CZ P07/P09/P10 +2 Magazine Base Pad Install by HBI

[@ES3590]

Thank you so much for a clear and concise breakdown of the magazine components. Great video thanks.

[@branislavhlinka3818]

I was really desparate because I couldn’t find out how to diassemble the magazine so I can clean it. For me thumbs up! Really useful video, thanks dude!

[@cs9436]

10 round mags can make use of the +2 extension. To clarify, it will only provide added grip and no increase in capacity. Thank you for your video & making your great products. Keep up the great work!!!

[@TargetAcquisition]

Exactly what I needed to know. Thanks

[@arcad1an292]

Thank you.

[@totenkopfelite88]

Great video, I couldn't figure out how to install it, and there weren't any instructions, this video saved the day..

[@charlesbeall2589]

The short vowels in 'the' and 'a' are certainly appreciated! THIS is how people speak!👍

[@ckim6400]

Put these on my P 10 S today! Very pleased with the ease of on/off operation.

[@HatchFix]

Does it fit to P10s?

[@JK13A]

Wow. Thanks for the explanations on how to disassemble the +2 magizine. Everyone was just showing the other CZ magazines.

[@brucenovotny5924]

Very well done. I was beginning to get frustrated, trying to figure out how the heck I can do that. Just brought my new P10C home today. Thanks. 🙏🙏🙏

[@spanishforjames]

Ordered my +2 baseplates on June 11th, Delivered on June 15th. Thank you HB Industries!!!

[@fenderski1234]

Very helpful. It’s a bummer that CZ don’t include any information about this procedure in the manual.

[@ErnestB1]

Thanks a lot with this Video I did change my base plates via this video🇿🇦🇿🇦

[@evnbeta1]

First, this is a two year old video and much has changed. The Chech Republic has a two round extension for our needs. There is a difference between a grip extender AND a round extender. Shop wisely. If you cannot find a round extender stateside, look for CZ USA and do your shopping. I just got the two extenders today and found this excellent video to upgrade the 10 round mags, probably a California edition. The ones I purchased came DIRECTLY from the Chech Republic. Please contact me if you have any questions. thanks again for one of the clearer offered videos on KZbin! peace and good fortune to all.

[@AntitheticMe]

Thanks for the video. I received my +2 baseplates in the mail.....no instructions.....parts I wasn't sure about......so again, thank you!

[@stevenkennedy4130]

Just pick up 3 of these off your website! Thanks!!

[@skutekkutekk]

Thank you, there is no single word about this in original manual.

[@shingotln]

I wonder how sturdy are they... Looking forward to upgrade my slightly damaged OEM base pads with something more strong, but alu pads are way too expensive

[@Papa_Pasghetti]

I would've liked seeing a photo gallery at the end of the video, featuring better views of the bottom plate installed on the CZs.

[@frederickwilliams5288]

He did an excellent job on the demonstration..but will the extension fit the CZ P-10s 12 round magazine he talks really fast

[@Pabon1987]

Out F standing, buying some today. great explanation

[@M1itchyy]

Will this work with a standard (12 round I think) capacity magazine for the P10s?

[@hb_industries]

Yes, these types of basepads will add +2 to all STANDARD capacity magazine bodies, including the P10S. The only situation where these types of basepads do not alter capacity is on the REDUCED capacity magazine bodies, where the body itself stops the followers (IE: 10rnd mags in P07/P09/P10C and F)

[@mikescuba1]

Great, thanks very much for the info. Easy to follow, works a treat. Good video.

[@MrMojo271]

What’s with the gloves? Are you handling the Coronavirus?

[@HatchFix]

Does it fit to P10s mag?

[@patricjft]

Thanks for posting.

[@Nontacticalboy]

Hang on, this mag extension comes with p10c from the factory right? Coz mine does. And I just realized I installed it incorrectly. Thank you for the video

[@apb2887]

How did you install it?

[@RockawayCCW]

I'm curious, why are the P07/P09/P10 magazines not backward compatible with the CZ 75? What did they change?

[@hb_industries]

Great question, the frames are dimensionally very different between the 75s and the newer polymer models. One advantage here might be the magazines for the P07/P09/P10 are wider, which allows more rounds to be stacked in less vertical space.

[@RockawayCCW]

@@hb_industries CZ75 mags were 16 round staggered magazines. Maybe the new ones are true double column mags. That would allow 17 rounds and make them a bit wider.

[@TangoDown1911]

Thank you. Just installed three of these.

[@HeavyChevy1975]

Are these oem parts that are being sold on you’re website? There’s no mention if this is a cz part or hb industries part

[@hb_industries]

These are OEM parts, made for the CZ-UB factory

[@Libor36]

Great guide. Thank you 🙏

[@colevp4707]

Hi, good video but how do I remove these? These came with the suppressor ready model of my p10 and I’m looking to replace them with a + 5 but can’t quite figure how to remove them. Thanks?

[@gersonreis001]

Good, is there a charger capable of more than 10 shots for cz p07 22lr?

[@frontlinepfknr]

Looks similar to a mec-gar one. Would it fit on a canik tp9

[@alfonsorj70]

Simple and informative….great video…

[@1zanglang]

Do you know if P10S OR comes with these two extensions in the box, like the P10C or P07? Thanks.

[@hb_industries]

Not sure; as of 08/2021 I don't think we have had any P10S variants come into through shop with the extensions included.

[@1zanglang]

@@hb_industries Thanks for this info.

[@wireman290]

Ordered two for my P10s. Put one on my P10c just to give it a try. Welp, going to the website to order two more now. Great product, great price, and they don't even gouge you on the shipping. If only you made products for my HKs. HK really nails you on the price of their accessories.

[@eugenejacobs256]

With the +2 extension i manage to get in 3 extra rounds, 3rd goes in slightly harder but it does. Chambers perfectly. Have not fired from it yet. Is loading 3 rather than 2 a bad thing?

[@hb_industries]

Not a bad thing, but magazine might be slightly more difficult to insert/seat into the frame as well.

[@marionzamora5642]

is the length 141mm on a 19rd magazine

[@sigspearthumb5237]

@H B industry you guys still make the +2

[@hb_industries]

We are working on re-stocking them, no ETA though :-/ the manufacturing world is a mess right now, as soon as we can get more we will.

[@extremeshark99]

this man spent half the video telling us about how he likes to organize things rather then showing the instruction itself. Dude spent 6:45 on a 1 minute video.... wild

[@mediumrareribeye]

can you use the new locking plate with the flush base plates if you change back?

[@undeadzombie7271]

thanks felt really dumb trying to take the p10 mag apart

[@v.german11b]

Thanks for the illustration!

[@bikespages1897]

Thanks a lot, very clear and useful info!

[@bobeckstine3748]

Why won’t it work on the 10 round mag

[@hb_industries]

Physically it will fit, but there will not be any added capacity. The follower in the 10rd mag is limited by the mag body, therefore changing the basepad has no effect on capacity. We have however had several customers add these in 10rd states purely for ergonomics. Again the extensions physically fit, just do not add capacity.

[@bobeckstine3748]

Thanks

[@twagn]

When are you going to make more of these. I’ve been on the wait list for a month

[@hb_industries]

Yes sir, we are working very hard to get them back in stock as soon as we can. We hate to keep anyone waiting this long.

[@DJSLo36]

There in stock now, just ordered 2 today

[@factspirate99]

When will these be back in stock?

[@marcospark2239]

Hi, is the mag from 09 serving at 07?

[@AliLortoglu]

hi base plate mag ex. same with cz75b?

[@hb_industries]

No, these are NOT compatible with CZ75 type magazines

[@exodo2226]

Does this work on the P07 Kadet .22lr ? +2 ? +5 ?

[@TheHockey12]

I just received my extension base pad kit. However, my "retaining plate" does not have any of the features depicted in this video. It is a plan L-shaped plate, no holes or anything.

[@hb_industries]

If you bought the base pad kit from HBI please call or email us ([e-mail]) and we will get you taken care of

[@konradpieprzyk6616]

How to change a button magazine from left side to the right side - czp10c

[@88Mobius]

You guys ever gonna have these back in stock?

[@hb_industries]

Yes, we are going to start shipping them again next week :-)

[@Scootbreezy23]

Will it work for the 17rnd mag also?

[@hb_industries]

Yes, these basepads are compatible with the 17rnd mags.

[@jasonelouidor3412]

I was able to fit plus 3 would that be an issue?

[@hb_industries]

All mag/follower combos get +2, some can get +3. Not bad at all.

[@dannyv.6358]

Quick question! Any issues on feeding the last few rounds using the stock 15rnd spring?

[@hb_industries]

No, none at all. P07, P09, P10s/c/f all run 100% with the factory magazine springs. You are good to go!

[@djyorlezz1]

Fit on cz -p10f right i buy 2 on you store i need make sure thanks

[@hb_industries]

Yes, these fit the P10F

[@MrMustang1973]

Will these work on a P10-S?

[@hb_industries]

Yes they will fit P10-S magazines

[@TargetAcquisition]

Why won't it work on a 10rd mag? I read it doesn't add any capacity but it'll serve as an extended grip.

[@hb_industries]

You are correct, the basepads do fit 10rd mags, we just want to be clear that they do not add capacity.

[@robertjacobsen3742]

I notice that my magazines that I put the plus 2 base plates on don't lock the slide back on the last round. Anybody else seeing this issue?

[@FlyboyUS]

Will this work for the P10s 12-round magazine

[@hb_industries]

Yes, great question, we have a P10 specific basepad that will work with all P10 S/C/F models.

[@honda90084]

Does anyone know if these +2 extensions will work on a cz 75 magazine?

[@hb_industries]

No, they will not. Sorry :-/

[@davidbillings1863]

Awesome video. Thanks!!

[@neibol100]

works for Jericho 941 fbl Magazine.??

[@hb_industries]

Not sure? It is possible that they fit the magazine but doubtful that the geometry of the basepad would match the Jericho frame.

[@TheOlivermz]

Very Useful ! Thanks a lot

[@tonyartadi3587]

Very helpful video thank you

[@Rodney883]

I have the po9 suppressor ready came factory with them

[@zhaandutoit6082]

This helped allot thanks

[@jasonhatez3287]

Not really looking for a plus anything. Need it for Full grip. This is what u recommend or anyone that reads this. This will be my edc. Vp9sk and 320rx going away

[@hb_industries]

Yes, adding a +2 on the P07 creates a P09 length grip, +2 on a P10S creates a P10C, and +2 on P10C is nearly the same as a P10F. Adding one of our +2 base pads to a CZ "compact" will give you a "full size" grip.

[@ItchingJ]

Thank you for this!

[@SgtKOnyx]

I really appreciate this video. However, the new baseplate has a larger hole, so maybe not the best selling point there

[@tblisty6907]

thank you very much

[@LitoAP]

Restock pleaseee

[@AdailAntonio]

Thanks! It helped a lot

[@lunaticxp]

Thank you

[@Zamsky39]

Thank you!

[@martinjezek2203]

helped, thank u!

[@philipthomas5834]

Mines worked without moving the retaining plate guess I did it wrong lol

[@edozino4289]

Thanks

[@ZFlyingVLover]

Show the gun using the base pad so that it demonstrates 19+2+1 works THEN show how to add to existing magazine. THAT is how you present a product.

[@tim6986]

OPTIC PLATES!!!!! please manufacture optic mounting plates for cz.

[@Uncle-Rob]

your pen is mightier call CZ Custom , they have them in stock.

[@tim6986]

@@Uncle-Rob I got it. I emailed em when it said they were out, but it was an error on the website. They fixed and I got one.

[@hb_industries]

CZC is the place for optics plates :-) Good choice!

[@techeman1]

Thanks for this.!

[@NwgunsandgearBlogspot]

Now if you had inventory

[@hb_industries]

We were out for a bit, but they are in stock and ready to rock again

[@quintus1535]

Thank you :)

[@kkrrzzyycchhuu88]

thx bro!

[@matthewblanchard7823]

Nice.

[@2ndamendment115]

Why The Fuck Are you Wearing gloves

[@XX-166]

Will this extension work with a flared magwell installed with no feed issues and seated properly ? Thanks