CyC X1 PRO unboxing and installation video. Converting mundraker Summum pro to electric bike

[@2wheels4life2]

👍 , this CyC setup will work on my Banshee Legend Mk2 by the looks of it,thanks for the tutorial,now I know what I need to make my ride more fun.

[@crapenter3392]

That’s why these damn motors are kinda difficult to get, this fuckin guy bought them all

[@jerseyguy-hq8wv]

Absolutely beautiful ebike. The CyC motor looks like it was designed for that bike. Can't wait to see it in action.

[@edwinayaan3523]

i know Im randomly asking but does anyone know of a method to log back into an instagram account? I was stupid lost my login password. I love any help you can offer me.

[@edwinayaan3523]

@Caspian Niko It worked and I finally got access to my account again. I'm so happy! Thank you so much, you saved my ass!

[@caspianniko8555]

@Edwin Ayaan you are welcome =)

[@rlanesports]

The bike alone cost $7K.

[@bazylee]

Nice video mate! I am looking forward to the one from riding the final bike :)

[@SD_Alias]

Would´t it be better to mount a bike rack and mount the battery on it above the rear wheel?

[@acelectricalsecurity]

I considered this motor, but they still seem to have issues with magnets becoming detached and other issues. Shame really as it's a neat unit with some nice tech. I opted for the bafang HD, not as neat or as technical as cyc, but seemed more reliable.

[@arkeye01]

Website says no parts available 🤷🏼‍♂️

[@cinergiflims]

Great to see how simple it all is. I think you could have trimmed it a little to have a tighter edit but over all this is great.

[@evolutionpowerbikes3729]

Thanks My first edit with talking to camera still need to learn a lot;)

[@SD_Alias]

It looks nice. But why that extra chain and not a closed gear like the BBS Bafangs? Isn´t an open chain more prone to wear and dirt than a closed gear housing?

[@chucknoob7041]

I think the chain drive allows the motor to be moved away from the chainring. Makes for fitting into the triangle possible on a lot of bikes and also gives a tighter fit under the frame. The nice part is the controller is fit in the space behind the motor. However with that controller (BAC855) the system is limited to 3000watts. CYC offers another larger controller (BAC2000) that allows the 5000watts BUT you need to mount it separately. As far as wear. You won’t see any more wear than you would from say a motorcycle (or bike) chain. No problem.

[@motoguru4016]

Does it even ride? Got any video?

[@kevinnashskitchen3517]

I'm wondering why not put the motor on a big heavy fat tire bike with big rack on back.? Huge 7 speed bike frame and fenders with a rack.. Built for commuting and comfort. Suspension post and cloud 9 cruiser seat.. Put 2 of the 72 V 20 ah batteries on back rack with a battery blender. Have a nice rear heavy duty gear set. Then you have a great comfortable cruiser fat tire bike that can go 40 mph and with a 80 mile range . 👍

[@marekherda5420]

Fajny build Lukasz 💪

[@rickdavid1795]

I put the CYC gen2 with (BAC) 855 on my bike. The power is intoxicating

[@chrisMc1972]

What kind of speed did you get torque?

[@rickdavid1795]

@@chrisMc1972 It’s got amazing power. I’ve had it to 48 mph running 20s lipos 72 volts

[@Sanctuary.Studio.D1]

Very clever design. Lads. Fair play to you!

[@arnoldsatombo186]

high guys ,please help on were i can google and order this motor online .a link would definitely help

[@bastix]

Are those special tools for the brackets included or is it also money trashing?

[@MateuszMatiSieron]

Very nice guide video!

[@dougnash6316]

Looks good. I see you put padding between the motor and the frame which is important because CF does not like abrasion. Also I hope you have a good disconnect from your battery pack to the bike for when you crash or fall off the bike. The controller seems small for the amount of power you might draw. What about a bash plate to protect the motor?

[@rickchupp4782]

aa am Ba and aa all A Am a am all aZ am aaa and a an AA aaac am at a Anna a an ASS AM ALL A AND t and sNa am be

[@VoTaXHD]

That's exactly what I wanted to build! Thank you

[@VoTaXHD]

@@shockadellick Ah yes e-bikes cause cancer, thanks for your smart input

[@malekabdelhediofficielsoci6513]

المسافة ؟ و السرعة القصوى ؟

[@greigotee8585]

dis he say 5000 volts?

[@malekabdelhediofficielsoci6513]

يعطيك الصحة ... و ليه ذلك المغناطيس فهل للعداد أم للفرامل الخلفية ؟😂😂😀😁

[@dt648]

Power 5000 volts ?

[@ianl5669]

Any go up to 120mm crank?

[@dave9456]

Awesome Great demo 👍

[@jonasu8293]

You should put throttle on left side. Handgrip - throttle- brakes-lcd.

[@pipito588]

nice motor bat do you have normal bettery like bafang installation kit

[@LaQuinnH]

would this kit fit on a mid bb like a bmx bike?

[@Trumppower]

Has it Bafang brake connectors ?

[@evolutionpowerbikes3729]

Yes kits from my shop include bafang brake connector

[@motormikemakropshop3137]

so0 nice the best looking and highest performance ive seen yet man how about me ride and advertise for yall id get you sales no one in jersey is doing ebikes just yet but me

[@dimitriskatsaros4401]

Θα μπορουσατε σας παρακαλω να μου πειτε την τιμη απο αυτο το μοτερ.σας ευχαριστω.περιμενω απαντηση σας.

[@duncanhorne962]

I would really be Interested In this conversation kit, as I have a brand new European folding bike, fully built but unridden, so I am In the market. I hope to see the following video, as I want fun. I can't see any problems, can you? Please bring on the next level, as only been Involved on E-Bikes. As mentioned, not long at all, I was on a motorbike beforehand. Would this be COMPATIBLE with the fully built, folding EUROBIKE good suspension & I have iT made & waiting for the correct kit?

[@dougnash6316]

You don't show the continous current draw. My bike is 48V @ 40Amp continous draw which is 2000 watts basically. Cyclone motor which is a lot larger by comparison but cheaper.

[@weathdone]

hey buddy great vid.. what do u do if u have a press fit and u dont wanna take out BB? can u use it with the stock BB.. i have scott gambler 710

[@chucknoob7041]

That controller won’t allow the system to reach 5000watts. You’ll need the larger controller, the BAC2000 which needs to be mounted separate from the motor. Awesome build and fit of the motor!

[@kyleo1236]

No way it's 5000 volts. That would be incredibly dangerous. You probably meant 5000 watts and that's really high for an ebike motor. Also, what's with the square shank spindle and crank arms? Those inevitably work their way out over time and become very frustrating.

[@Biggreydog]

Its plugged straight into chernoble.

[@Strange_Brew]

Yeah and he’s talking about carrying 5000 volts in a backpack. “ and the neighbors said they saw was a bright flash and a puff of smoke and he was gone!”

[@caseytrombley4807]

Do you hit the motor when riding? Seems low.

[@brianf.burkejr.1488]

Be aware that the maximum torque to reach the gearing is 240 Nm. If you are considering an enclosed planetary gear solution, stay away from anything but the Pinion transmission, up to 18 speeds. It has a 240Nm torque rating the Rohloff for instance has a rating that is 1/2 that. it will also eat up the smaller rear sprockets if you run it with the full 72V. it is a well-designed amazing power assist solution, with both torque and cadence sensors. The first reduction consists of metal planetary gears on the end of the motor, then a sprocket and heavy chain reduction. In contrast, the BAFAND BBSD and UKTRA have all internal planetary gears for motor speed reduction and they are nylon, there are aftermarket metal replacement gears. the controller ith it MOSFETS and Capacitors are all housed in the same container as the motor. the CYC has an outboard controller which is far better for heat dissipation.

[@rent2ownnz]

These kits look really good ... but 40% more expensive than the Bafang 630 Mid Drive unit. Such a shame as it just makes it that much more expensive to convert and when want power and are price sensitive.... this kit is just too expensive to consider. (I almost bought one last night ... but instead bought the BAFANG unit out of China.

[@johnnychau967]

Where did you buy that sprocket remover tool at? I need to do the same and remove that sprocket from my cyc x gen 2 motor as well, please help, thank you

[@listeks2525]

EBay two arm removal tool for car wipers. If you don't have this tool you can remove freewheel from crank arm then fit it with chain is well

[@chrisMc1972]

Where is the test video my friend?

[@evolutionpowerbikes3729]

kzbin.info/www/bejne/r4nGcqiqodOmldk

[@MrChelseafc88]

How much do you charge to put this on a bike for me? I could do it but havnt got time for a long time

[@orican6513]

And where is the test, ı wait one year!

[@ALGOMAPMT5]

make some more videos on the 20kw bike

[@ThorfinnurPetur]

Where did you get the battery pack? Do you have a link for the BMS?

[@EyalYablonka]

He did not publish the follow-up video of him testing this build. Should we assume the worst?

[@listeks2525]

One of previous video is cyc ride. I didn't manage to get full vidieo done as was busy then weather is was not the best soon when be warmer and less mud will do one

[@markbuxton2368]

I'd be concerned about that amount of torque through the spokes of a push bike wheel, are you planning on upgrading the wheel?

[@NitroNuggetTV]

they're designed to take some extreme loads through their normal intended use, I doubt the motor can output more force than what they'd normally see when landing a jump or hitting three roots. The freehub and cassette are probably the things being pushed way above their intended spec, but they wont have a disastrous effect if they fail.

[@ballpythonlover10]

How much is the 20,000w ebike? Whats the range on it too?

[@cryptohican4509]

Do they ship to the united states?

[@michald4439]

witam swietny filmik ! Jak z zywotnoscia tego silnika ?? Mozna wiedziec jaki jest stan licznika na ten moment i czy cos bylo wymieniane?? Pozdrawiam

[@evolutionpowerbikes3729]

Lancuch wymeniem miedzy 1500-2500km zalezy od stylu jazdy I warunkow a silnik jeden ma ponad 5tys km i smiga. Wolnobieg na korbie smasuje dos czesto to najslabczy element tego napedu reszta daje rade

[@phglub9917]

@@evolutionpowerbikes3729 1500-2500km to mówisz o łańcuchu rowerowym czy tym od silnika?

[@evolutionpowerbikes3729]

Lancuch rowerowy. Ten od silnika jak jest czyszczony I smarowany to tysiace wytrzma

[@michald4439]

Jaka jest moc przy baterii 48v i sterowniku bac855?

[@evolutionpowerbikes3729]

@@michald4439 bac855 ma 50a wiec przy baterii 48v okolo 2500w

[@cocosloan3748]

Nice job. Expensive tho...

[@ebRyder]

If the battery is carried in a back pack or mounted on the bike, it's still under the same load. Just say you didn't have the room to mount it.

[@chevyssboy89]

I wana buy this motor for a project whats ur top speed

[@evolutionpowerbikes3729]

All depend on rider waight bike gear setup battery volts. 107kg rider on this bike with 72v battery Im getting 75kmh max for short time. Around 60kmh can travel for few miles.

[@xxnotmuchxx]

@@evolutionpowerbikes3729 so after 7 months what can u say about this ebike kit?

[@krzysztofbaraniow]

Fajna rzecz

[@loolyou]

5000 volts ✨✨

[@SIMONC256]

you dont need to remove the pinion gear to put the chain on, wow, that's crazy

[@evolutionpowerbikes3729]

no you don't have to, you can screw chain ring to freewheel incited when fitting chain

[@sp404ex]

5000 volts? 5000 watts maybe.

[@robertgold482]

Bardzo fajny filmik. Mam dwa pytania jaki prąd zasila silnik ile Volt i możesz podać producenta ściągacza tak żebym mógł gdzieś go kupić mały zwinny napewno się przyda

[@evolutionpowerbikes3729]

Witam. Zasilanie 36-72v i 65a szczegóły w opisie tu epb.ecwid.com/CYC-X1-Pro-Gen2-Mid-drive-Motor-36V%E2%80%9372V-with-Torque-Sensing-65A-controller-3000-5000W-p93515500 Szukaj "ściągacz do wycieraczek" musi mieć długie ramiona. Pozdrawiam

[@bazylee]

Witam, na filmie prezentuje Pan baterię bodajże na ogniwach samsung 30Q w pakiecie 20s5p jeśli się nie mylę. Czyli razem 15Ah / 1120Wh. Jaki jest mniej więcej zasięg "na manetce" z taką baterią? Da radę bez pedałowania zrobić nim chociaż z 35-40 km? Miałem porównywalny (mocowo) silnik typu hub (mxus 3k-turbo) który miał moc 3,5kW w piku a jak jeździłem bez wspomagania to wychodziło ok 25Wh na kilometr. Czy tutaj będzie podobne przeliczenie, czy CYC jest mniej/bardziej "paliwożerny"? :) No i czy da radę od Was kupić silnik razem z baterią od razu np.? I jaki byłby koszt wliczając wysyłkę do PL jeśli to wchodzi w grę? Dzięki!

[@evolutionpowerbikes3729]

@@bazylee dużo zależy od prędkości i wagi użytkownika jadąc 25kmh przejedziemy dwa razy więcej niż jadąc 40kmh. Ostra szybka jazda do 60kmh taka bateria ledwo wystarczy na 30km zużycie jest bardzo podobne jak w hubie z taka sama mocą. Średnio zazwyczaj wystarcza mi 45km dość szybkiej jazdy z pedałowaniem. Ostatnie zestawy mam wyprzedane ze stoku lecz nowe są już zamówione. Co do batterii tak robię sam w UK i będzie koszt dużo droższy pewnie niż możesz kupić w Polsce.

[@Thrashaero]

damn how many bills did that bike cost ?

[@evolutionpowerbikes3729]

New bike Mondaker summum pro carbon cost£8500 plus cyc x1 pro an battery from £1650

[@Thrashaero]

@@evolutionpowerbikes3729 at that point i'd rather just get a dirt bike

[@kiwimon3204]

@@Thrashaero that's expensive. May az well buy a Stealth Bomber b52 bike. Or a dirt bike lol.

[@RinksRides]

so.. you put thermite grenade on your back for when you fall off and land on it?! Just be sure to be recording this when you do fall off please. Good video, much youtube revenue when pack is damaged and BIG fire!

[@wreckitralph2037]

Is the whole kit waterproof?? Rad build man!

[@diogombmonteiro]

This square taper bottom bracket on a downhill bike, hmmm, seems legit! 🤣😂

[@oadamo]

the whole thing is just a repackage 80100 motor. i built the same type of bike about 8 years ago. battery lasted about 10 mins full power.

[@moonshot1999]

Awesome video guys😎 will this motor be too much punishment for a Mondraker Foxy Carbon RR SL 27.5" 2018 150mm ? Not as hardcore as the Summum Pro suspension, but if it will work maybe I can order it from you guys (based in England, UK 😉) the battery is 72v & weighs 5kg in this video?👍🏿

[@stevehawkins7826]

Beautiful E-bike conversion , only a dream for me , too poor

[@yootoober2009]

not 5,000 volts, it's 5,000 watts or about 6.7 hp...

[@kjm-ch7jc]

That drive chain will have a short life with the extra torque from the motor.

[@what-about-mike83]

This is true but with good care you prob get 1000-2000miles out of cassette, less for chain, it all depends on how much you gear shift, hill climbs and what power levels you run, and for how long

[@Crosshatch1212]

So that must be the old one new one looks works better,

[@ixxolos]

So being able to use alternate controllers for this motor kit, would the Phaserunner from Grintechnologies be a worth candidate to pair with it?

[@brianf.burkejr.1488]

NO, read the CYC site.

[@ixxolos]

@@brianf.burkejr.1488 I ended up getting the ASI 855 with the kit an stuck to using the Phaserunner with my BBSHD. Thanks for the reply though.

[@MonMalthias]

"A bit of extra power compared to E-MTB" E-MTBs are like 500W lol so it's more like 10x the power

[@evolutionpowerbikes3729]

5000w of peak power with 72v battery

[@evolutionpowerbikes3729]

@@shockadellick hub keeping good done over 1000km no problems but chain will be replaced about 3k km depend on riding and cassette may get 6k km out of it

[@mtblover2560]

Your bike frame is carbon ? I have also Mtb enduro carbon and it’s possible to install it? If yes I’m gonna order one ,thank you

[@what-about-mike83]

@@evolutionpowerbikes3729 you aren't getting those figures from the cassette or chain, i run two bbshd bikes and they are only 48v 1000watt and the amount of torque that transfers to chain and wear is huge, even with a gear shift sensor it causes abnormal wear on the cassette teeth, the chain stretch is amplified due to way more stress, i average a chain cassette every 3-6 months sometimes a little more i do 100miles a month for work travel, around 1200miles a year, add extra miles for day trips, so perhaps 1500miles in total per year. I also live with varying hills, so you might want to revise that replacement scale, it ain't happening.

[@what-about-mike83]

@@mtblover2560 it looks like a carbon frame, overall they are ok but i wouldn't go carbon frame.

[@pawelodz8050]

Wszytko fajnie ale kobra na kwadrat

[@Strange_Brew]

5000 volts!!! That’s 200 mph easy!!

[@hughmongous6613]

5000 volts! That's shocking!!!!😆

[@fkutb]

I've been trying not to laugh because I know nothing about ebikes, motors, controllers, etc, but you guys are hilarious

[@Lardzor]

I believe most chains have a 'master link' that can be removed. I think that might have been a simpler solution than removing the sprocket from the motor. kzbin.info/www/bejne/oGK8e2t-m5KFf80

[@ModernNeandertal]

too many chains. fail

[@osoactive]

5k watts not volts.

[@alphonsotate2982]

5000 WATTS NOT VOLTS MABE 48-52 OR 72 VOLTS

[@evolutionpowerbikes3729]

Sorry it is 5000w is my accent 👍

[@Full_Throttle_no_Brakes]

Remove the motor sprocket was completely unnecessary!!! Just install the motor chain first, then the chainring sprocket on the bike and last the bicycle chain from the cassette

[@dt648]

Power 5000 volts ? Please consult wikipedia before making videos .....

[@johnnymendoza5255]

Before you post another installation video of anything, YOU should watch or consult the PROS on how to install things correctly and properly. SHAME...

[@igotstoknow2]

Evolution Power bikes are intelligently designed, not evolved.

[@magenzie0]

5000 volts .. lol. Power is measured in watts

[@evolutionpowerbikes3729]

It is 5000w (watts) never said volts must be by accent sorry.

[@shabehalre711]

.

[@ZakirKhan-uj1he]

Zakir 1 make for motar price

[@ZakirKhan-uj1he]

Zakir 1 make for motar price

[@ironman8257]

accent de roman

[@Simplyflyit]

5000v... lol , this guy has no idea

[@evolutionpowerbikes3729]

5000W

[@TheHaggisBasher]

pretty sure he does judging by his custom bikes I've seen ripping about my town they are absolute monsters look at the splash page evolutionpowerbike.co.uk/index.html

[@Simplyflyit]

@@TheHaggisBasher money talking...