CZ P-07 wear points after 1,000 rounds

[@toynazi]

I just ordered the OD green model. Comes with night sights out of the box. That was a big plus. Can't wait to get my paws on it.

[@joseCalderon1976]

Are they real night sights or the ones that have to charge with ambien light? Thanks

[@tltsw]

For a 1000 rounds I don't see wear but seat marks. 2 surfaces meet and mate as one. I own a P07, Glocks, all the M&P Shields and 1 boat Anker Sig

[@dmurda_9mmclips]

Yeah my duty model looks like it has the same finish wear his has

[@garywixson8852]

You keep saying wear & tear repeatedly. That’s not wear & tear, those are mating marks. There is a difference between the two.

[@javierf55]

Great video, this is a gun in the top 5 for many people like me. Any advise on the dry fire procedure? I've seen some videos talking how the pin get broken after some dry firing steps

[@treyjohnson1604]

Buy #83 O rings at Lowe's. It will protect the firing pin.

[@garywixson8852]

Javier Fernandez Use snap caps.

[@mikenagy938]

Just can't understand, with all the problems those cz guns have with the roll pin that you didn't pull it and inspect. You should also have a few extras on hand.

[@vasttrance877]

Look on Amazon I bought 15 roll pins for 10 bucks same exact pin but solid deal

[@marknorwood7521]

@@vasttrance877 solid steel??? Roll pins are "rolled" for a reason. Gives it "spring tension" to keep it where it's supposed to be.

[@glimtecharms5115]

The finish issue was mainly with the PO7 Duty line, not with the PO-7 lime...

[@dmurda_9mmclips]

Yeah I got the duty but the finish wear ain't really bad at all

[@joseCalderon1976]

That shows barely any wear to me. Thanks for the video. I'm thinking about picking up one of these. Maybe. The compact one.

[@PaintedSkyDweller]

I like CZ handguns because the make me a better shooter

[@tobberfutooagain2628]

Hahaha. First time I ever actually saw a person clear a loaded gun on the internet… KZbin gonna ban you for that….. 😂

[@LdidThaT]

Best gun i ever owned

[@stanleystrickland7661]

LdidThaT Same here.

[@Darkslide99]

LdidTthat same here

[@TmanBlades]

@chauncey phillips nothing wrong with it, just make sure the slide is on it

[@MrPYool]

What guns have you owned in the past?

[@xithappens]

@chauncey phillips actually, you're right. This gun is not made for dry-firing and if you call CZ, they'll tell you that. You have to use snap caps or o-rings to dry fire this gun without problems.

[@armedrebellion47]

I have the CZ P07 Duty gen 1 an currently have the Gen 2 on layaway, i never seen so much wear on the inside of a pistol before in my life, my Gosh!! it is reliable, an no malfunctions, i have about 300 rounds thru it so far. I use grease on my Gun's, an i think it would be better for this type of firearm design to use grease instead of oil, the friction is just to severe.. can't wait to get my gen 2 an looking forward to seeing how that runs after 3 hundred rounds. Hopefully the inside wear Mark's aren't to bad..

[@ramsesar2289]

Thanks for the video, I live in Mexico city and my english is badly, but, I want to buy a new gun I have a Glock G25 .380 with 7,500 rounds, but I read in CZ web paga that they use tnifer system in the gun I was thinking that you can not find any wear in your gun, thanks for the video

[@joes9140]

Hello. Can you tell me what the gauge is in the underside of the slide? It's just under the extractor on inside of slide. Mine is doing that too but I can't figure out why

[@lazvt8469]

How often did you clean it...and do you typically leave so much oil in it? Good review.

[@Garcia419x19]

Update on the p07 .... round count? Anything negative?

[@Garcia419x19]

Guns & Stuff I was hoping you had at least 5k through it by now trying to make up my mind between a p07 or another g19

[@kevcom82]

Carlos Garcia I have both. My g19 is my truck gun ever since my p07 purchase. The p07 is such a pleasure at the range. Still love Glock but CZs are great shooters. I understand why they are so popular in shooting competitions. For the price, get the p07.

[@jamesatkins5770]

@@kevcom82 mp

[@javierf55]

That gun is in perfect condition, there is no real wear on it.

[@jamescarter4175]

What about the firing pin retainer pin?

[@davidearl1056]

YOU WIN, NAZI TUBE!

[@jamescarter4175]

@@davidearl1056 I've found that It holds up ok as long as you don't dry fire a lot, and if you do you either use a snap cap or a number 83 rubber o-ring between the hammer and firing pin.

[@jamescarter4175]

Thanks!

[@raymarchetta7551]

Why is there now a pin in the extractor? The previous version did not have this.

[@tsomers01]

It's a loaded chamber indicator.

[@jaydelacruz1099]

How's the Firing pin retaining pin??? P07's Achilles heel

[@davidearl1056]

Yes it is the Achilles heel of the P-07. If I could criticize the people at CZ, I would say that THEY KNOW that dry firing the 07 will damage the gun! So why don't they install a better retainer pin design from the factory? THANKS

[@Swamprowdy]

Not an achilles heel. Just a cz issue that should be remedied. Easy, cheap fix. Quit whining; they are great guns.

[@jaydelacruz1099]

@@Swamprowdy If it's an issue and a major one at that why does CZ not address it in the first place? If as you said it's just an easy and cheap fix.

[@boomaster515]

@@Swamprowdy its a weakness and cz is not doing shit about it fanboy

[@jeffwilliams3436]

⁠@@boomaster515because it’s not really an issue Glock sucker. You can get an upgraded retainer pin for like $5 and it installs in just a few minutes.

[@chrisdavidson3827]

Update on p07 and round count would be nice

[@chrisdavidson3827]

Guns & Stuff appreciate man.

[@mohammadali300]

Guns & Stuff : Shall be awaiting 2000-2500 or 5,000 rounds. All the best.

[@kokarulevic]

This is the first video ever that I had to use the 0.25 speed....