever get the turbowerx pump? I’m currently running it and love it. I added vibration mounts to the bracket I made. It’s so quiet 😂

[@HotDamnRacingTeam]

Not yet 😭

[@adrieneverett9476]

I know im randomly asking but does any of you know a way to get back into an Instagram account? I stupidly lost the login password. I would appreciate any help you can offer me!

[@levilance7049]

@Adrien Everett Instablaster ;)

[@adrieneverett9476]

@Levi Lance Thanks so much for your reply. I found the site on google and Im trying it out atm. I see it takes a while so I will reply here later with my results.

[@adrieneverett9476]

@Levi Lance it worked and I finally got access to my account again. I am so happy:D Thank you so much you really help me out !

[@FFMotorsports22]

How is it wired?

[@HotDamnRacingTeam]

It’s wired with relays to the fuel pump.

[@FFMotorsports22]

@@HotDamnRacingTeam could you make a vid or dm me I just got a new set up and right now trying to figure out how to wire it to the fuel pump or to a turbo timer it’s the last thing I need to do so I can start the car

[@TEKSMRT]

Besides the issues you mentioned that you already fixed, why are you still swapping to the Turbowerx? Just the noise?

[@HotDamnRacingTeam]

Noise and quality, I still have hot summers to R&D. Turbowerks has a heat sink also.

[@TEKSMRT]

@@HotDamnRacingTeam - thanks again!!

[@HotDamnRacingTeam]

Anytime I can 😁, you are very welcome.

[@chispagiddings]

Why the sensor plug after the pump and not before??

[@HotDamnRacingTeam]

Good question, the sensor is in between the pump and check valve. This will put pressure on the sensor, no pressure pump is down.

[@chispagiddings]

@@HotDamnRacingTeam thanks! Actually my pump died a few weeks ago, and I didn’t notice and killed my turbo, so now I need something to tell me if the pump die again 🙃

[@HotDamnRacingTeam]

@@chispagiddings Absolutely my friend

[@chispagiddings]

Another question, how do you prime the pump??

[@WorstPaperCut]

does this pump generate PSI?

[@HotDamnRacingTeam]

It creates plenty of vacuum and pressure.

[@WorstPaperCut]

@@HotDamnRacingTeam So can I run it as a standalone oil system for a rear mount turbo? I dont want to bother running a long line from the engine.

[@kiddgrower9860]

Noice

[@HotDamnRacingTeam]

Thank you

[@nobullshiit5682]

Turbowerx is way too expensive shit $220 for a cxracing pump is expensive and for what a bit quieter nah ill stick with the cxracing pump

[@HotDamnRacingTeam]

Cost has been going up and up unfortunately. Cxracing used to be cheaper.