CZ P-07 Complete Disassembly/Reassembly

[@craigroberts6439]

Great video….my takeaway here is that I don’t ever want to take my P-07 apart.

[@bierlyynn]

@Brad-cs9jy you plan on swapping a striker in the field?

[@bierlyynn]

@Brad-cs9jy I get your rationale, I do like how easy it is to disassemble my Glock too. I'd still take my P-07 to war over any other handgun I've ever shot. Quality is more important to me than something like that, not to say that my Glock isn't quality but it's had numerous malfunctions compared to the 0 in 5k+ rounds that my P-07 has gone through.

[@DrewishAF]

This is exactly why you should be highly skeptical of anyone that says they're experienced with working on pistols when nearly everything they've done was with Glocks. If you don't know what I'm talking about, watch this video and then watch one of a complete takedown of any Glock pistol. Those guns have about 1/3 of the parts and pretty much any half-wit can take them down. 😆 Great video. I downloaded it and subbed for reference. Thank you for the information.

[@JD-tn5lz]

Great video. I used it to help me install an ejector into my P07 that I purchased from CGW. The P07 had a trigger job done by CGW, and they neglected (forgot) to re-install the ejector. They were a pain to deal with and I had the impression they didn't believe me. Rather than deal with them and shipping it back and forth, it was easier to just say "to hell with them" and do it myself. Oddly enough, when I do a trigger job on any firearm, I always live fire to test it before I declare it complete. Horrible experience with Cajun Gun Works.

[@brandonUwanawich954]

Thanks bro watched the whole video once and did a complete trigger job on my p07 appreciate the video sir

[@willo7734]

Thanks a lot for this. You made swapping out my springs and firing pin extremely easy. A++ would disassemble again.

[@jtroutt19]

Fantastic video my guy. My p07 got really dirty the other with a bunch of fine dirt and sand. I need to completely disassemble to clean this video help tremendously! Thank you!

[@TheBigman603]

I have to replace my firing pin on mine (mainly the springs) however parts for the p07 are getting harder and harder to find. I loved the video and have it saved for when I finally have some time. Thanks bud!

[@JavTheJackal]

Very cool video. Learned plenty. I have a P07 and just upgraded all internals, hammer and trigger. Adjustable trigger, It dropped a couple pounds and feels great! Thanks for sharing man! Great stuff!!!

[@stillwaterbuilders3714]

Do you use your cz p07 for carry, or range? My p07s trigger is like 6 lb double and a 1.5 lbs single from the factory.

[@korygarrison4337]

I now appreciate how simple it is to detail strip my glocks.

[@jimfarmersr4082]

This video help me put back together my son po9 .

[@fazakg]

Thanks for the helpful video...💪 Greetings from Poland

[@miketabback2635]

Great job and thanks I watched it 2 times already. I have a friend that owns a P-07 and I know at some point he will ask me to do something and now I am ready (I hope) LOL

[@TheGunBench]

Well once you do one of these then you’ll know how to do the p01 omega, p09 and have a good idea to get started on other CZs. Good luck to you let me know how it goes! Have a few other CZ videos posted too you can reference for future endeavors

[@danjf1]

Im liking the p07 - it seems pretty ambi friendly

[@abnercarrera]

Does it matter from which side you remove or install the firing pin block ?

[@samv7407]

I hope you can make a safety SP01 and a P01 decocker video like this. Perfect video. Thank you.

[@AMXSShirt]

Good work

[@RHG48]

Very helpful, thank you!

[@danahowerton9638]

Thanks for the video

[@95ZR580]

Proof that glocks really are simplistic

[@Voojina]

My firing pin is broken and won’t come out what should I do

[@tomashradil3994]

Thanks bunch ♥

[@abdullahmustafa3572]

Which pins go where you not showing

[@ВолодимирВасилюк-н2й]

Дякую,просто супер

[@NCEngravers]

Great video.

[@TheGunBench]

Thank you!

[@S2BYISRAEL]

The spring that is inside the pistol grip of the gun keeps coming out while shooting and leading to light primer strikes anyone have recommendations as to why that could be happening?

[@nicknenadovic]

Great video!

[@TheGunBench]

Thank you!

[@fosty.]

Hey, we're using the same hammer.

[@ddthree]

Thanks much for the video; very helpful. The trigger on my P07 was not resetting but only when in double action . Thinking it might be the trigger reset spring so I installed the CGW complete spring kit. This did not help and it will still not completely reset . The double action reset is literally a few millimeters from finalizing. If I pull the trigger back and let it loose the additional momentum resets it. Called CGW and they suggested polishing the dis-connector. The trigger resets in double action normally without the slide on. Any thoughts you might have would be appreciated. Thanks again for all of your videos.

[@BJJ-SHOOTER-HUNTER-BASSIST]

Congrats for your video. To make a light trigger, what I have to do?

[@samneely6439]

I have one question I am ordering the cajun gun works pro grade kit what size roller did you get thanks Sam

[@civilian0005]

Can the hammer be removed without removing the sear and decocker and etc?

[@daltonrumbarger2701]

Do you use a roll pin punch to knock out the firing pin retainer pin?

[@StewieStew820]

I personally would like to see the pro kit upgrade

[@mellifont96]

FYI Cajun gun works said there was no reason to take out the steel inserts.

[@ipstacks11]

Where do you get the slave pins from? What diameter and length are they?

[@stephenpetrikowski3009]

Hey man after I reassembled my p07 the trigger feels kind of funny. Almost like a loose squeaky feel. Everything's stock it just doesn't feel the same as before. Do you know what's wrong?

[@stefanc3792]

Where can a guy pick up a trigger bar spring? It like they can't be replaced in North America..

[@jimmyharpe6686]

Thanks for taking the time to make such a complete video. Question: I had my LGS giunsmith install a CGW pro-kit for me and noticed a couple of things. One, when I depress my decocker there appears to be a very slight gap between the inner face of the decocker and the outside face of the frame - just noticeable on my thumb when I decock the hammer. The second thing is that the lifter can be easily wiggled; I would have thought it would be fairly tight. I took it out for the first time since the CGW kit installation and no issues - it's just the two things that bug me that I've mentioned. Are these two things that I mentioned normal (and I just never noticed) or does sound like I need to have a tweak to the CGS installation? Thanks in advance for the response.

[@woofymodder]

Let’s say u forgot to put the spring on the firing block, what would it affect?

[@ForgottenNitro]

I recently purchased one of these firearms and cant get the main spring pin out from the grip for my life. Already banged the pin to hell and tried applying pressure on the spring plug. Any suggestions?

[@philippott2784]

Dont cock the hammer as this will compress the spring and make it harder. Usually you just need to push in the plug half a millimeter (on other CZs) to relieve the pressure on the pin and then you can push it out sideways with a tool easily. It really goes without much force or hammering the pin! Only thing that comes to my mind is the plug could slightly be turned and not just put vertical pressure on the pin, but also sideways. Maybe a drop of some creeping oil on both sides of the pin will help to lighten it...

[@sosilverraider7119]

I’d be real interested in your advice I’m lookin for a pistol to protect my family I’m split between Glock and CZ. The Glock seems it’d be much easier to maintain but the Cz more accurate, ergonomic, more features. What would you recommend if it’s only one?

[@TheGunBench]

Can’t go wrong with both if you plan on doing a bunch of add ons to the gun then Glock may be the way to go. Glock has the longer track record but the p10 has been doing really well since it’s release. I prefer the m&p 2.0 compact that’s what I edc. I’d go try to shoot a few of them and see what you shoot better because both of them will give you the reliability you need. At that point it’s preference for the shooter

[@brandonUwanawich954]

CZ P07 > Glock 19 I own both yea glock mags are every where but the P07 is just the superior gun with the better trigger and looks way better

[@MagicianMarcus]

What is the last pin you removed from the gun frame called? Mines keeps inching out after shooting awhile. I wanna replace it.

[@TheGunBench]

The hammer pin? If not check this link, find the pin and call CZ custom trll them the number and they should have them czcustom.com/cz-parts-all/p07-p09-parts-from-diagram/p07-diagram.html

[@radioanglolatina]

Hi, Where did you buy the grip protector?

[@sooperserved]

Talon grips

[@radioanglolatina]

@@sooperserved hello, do you remember which model it is?, 4 options appear, thanks

[@jamescarter4175]

Very interesting. Thanks! How did you learn all of that?

[@TheGunBench]

Honestly.. just doing it. Started taking guns apart and you eventually start to learn how different components work with each other. Once you understand how inner components work it every gun gets easier and easier. Especially CZs, once you learn say the p07 well then you can do the p01, then a regular 75 decocker or omega, shadows with safeties only, they all work very similar. One good tip is taking pictures during your tear down, that’s helped me tremendously multiple times. Get the parts diagrams for each gun online and keep a binder or a file of them. That helps a lot too.

[@jamescarter4175]

@@TheGunBench It's clear that you have a deep interest in this. Thanks for sharing your information.

[@MrMajintiger]

just curious what state did you buy this in i had one that the decocker would wobble i sold

[@TheGunBench]

Indiana

[@MrMajintiger]

@@TheGunBench it sounded like it could have been my problem. when you pulled the trigger did your decocker walk out? how did you actually identify lol or would it not even shoot? nice video by the way wish it was out then

[@TheGunBench]

I took the slide off and noticed the spring just sitting there. I am pretty versed in cz internals so once I saw it I knew what had happened . But it would also kinda walk out if you pull the trigger

[@MrMajintiger]

@@TheGunBench interesting i cant quite remember. i polished the internals and after it would do that. i was careful i thought. just did a p01 with cgw went alot better. still regret getting rid of the p07 though always wondered what i was missing. thanks for the reply

[@MrMajintiger]

@@TheGunBench whats your favorite cz so far?

[@Endorphins27]

Good vid. Could be closer up

[@Fullflex4X4]

Really wish I knew which pins you were using for what lmao

[@fosty.]

Poor tip: if you have no punches, use your firing pin.

[@TheGunBench]

Or old drill bits, just cut the shank off and use that. Most people have an old set of multiple sizes. I use them to make slave pins

[@haywoodjablome44]

Not a chance in hell would I attempt any of that.

[@mikeoxlong3676]

I hope mine never breaks because fuuuuuuck that. My Glock is so simple to work on. But my CZ feels better to shoot.

[@fosty.]

I hate this gun!

[@TheBigman603]

I have to replace my firing pin on mine (mainly the springs) however parts for the p07 are getting harder and harder to find. I loved the video and have it saved for when I finally have some time. Thanks bud!