CZ 457 REVIEW (IN DEPTH REVIEW)

[@romeobravo2023]

Salut Josh, I suspect that for many aspiring PRS shooters you may have just undermined any perceived need they felt they had to invest in a Vudoo rifle. Oh and CZ should make you their US Ambassador. Excellent shooting! Cordialement RB

[@PursuitofAccuracy]

Hi Romeo. Haha the vudoo is still an excellent rifle and shows up on the tops of most leaderboards......but......they are unecessary to be competitive in prs etc. As far as being the US CZ Ambassador. I would be flattered if they ever offered, but would most likely pass on the offer, unless of course I had the freedom to still say a rifle sucked if it did, truly, suck 😁

[@70willard]

What a very informative video . You’ve broke down quite a bit of information for the end user and the first time buyer looking to get into cz rifles. Great job brother.

[@PursuitofAccuracy]

Thanks Willard

[@CobosDoesItAll]

@@PursuitofAccuracy which cz 457 is the base, entry level one?

[@scarbourgeoisie]

Love all of the vids. CZ is my paper plinker of choice as well and have owned numerous 455's and 457's. They shoot as well as my B14R.

[@PursuitofAccuracy]

Awesome, thanks for the comment

[@peterhill1944]

At last! A site that gives the necessary information in an accurate and concise fashion for a perspective buyer of a particular type and brand of firearm. The presentation is very professional and well thought out. The no nonsense fire for accuracy test is also appreciated. I am sure that many of the older shooters like me are fed up with watching pseudo macho type 20 and 30 something hosts blazing away at unseen targets with no tangible accuracy measurements and than telling us how much fun that was. Oh, and then telling us how good the trigger felt to him or how smooth the action was. Very scientific. Thanks again for a gold standard presentation. Count me in as subscribed.

[@PursuitofAccuracy]

Hey Peter. I appreciate the comment and support!

[@johnmartin6804]

Good video. As you know I also shoot the CZ MTR. I also have a CZ 457 VPT. They are every thing you say they are. I would like to have a MTR barrel for the VPT ,it was not an option when I got the gun.

[@clivenewton7609]

Hi Josh! New subscriber after watching this video, much appreciated. Picked up new Tikka T1X yesterday 😂😂 but I do have a space for another .22lr on my U.K. firearms certificate which will be filled with a 457 in due course. Many thanks for all your hard work bringing us these first class and informative videos. Regards from deepest Dorset England 🇬🇧🇺🇸

[@PursuitofAccuracy]

Thanks a lot Clive! Sounds like you will have a great .22lr setup

[@davidbundesen5867]

I did not know that these rifles were available in 17 HMR. That’s great to know. Love your videos. I watched most of them. Or at least most of the ones on the CZ. Keep it up.

[@cmndo9741]

Nice review, Josh. Very informative. Wish I had this information when I was looking at CZ's a couple of years ago. Thanks.

[@PursuitofAccuracy]

Thanks Cmdo97

[@timrink256]

Thanks for the input. I've been very impressed by the performance you've gotten out your CZ's.

[@PursuitofAccuracy]

Thanks Tim

[@Errol.C-nz]

@@PursuitofAccuracy found your post ive been looking for.. i have a 1983 Krico 400s silhouette full match x-nz champs club day rifle ive had for 18yrs now but not shot much.. have a Thompson Sliver Lynx semi auto for rabbit sport, has a stock match heavy barrel with a horrible trigger & even worse gunsmith threaded suppressor Im selling to get (now) a 457 setup for some retirement yrs fun shooting.. not been a range shooter till now, just deer shooting a bsa 270.. id be interested to know what the 457 match barrel was like & more about the barrel youve fitted & why.. best regards for the newyear, from NZ

[@johnhermsen6456]

I have a timny trigger on my 455 special edition yellow black and its a perfect trigger I love it

[@PursuitofAccuracy]

The timneys are nice triggers

[@YotaDaryl]

Just got into precision rimfire and absolutely love this channel. So much info

[@PursuitofAccuracy]

Thanks!

[@visiter127]

Great vid again, running a cz455 at the min for plinking and rabbits picking up the 457 this week for some long fmramge,

[@PursuitofAccuracy]

Awesome, I appreciate the coment. 455 is a great rifle too

[@visiter127]

@@PursuitofAccuracy it's very accurate but bolt isn't as good, have had it getting very tight after a few shots

[@brassteeth3355]

Thanks for the insight. There's a lot of information to consider regarding these 22s.

[@richardlawton1023]

Very nice. I'm using the Bergara b14 r carbon fiber. With a Timminy Custom Calvin Elite trigger set at 8 oz. And a few other mods.

[@scottrhoads593]

Another great video, my cz and bergara shoot neck and neck with the same sk family of ammo. It's been fun for me to enjoy both platforms. The cz is in an MDT chassis and the bergara is factory stocked with a timnney trigger.

[@PursuitofAccuracy]

The bergara is a very nice rifle. Both great options for the money

[@danielmastrangelo3778]

I have a cz457 varmint which was my first rifle, 30moa 419 rail and its been great, my 12yo daughter loves shooting it. I however picked up a b14r, MPA chassis and im sold on the 700 platform. My bergara is maybe 5% more accurate but it's also a better fit for me. Having said that, the cz more than holds its own and in many cases the difference between them is reading the wind more than any inherent accuracy difference. Love the videos mate 👍

[@PursuitofAccuracy]

Thanks Daniel. The B14 is a great rifle

[@johnmal801]

Just got mine. Now its learning time. Thanks for the video.

[@Dwayne7834]

Thanks for the video and information. I finally got some 10 round magazines for my MTR. After looking for 5 months.

[@PursuitofAccuracy]

Awesome....i know lots of people cant get their hands on them

[@Dwayne7834]

@@PursuitofAccuracy Definitely hard to find Got on several notification list .

[@terrykleypas50]

Another great video. Thanks Josh

[@PursuitofAccuracy]

Thanks Terry

[@tommcfarland5368]

I bought the 457 atone...I wanted the manners-stock version, but couldn't front the shekels for it. Ended up sponge painting and clear-coating the atone stock and it looks exactly like manners' moss camo, except no carbon fiber. I love these rifles. Mine loves fiochii exacta winter. Under one minute gun all day. Thanks for your videos

[@markthibault8579]

Great overview. Well done.

[@PursuitofAccuracy]

Thanks Mark

[@Cristopher1976]

This rifle started my addiction to the 457. I wish they still made the orange color way.. I wish you still had this one.

[@richfreeman739]

Excellent video full of great information.

[@PursuitofAccuracy]

Thanks Rich

[@dieseld5129]

Nice video and good information for someone looking to buy a cz!

[@PursuitofAccuracy]

Thanks Diesel. You went missing for a while brother, glad to see your back!

[@rogerfiala4862]

EXCELLENT SHOOTING AND VIDEO

[@darcher5888]

Gotta have! Your content and videos are outstanding! Thank you!

[@PursuitofAccuracy]

Thanks

[@Natezoinks]

Love my CZ 457 VPTMTR, great gun.

[@PursuitofAccuracy]

Yeah got to love a good rimfire

[@Natezoinks]

@@PursuitofAccuracy I’m keeping mine factory for my first season of NRL22, then I might go crazy with it. Only change inside was the YoDave spring (set @ 1 lbs). Topped it off with a Leupold Mark 4, and a Harris bi-pod. Doing well so far, pulled a 410 at the last match. 👍🏻

[@maretrushbrook9666]

Great vid .Ordered a 457MTR and got a call from gunshop it had arrived . Here in Australia I can,t get my hands on a AREA419 bolt knob ,but may have to with that ..JR

[@thegriff9425]

Yes, they are available here. I just picked one up. Google it and you will find the supplier.

[@jerrysnyder9388]

Got to get me one. Thanks

[@Superposed1963]

Excellent video! Very helpful information and good advice. Like all your vids. Keep up the good work!

[@Docsporseen1]

I should have my 20" Thumbhole Varmint rifle in in the next few days. I am really looking forward to running it against my Tikka T1x.

[@richardmattix5322]

I love the accuracy

[@PursuitofAccuracy]

Thanks Richard

[@p47rr]

I have CZ 455 trainer with a Manners stock. EGW 20 MOA scope rail, 1.5 lbs. trigger spring , Leupold medium height Mark 4 scope rings, Glades bolt knob and a Arken 6-24X50 rifle scope. It’s a blast to shoot. I really prefer a Manners stock instead of a chassis.

[@PursuitofAccuracy]

Yeah i love the manners stock

[@leedavis6629]

Great info !!

[@PursuitofAccuracy]

Thanks

[@bobheale2521]

Eagerly awaiting your tikka t1x review, hopefully you can compare it to the 457 sometime

[@Bassboy123]

Nice review 👌🏻👍🏻

[@PursuitofAccuracy]

Thanks

[@rudedawg5087]

I have 2 Varmint MTR's and they are the most accurate rimfire rifles I've ever owned, period. I need a new light weight carry squirrel rifle and wish you would review the CZ457 synthetic 20" as I trust your honest and straight forward reviews. Thanks.

[@macriddle]

Sorry if you covered this. I scanned to see but didn’t find anything on your choice of cheek risers. I have the the same stock as yours in the video but am looking for a riser. Thanks and great video. Mitch

[@PursuitofAccuracy]

Its a victor titan cheek riser. Really affordable and does the job but you need to double side tape it on or screw into your stock

[@macriddle]

@@PursuitofAccuracy thanks for the reply. I took a wild guess that was the one that was and had already ordered it before you confirmed it. Thanks a bunch looking forward to getting out in Shooting my 457 for the first time this weekend if I can figure out how to upload a picture I would love your opinion thank you

[@PursuitofAccuracy]

@@macriddle best way is to email me [e-mail]

[@RW-ur7ym]

Josh, excellent video thanks for putting in together. I read somewhere that the standard barrel 457 is less finicky about ammo than the MTR variant. Do you agree with that?

[@PursuitofAccuracy]

No i havent seen that

[@moonray1276]

Nice review and well done to everyone commenting how good their CZ is. I bought one new in 17hmr and it's rubbish. If you like light strikes and failed detonations with winchester, hornady and federal rounds then go ahead. CZ are of little assistance. Recommending polishing the firing pin so that it travels smoothly in the bolt. My question would be why would it not do that before it leaves the factory. My suggestion is avoid it.

[@PursuitofAccuracy]

Interesting. I own 2 currently and have owned 5-6 and all of my 457's have been extremely reliable

[@moonray1276]

@@PursuitofAccuracy I'm happy for everybody that's enjoying their CZ. All the reviews say they're excellent. That's why I bought one. Extremely disappointed though. My gun dealer has promised to put it right but CZ's response was short and unhelpful. Bring it to a cz supplier gunsmith for repair basically was their advice. It's a new rifle not a 2nd hand scrapper. If it's not an easy remedy it'll be going back and I won't be replacing it with a CZ. I'm open to suggestions on alternatives.

[@mrzip31]

Great youtube reviews, Love the cz 457 and getting ready to buy a cz 457 mtr. What barrel length do you think is best for 100 yrd shooting or 150 max

[@PursuitofAccuracy]

Im liking longer barrels lately. 20" - 25"

[@shelley131]

Been loving your videos and especially love this one. I use a 52C up to 200 yards with the Redfield sights and am thinking of buying the 457 CZ. Two questions, in your experience is there a specific barrel length that you would stick too and secondly since I am limited to 300 yards distance will the 30 moa mount be ideal for 50 to 300 yards or do I need the 15 moa to be able to dial down to 25 and 50 yards.

[@PursuitofAccuracy]

30 moa should be fine. I prefer to be 20-24" in barrel length.

[@michaelyost7642]

Great video. Just ordered the 457 MTR. What sunshade are you running on your optics?

[@PursuitofAccuracy]

Im running athlon optics and athlon sunshades

[@chrismiller8214]

Hello Josh. Thanks for the video. My question is this. Given the fact that I will likely never "compete" in a sanctioned NRL 22 competition and that my primary use of the CZ 457 would be for hunting/plinking, am I totally "off base" to consider the CZ 457 VPT (standard chamber in the Manner's camo stock) as a viable/bit more economical option? I don't mind spending good money for a quality product, yet I don't like wasting money either...lol I really like the concept of the Manner's stock with it's inherent stability and the fact it has aluminum pillars to secure the action. Your thoughts.

[@PursuitofAccuracy]

The manners is a great stock and I would enjoy it as much for plinking as i do competition

[@biagiocozza8875]

Great video Josh I have a regular MTR, and like to shoot PRS with it. My Arca rail is on the way, I have a nice Vortex scope with a 419 25 moa rail. Now my question, I really like that trainer stock, where can I get one? Great job Josh

[@greg-judyjones8974]

Nice video. Enjoyed the ammo tests. Love my 457 Chassis. What optic please?

[@PursuitofAccuracy]

Im running the athlon helos btr gen 2 and the athlon cronus btr gen 2

[@VictorMarines06]

@@PursuitofAccuracy If you shared this already, I missed it. What bipod setup are you using in this video?

[@PursuitofAccuracy]

@@VictorMarines06 its an Atlas bt46 with a rrs arca clamp

[@dontamad8600]

I really love your review… im planning to get a cz 457 for precision and seldom im going to used it for hunting… what can you recommend in terms of stock and barrel?

[@PursuitofAccuracy]

Whatever stock you like and a lilja barrel

[@charliesiempelkamp511]

I enjoy all your videos. I bought the CZ 457 LRP. 2nd time out with the gun, my daughter and I started to get some good groups with it. I have a question. What is the material you have fixed to both guns' stocks about where the magazine is inserted, and why ? Is that to help you locate the mag well? Or is it for some other purpose? Thanks.

[@PursuitofAccuracy]

The nylon material on the side of the stocks is a spare mag holder. The metal on the bottom is an arca swiss rail for bipods and plates

[@P2thaG]

Hi there, great video. Just ordered one based on your review. Forgive me if you mentioned it, but could tell me what arca rail you're using?

[@PursuitofAccuracy]

Hey Paul. I am using the area 419 14" universal weighted arca rail

[@P2thaG]

@@PursuitofAccuracy Thank you for taking the time to reply :-)

[@ronbimeal8341]

Hey Josh I have a rem. 40x short action do you know where I could find someone to help me re barrel it and build a gun like you have, since I already own this I figured I would be able to save a little money and invest in a better scope, but I don’t have a problem buying and building up a Cz any suggestions thanks Ron

[@ShooterB1]

You said everything perfectly. The only thing you left out is CZ is King at everything they do. Past 2 years have tinking with the 457. I have CZ pistols for more than 10 years. Few I have added Cajun part to. First 457 was the walnut Varmint. Most beautiful stock ever made. In the last 3 month picked up the Manners MTR trainer and swapped out barrel ro Lilja. I started head space at .041. Groups wasn't the best then went down to .039 shimmed with a. 003 shim. Getting better. Only have 50 rounds on this HS. No hard bolt close. Can't even feel the engaging the rifling. Would you try closing the head space more if doesn't group? MTR chamber feeld a lot tighter than Lilja.

[@PursuitofAccuracy]

Yeah you can decrease headspace until it becomes tight at lockup

[@ShooterB1]

@@PursuitofAccuracy I hope I can get it tight. I am at .003 shim.

[@dougrybarczyk4449]

Are the barrels screw in like centerfires?

[@randeefisher1143]

Do you have a build video on this rifle? Where can I find out what parts/scope your using?

[@dmalcolm24]

2nd viewing of this video. I have a 455 Varmint in 22lr. I've already installed a Timney trigger. Are there any reasons, except the 60 degree bolt, that I couldn't build up a pretty good facsimile of the 457 MTR, using my 455 and a Lilja barrel & Boyd stock?

[@jeffstanfield5070]

Josh, may have missed it in a video. But what is the hole in the forend side of your MTR Varmint ?

[@PursuitofAccuracy]

Its a qd socket for a sling

[@treybraswell6310]

Does the cheek riser that you have get in the way of your bore guide or cleaning rod?

[@PursuitofAccuracy]

Yes it does

[@treybraswell6310]

Awesome thanks! Love you vids very informative and helpful keep up the good work!

[@dennisd157]

I just purchased my 457. I am trying to setup my rifle up similar to yours. What is the brand and model of your bipod and scope. I purchased timney trigger, waiting for it to arrive. Thanks

[@DSmith-zf9es]

Hey Josh, as always your video content is superb. Q: What is the length of that new stainless steel barrel? I want 200, 300 yard accuracy, do I need longer than 16"?? Thanks! Dave

[@PursuitofAccuracy]

The barrel is a lilja. I would go for a 18" or so yo get the most velocity you can get so you wont have to dial so much at those distsnces.

[@DSmith-zf9es]

@@PursuitofAccuracy Great, thanks for the quick response Josh!

[@PursuitofAccuracy]

No problem

[@billpoynter108]

What cheek piece in on the manners stock?

[@asanta5390]

Have you tried a IBI barrel???

[@PursuitofAccuracy]

Yes on both the 457 and b14r

[@thegriff9425]

Can you tell us more about the custom barrel and shim setup please. And how much more accurate is it over the stock barrel?

[@PursuitofAccuracy]

The lilja had been more accurate for me than the mtr or standard cz barrels but not by a ton. On the channel i actually have a video just on setting the headspace with the lilja if you want to check it out. There is also a lilja barrel review video

[@thegriff9425]

@@PursuitofAccuracy thanks. I’ll check it out. I have a MTR on order and a MTD XRS chassis coming.

[@desabc221]

Couple of questions. I have a stock factory CZ MTR. I notice you have a rail on yours. What 30mm rings with a 52mm objective do you suggest? I have high rings which are too high. Midway sell these medium height especially for the MTR. Any comment? Also no one has the 10 round magazines except eBay for $70. BTW excellent videos!! I shoot a lot of center fire but you have me sorting RWS MATCH ammo now and I do like testing stuff!! Thank you.

[@PursuitofAccuracy]

If your running a rail like mine low rings are fine. No rail i would go with a medium

[@desabc221]

That was a quick reply!! Sorry just watched another of your videos and you describe exactly what you are running. Scope, base and rings!!! Probably frustrating for you…

[@PursuitofAccuracy]

@@desabc221 no totally fine. Im here to connect with shooters and hopefully spread information and increase participation in the shooting sports

[@mariogaudiomonte5866]

Would you recommend bedding if used in a Boyd's stock ?

[@PursuitofAccuracy]

Yes definitely

[@071Tom]

Quick question. What is the Velcro on the side of your rifle for and why the sandpaper on your sunshade?

[@PursuitofAccuracy]

The velcro is for a spare mag holder. The grip tape is a good place to grab in certain positions to steady the rifle. It also protects the finish on the sun shade from getting scraped up.

[@071Tom]

Very cool, I'll have to try both out

[@mikegardner9449]

I just purchased a MTR. It will shoot .2 and .3 groups at 50yrds. But right next to the .2 group I'll throw a .85. I'm shooting sk std and rifle match. I don't get. Are others scratching their heads with similar results?

[@ronmartblog]

The Sako Quad definitely competes but it’s significantly more expensive with less aftermarket support

[@PursuitofAccuracy]

Hey Ron. Yeah i always forget about the sako quad.

[@albaneincowboy183]

I finally got my rail from Triggers BScar and my scope set up on my Varmint MTR. I’m planning on sitting it in this weekend. I’ve read that people change the torque settings on their action screws. Usually between 25-35 in lbs. What do you have for yours?

[@PursuitofAccuracy]

I ran 30 in lbs on the mtr stock and 40 in lbs on my manners

[@albaneincowboy183]

@@PursuitofAccuracy thank you kindly

[@CZz59]

I injoy your CZ 457 videos... I have a 419 -30 on my 457. Easy to hit sub m o a @ 300 yard... Question... Where did you get the cheek rest??? AND ... Where do you buy ammo SK, Ely, Midas...??? Thanks 👍😊 🇨🇿🇮🇱🇺🇲🏁

[@PursuitofAccuracy]

Thats dang good getting sub moa at 300 yards. The cheek rest is a victor titan i got online. Ammo i buy from goodshooting inc, lapua test center, or champions choice

[@CZz59]

@@PursuitofAccuracy hey... Thanks for sharing. It's easy to hit a 12"x12" steel plate... But I have 2.5" at 300 yard's 5 shots... " should read 12x12 steel plate... Thanks again...

[@CZz59]

Dear Sr Got the Victor... Got ammo ELEY and Midas Center X... Where did you get your cheat sheet with Velcro that catches to your scope? Will Brown... Needed for club shooting in Arizona. Old shooter... Thanks...

[@stephenporter4059]

CZ 457 At-one model - it states Match chamber on website but isn’t listed as MTR - after watching video - can anyone confirm if the At-one is a MTR barrel or not ? Thanks for the great videos and Info on this channel 👍🏻

[@timarnold2070]

I have the cz at 1 and I can assure you it is not a mtr barrel 😕

[@PursuitofAccuracy]

Yeah the at one has a standard barrel with it. My daughter shoots the 16" at one and its a standard barrel model

[@jck197]

What magazines do you recommend for the 457 variant?

[@ShooterB1]

Do you shoot over a chronograph to check SD and ES or just shoot whatever shoots best? I know in center fire I have seen bad groups at 100 but great groups at long distance. Have you ever come across this with 22lr ammo?

[@PursuitofAccuracy]

I do when im trying to find my competition ammo. I usually narrow down by sd's then pick the best groups. The lower sd's help a lot with the longer range targets

[@handymandisco3025]

Is that the the stock receiver and action in your comp gun?

[@PursuitofAccuracy]

Yes it is

[@BigTimberLodge]

I absolutely love my CZ 457 ProVarmint, but mine is factory stock. I found mine loves RWS Rifle Match ammo. Have you tried it? I shot my best 5 round group at .266" at 50yards. You can see that group on my channel. I love your videos and subscribed.

[@jimmccaffery410]

Hey Bud, I saw in one of your newer videos that you were torquing the barrel grub screws to 50 inch/lbs. On the CZ video it says 5.5 Nm . That’s 48.6 inch lbs. If you ask CZ tech support by phone they say 35 inch lbs. It wasn’t an issue with me until my hex driver snapped off! Maybe you have the resources to find out what the real torque spec is. Question: what is that black thing in front of your magazine?

[@PursuitofAccuracy]

I will see if i can find something out. I think thats the area 419 arca swiss rail your referring to.

[@visiter127]

I just got a new barrel from cz I'm in Europe and it's printed 44 inch points on barrel grunb screws

[@jerryking3208]

The black thing looks like it is corduroy and Velcro??

[@jimmccaffery410]

@@PursuitofAccuracy The question about the black thing in front of your magazine, I agree with Jerry King, looks like a strap, no idea what it would hold, that’s why I’m asking.

[@PursuitofAccuracy]

@@jimmccaffery410 Oooohhhh got ya. That is the short action precision mag holder. During prs matches i keep a spare mag there in case i need extra ammo on the stage

[@fujimatosa]

Hi. What about accuracy from the box? I was expecting you will shoot some groupes with it. Also do you about CZ 457 LRP? What is better 457 LRP vs 457 MTR???

[@PursuitofAccuracy]

Out of the box the cz is also very good. The actions are all the same. The lrp and the mtr have match chambers so accuracy should be similar

[@fujimatosa]

@@PursuitofAccuracy Thank you very much. What about if compare tikka t1x MTR vs CZ 457 MTR, out of the box? I like both of them, but can buy only one of them.

[@PursuitofAccuracy]

@@fujimatosa honestly both are good guns. The tikkas are harder to find and both will come down to finding ammo they like. I prefer the cz over the tikka but its just a personal preference

[@fujimatosa]

@@PursuitofAccuracy Thnk you very much. So I will buy what ever I will able to find.

[@lastboyscout2950]

I just wish the CZ Manners stock had a adjustable LOP and cheek piece. Missed opportunity.

[@PursuitofAccuracy]

Yeah i agree.....manners will add an adjudtable cheek piece to your manners stock for a few hundred

[@simonfingrhut5713]

The 457 Lrp allready comes with a cheek piece straight from the factory.

[@bryand3276]

@@PursuitofAccuracy what cheek riser do you have your manners in this video?

[@danielbloom9481]

Sure wish we could get the stainless cz barrel in U.S.

[@PursuitofAccuracy]

The stainless barrel is a lilja

[@leecollins4796]

The question is MOA or Mrad. I'm only shooting a cz457 MTR with a Lija barrel at 50-100 yards. A friend who very knowledgeable keeps telling me that Mrad isn't as good/accurate as MOA at those distances. I'm upgrading my Mrad scope but he tells me that I should get a MOA scope this time. Thank you for any replies.

[@PursuitofAccuracy]

Its just a preference. A typical moa scope is 1/4 clicks so its roughly quarter inch per click at 100. Mrad is 3.6" for 1 mrad at 100. So .36" per click. Not much of a difference

[@leecollins4796]

@@PursuitofAccuracy Thank you.

[@kentdavis7438]

Have you had a chance to shoot the CZ long range precision? I know the big difference is the stock, and the CZ 25 moa rail system. I would like to hear your opinion.

[@PursuitofAccuracy]

I have not got to shoot it yet. Its definitely on the short list

[@kentdavis7438]

@@PursuitofAccuracy I hope you can do a video review on the lrp when you get around to shooting it.

[@PursuitofAccuracy]

@@kentdavis7438 i just need to find one i can get my hands on

[@kentdavis7438]

@@PursuitofAccuracy they are kind of hard to come by. It took me 6 months to find one. How do you normally get the guns you review?

[@PursuitofAccuracy]

@@kentdavis7438 generally my friends own a lot of the rifles i review. I have a good group of friends who are very competitive so they own a lot of nice rifles. The cz 457's I own

[@coyote91mbfv28]

I own a CZ 452 varmint that I have own for years it's a tack driver what's your take on the difference from then to now

[@PursuitofAccuracy]

Honestly my cz experience started with a 455. I have not had any experience with the 452

[@coyote91mbfv28]

@@PursuitofAccuracy copy that I stuck with it because I believe the barrel is press in or is threaded. In my old school thoughts should be more precise not sure if that logic stands. But shoots sub 1" groups at 100 with a 4x12 scope vortex and taken squirrels out to 70yds. Would love to see a channel do an in depth review of the 452 to see how the tech has changed.

[@miloslavslehubr119]

👍.

[@grasunmajjurach6026]

Verygood i from thailand พัทลุง

[@lewisrice3741]

Josh would you have any idea where I could get top of the line cz457 varmint trainer mtr with manners stock and match chamber your help would be appreciated watch and like all your videos. Beagleman

[@PursuitofAccuracy]

Local gun shops are your best bet

[@FeWolf]

what do you thimk of the non MTRs?

[@PursuitofAccuracy]

They are great too

[@FeWolf]

@@PursuitofAccuracy I am looking at picking up a 457 synthetic stock model on 22wmr, I have a small 22wmr collection of firearms and looking to introduce my grandson into world of sport shooting, thank you for your reply.

[@dmc3199]

What bipod do you use

[@PursuitofAccuracy]

Atlas

[@jerryking3208]

Does anyone offer a longer than 20 inch mtr barrel for the cz 457? Have the 17hmr in the Boyd’s stock to play with. Great info and thanks.

[@PursuitofAccuracy]

I dont think the mtr come longer than 20" but they make some standard barrels in 24"

[@sc6802]

Lilja

[@blub646]

What ist the best Barrel length for accuracy?

[@PursuitofAccuracy]

I prefer a 18"

[@dennishoffman3531]

What chasic would you recommend for 457

[@PursuitofAccuracy]

For a stock, manners For a chassis, whatever you prefer really

[@Plainsimple67]

Hi, is your scope MOA or Mil-Mil?

[@PursuitofAccuracy]

Mil mil

[@Plainsimple67]

@@PursuitofAccuracy 👍Tnx.

[@PursuitofAccuracy]

@@Plainsimple67 np

[@visiter127]

What's the cheak rier please

[@90civicsir]

Victor Company Titan 1022 cheek riser

[@anthonykhalil70]

Did you replace your bottom metal to a one peice????

[@PursuitofAccuracy]

Both are factory bottom metals

[@jimmymarksberry]

What model atlas bipod is that?

[@PursuitofAccuracy]

Atlas bt46

[@jimmymarksberry]

@@PursuitofAccuracy thank you! I’m in the process of glass bedding my cz455, and I still need a bipod. It was already pillar bedded and I just got a vortex venom for it

[@PursuitofAccuracy]

@@jimmymarksberry nice. Sounds like your making a great rifle platform

[@jimmymarksberry]

@@PursuitofAccuracy thanks, means a lot coming from you

[@DR.DREAD1984]

can you spell out that trigger you talked about. it sounded like :yoday"

[@PursuitofAccuracy]

Yodave

[@mefirst5427]

With my CZ 457 Varmint model, 50 yards is too easy and boring. I take it out to 100 yards outdoors in windy conditions, that is a real challenge to get 1.5 inch groups.

[@jonleone777]

I want so bad bug im left handed. Not sure why they dont or wong make a lefty.

[@stevog4422]

You don’t happen to have a brother named Sebastian, do you? 😎

[@PursuitofAccuracy]

No sir lol

[@matthewrezuke8130]

Makes me want to sell the vudoo.

[@PursuitofAccuracy]

Haha wouldnt go that far