I had never seen the precision these machine can achieve. But, you are the expert behind the end product. Congratulations and thank you for showing the process.
@MealTeam6_5 ай бұрын
You're the man Kenny! I am so happy and proud of your work! Being an Iscar rep I will gladly say you are on top of your game and spared no expense on quality machinery! Unlike many machinist in the world, you understand rigidity and think outside the box on how to machine accurate barrels and actions. Thanks for sharing and keep up the amazing work!
@EagleEyeShooting5 ай бұрын
Thanks brother! I still got you in mind for any iscar questions. Definitely let me know if thiers any tooling I need to look into. I spare no expense as you can tell lol
@FerventReminder3 ай бұрын
@@EagleEyeShooting If you don't mind me asking, what does a machine like that go for?
@CyclopsJoeVideos5 ай бұрын
Great Video man , I watched every minute . THIS shows why custom builds aren’t cheap !
@EagleEyeShooting5 ай бұрын
Thanks my brother! Will be in contact with you soon!
@CopperStarPrecision5 ай бұрын
The ingenuity and attention to detail make these builds worth every penny. Amazing to see you continue to push the upper bound of precision and accuracy.
@ljbellr3 ай бұрын
I just ran across this channel today as I've been shooting more and more rimfire as of lately. Being a past cmm driver for engine components in the past this precision machining is you get what you pay for. Great channel, going to look for your website now. New subscriber for sure.
@mopholo3 ай бұрын
I have a 2 year degree in precision machining, I am not a practicing machinist, nor was I ever, and was never great at it, but watching the explanations you are giving, everything made sense to me, you clearly think this stuff through, and it's fun watching a craftsman apply his trade.
@glennllewellyn73693 ай бұрын
Amazing! Thankyou for taking the time to make such a well informed video. Interesting what you said about the chamber being slightly less important.
@markthibault85795 ай бұрын
Great video. Love the detail and the explanation of what goes into these awesome builds. I love the dedicated 22lr CZ 457 platform and am genuinely impressed with how good it can be with this level of attention to detail. Well done, sir.
@EagleEyeShooting5 ай бұрын
@markthibault8579 thank you!
@sethhughes21634 ай бұрын
Solid outcome raising that level 22 up several rungs on the ladder my friend. Nice to see your dedication and, " hitting it outta' the park ". Congratulations on a job well done young man! Respectfully, Seth
@Cyborg-9115 ай бұрын
All this information is making my head hurt!! lol. Outstanding video Kenny enjoyed every minute of it! Great presentation
@6ixtymiles2 ай бұрын
Bravo! Damn good work. I'm just a hunter, but I'm absolutely obsessed with headshot accuracy up to 75-yrds. After watching this my head is spinning with ideas. Thanks for your great info on these great guns, the CZ's. !!
@scottymakerdude3827Ай бұрын
Absolutely awesome video! Thanks for explaining every step you have to take, and the amount of time it takes to do the precision work. Great attention to detail.
@SydDiedericksАй бұрын
Absolutely amazing machinery and even more so the artisan skill! Thanks for sharing! Unfortunately, I live in a country a few 1000km away. Would have definitely ordered a custom rimfire from you and having the pleasure to shoot such a top range end product. Keep up the good work - one sees very little of that dedication and expertise nowadays.
@michaelbutler49615 ай бұрын
Awesome video, A knowledgeable rifle builder and has machining skills to match. Thanks for taking the time to make this video.
@KarlRadolovic5 ай бұрын
Awesome video with a fantastic explanation of why a threaded action and barrel is better than a prefit barrel and also that the longer barrel makes it less picky with ammunition. Thanks for showing this.
@MrRebTyree3 ай бұрын
Outstanding work, Well Done!!! Very impressive accuracy!!!
@Mr156bhpАй бұрын
Brilliant just Brilliant I've saved this video to watch again thank you Kenny all the way from England
@Womfat5 ай бұрын
So much great info in the video! Your attention to detail as usual, now paired with the new machinery is really making some unmatched rifles. The proof is in the results. Dorys new threaded CZ is an absolute beast and outshoots my vudoos. My next rifle will most definitely have one of your in house barrels. Also, really funny how you use an adjustable wrench for the action haha
@EagleEyeShooting5 ай бұрын
Thanks Matt! Eager to see some footage of you shooting Dorys rifle in a match lol
@jeffreypelletier72475 ай бұрын
Love love love this content bossman!! I really appreciate your passion for what you do I hope someday I can afford a piece of art from you!!
@sjohnson17765 ай бұрын
Thank you for bringing us into the shop. Much appreciated!
@theshootindutchmanАй бұрын
Great video good sir, very fun to watch your knowledge in action 😊! Could you tell us what this rifle would cost just as you shot it at 51 and 103 yards?? Thank you!!!
@Tbowie132 ай бұрын
This is awesome! I gotta look into your work more. I bought a Christensen Ranger after being happy with a Christensen MPR 6.5cm purchase. The Ranger was so bad I sent it back 3 times and they eventually bought it back. I then got a cz457 chassis model and liked it so much, I got another 457 Match Varmit Precision with the flat bottom Manners stock for an arca lock rail. I suppressed it with a "DA mask", Atlas bipod, Audere rings, Vortex PST scope. It's a tack driver. Prob the most accurate rifle I have, high dollar centerfires included. It sure would be awesome to get a little more performance out of it!
@rcg34965 ай бұрын
Loved the subject matter, clear presentations, and detailed explanations… Thank you sir🙏🏾
@donjohnson6055 ай бұрын
Gotta love live tooling. I miss machining been retired for 4years now.👍
@scottsammons77475 ай бұрын
Grub screw does allow for the switch barrel option. Probably just fine for plinkig to hunting. My love of accuracy is a costly addiction.
@EagleEyeShooting5 ай бұрын
Works for barrels sub 1in. Not a good idea for heavy straight contoured barrels. Not designed for that kind of weight
@raymccaleb58345 ай бұрын
Great video, Kenny...and I thought you were taking the 4th off! Bottom line for me is that my budget for one of your 457 barreled-actions came into being at about the same time you acquired the machinery and moved to threaded barreled-actions. I'm two months into the wait period so I will probably revisit this video a time or two (read "a dozen times" 😂) before mine arrives. Ray (Athens, GA)
@JasonTravers-tr2pf5 ай бұрын
Great video on the amount of dedication hard work and ingenuity that goes into your work and why upfront it seems expensive but in the long run will save money. Keep up the hard work and I look forward to ordering one soon from you. Cheers
@westcovinadodge5 ай бұрын
I watched womfat's review of your build last night, nice to hear it from you.
@unclejim23305 ай бұрын
Hey Pat ,,,,oh! 🤭
@GummeeH35 ай бұрын
Hey man. Thanks for wandering over to Josh's gig Sun night. Myself and others really do appreciate your input in the chat. What's next? The DPG action + barrel combo rather than relying on someone else's action? What would you do differently than the other guys?
@EagleEyeShooting5 ай бұрын
@@GummeeH3 😉
@conservativesniperhunter74395 ай бұрын
He’s on to it 😃
@KyrimfireandhobbiesАй бұрын
I love your work. Someday I hope to own one.
@FishingBenB5 ай бұрын
Croissant Wrench! 😂😂😂 Dude, this is outstanding! I'm so excited for mine! And now the 10/22 build too. I can see this is a long-term labor of love and that takes time...Time to develop and time to make. But, I'd rather have steak off a grille seared to perfection than steak out of a microwave. Perfection takes time and this is The Delmonico not McDonald's. 😂 I think I'm going to have to commission a Benchrest build next. Maybe you can talk me into one next time we talk. Good talking to you today. Keep the steel shavings flying. 🍻
@EagleEyeShooting5 ай бұрын
@FishingBenB I'm a bad influence..... let's get the first one in your hands and you tell me lol
@FishingBenB5 ай бұрын
@@EagleEyeShooting Deal. That said... I've experienced your workmanship firsthand. I already know I want at least one of EVERYTHING you make! Might take us a few years, but I know what I like, and I know who I trust. We're going to build a lot of projects together over the next decade. (Lord willing of course)
@CRBW5 ай бұрын
Great job Kenney. That was some tight groups even for center fire at 100 Yards!! Keep up the good work.
@SharpShooterCO5 ай бұрын
Awesome work and I dig the attention to detail resulting in repeatability. I just want to know when you are going to spin up a barrel for the Marlin 39A you have hanging on the wall.. that would be a super fun build 🫡 Thanks Kenny... keep rocking 😎
@EagleEyeShooting5 ай бұрын
@@SharpShooterCO I'll definitely keep it in mind. I got an old falling block 22lr rifle I plan on showing also
@SharpShooterCO5 ай бұрын
@EagleEyeShooting That would be awesome... I have a 39A mountie that I love... way more accurate than it should be, but a ton of 😁
@tonyharper80562 ай бұрын
Great stuff Kenny. The reason for chambering after cutting and threading the tenon is because changing the outside of the barrel results in changes to the inside of the barrel. If you make all your outside cuts first, you don't change your chamber dimensions later. Try it both ways and cast both chambers and measure you will see a difference. Slight maybe but it will be there. The cast will show the differences better than simply measuring.
@EagleEyeShooting2 ай бұрын
Ive tried both ways and the only way ID measurements get changed is overheating the tennon area. It's better to chamber before if you know how to controll your cuts
@donschutte1418Ай бұрын
I am from Canada and back in the 90s I was buying CZ actions for 69.00 from Lever arms they all had barrels attached but they were only about 12 or 14 in long cut off with an abrasive saw or something. We used to take and recrown these barrel stubs and screw them into a stock and without exception everyone would out shoot most anything you compared them to. Out of at least 30 or 40 actions that I purchased not one was a dud they were all very good quality and built fine rifles on them putting new barrels of course
@gdgav4 ай бұрын
Hey Kenny! Great video. Would it be possibe to thread a Tikka T1X action? I’ve heard the barrel change is kind of a pain because the action has an ovoid shape and maybe threading it eliminates the problem and a blank can be customized.
@fredhinck9685Ай бұрын
Many will argue with me. CZ has gone to bean counters engineering the 455 and 457. The 452 has a threaded barrel and receiver. The new versions are cheaper and faster to produce.
@joelclark21305 ай бұрын
Thank you brother. Cleared up a lot of questions. God bless you and, Cannot wait to see your bench rest build review.😊😊😊❤
@PatRMG5 ай бұрын
Oh man! That's sick!
@EagleEyeShooting5 ай бұрын
Hey Pat!
@FishingBenB5 ай бұрын
IKR?!? You're going to have to come over to the house when mine gets here!
@PatRMG5 ай бұрын
@FishingBenB I'll source a better scope for the Vudoo and I'll be over!
@FishingBenB5 ай бұрын
@@PatRMG Bro, I got you. I just picked up a batch of Athlon Optics at a ridiculous deal. Holler at me and I'll show you what I got. 😎
@misterlewgee88745 ай бұрын
Sweet work Kenny Bit jealous of you project...like the ideas. Pity the extractor cuts are so close to the chamber was my first impression..as per the 457 barrel nuts beng so close to the chamber and vibrations. But....I guess that's an unavoidable necessity... Good on you!
@bryanduchane23715 ай бұрын
The equipment you have invested in is extremely impressive!!
@gavinbowman82344 ай бұрын
Hi Kenny I have been following this journey for awhile now. I am a bit torn. With a buy once cry once mind set I would really value your thoughts on the cz457 threaded barrel set up or the RimX with the cut out option you have to remove the push feed? Thanks!!!
@TerrySprey5 ай бұрын
Fantastic video as always novice this is an amazing piece of art
@Precisionmetalworks2 ай бұрын
I would not use the 1/8" wide grooving tool to finish the tenon shoulder. These will always deflect resulting in a tapered (conical) face. A standard vnmg or dcmt od holder will give better results and allow you to program .0001-.0002" concave taper if you wanted.
@markberenbrok6275 ай бұрын
I can't wait to order one of these
@ibbuckshot4 ай бұрын
Greetings Sir, I have been following your work with great interest. I have one question. When threading the barrel and receiver on the CZ 457, What is the thread size size and pitch. Thank you for your time
@cz5035 ай бұрын
Thanks for your time. I am not Mashinist but enjoy your explanations. Can't wait for BR video. Don"t really understand why you don't apply those " BR secrets" to PRS rifles (understanding difference on accuracy expectations by both discipline) . By end of the day everybody is looking for most accurate rifle isn't it ? Shooting good with few different ammo is head space lucky number right? But up to some point where ammo capabilities dictate results. On 50 yards my rifle shoot 5 different brands with same results. On 100 yards things start divide and 200+ one brand stands out. Really wanna see this rifle and shooting ammo from 5$ up to 30 $ per box on 150 -200 yards . My custom barrel is glued to the 455 action ( with proper squaring and hand space ext ) and is something between yours heat and tread fitted rifles. What do you this about gluing fit like mine? Thanks
@EagleEyeShooting5 ай бұрын
As I briefly explained in the video (I know it's long) I can't use tight chambers as I would in a small bore BR build. You will loose ability to extract reliably. The barrels are also built different, causing a cold bore shift. Something a PRS displines cannot afford to have as you will drop points. Glued CZ457 barrels are not a solid inference fit. Just like any epoxy based substance, it will flex. Theirs loctite 680 or equivalent that is a better option but still not as good as thermal fitting or just having it threaded. It's just a nightmare to remove. Perfect example why I don't take in people's CZ457 actions. Folks just FUBAR the system and expect the same results
@cz5035 ай бұрын
@@EagleEyeShooting My rifle is with loctite and it takes very little preheat and small hydraulic hand press for barrel to come out. Interesting point on different barrels build and cold bore shift. What cause cold bore first and/or what's difference on those two type of barrels and most important how one barrel build dictate cold bore shift to be present or not? Would be nice to learn more about this . We just went into a rabbit hole and I know how valuable your time is.
@EagleEyeShooting5 ай бұрын
@cz503 if heat loosens the loctite, I guarantee its not the best loctite to use. A retaining compound is what is recommended to fill voids. I would look into Loctite 680 as its designed for cylindrical slip fitted applications like how the CZ457 barrel is designed. Loctite 648 for high heat applications like an AR15 barrel. It's a PITA to thoroughly clean out of the action tennon area once applied however
@Do-UR-Research27493 ай бұрын
Now that you're threading these receivers and you feel the recoil lug and bedding surface is lacking. Why don't you add a recoil lug like a Remingtion action? I understand that there will be limitations on stock options. However, they could be pillar bedded back on to the factory MTR wood stock, or maybe you or another Smith can fit it onto a currently available chassis with a little additional work.
@EagleEyeShooting3 ай бұрын
@@Do-UR-Research2749 no need for a recoil lug... theirs no "recoil" in a 22lr to put the action under stress. The rear lug and chassis screws are more than adequate to hold rigid
@DougHalkerАй бұрын
Fantastic...THANK YOU...Doug , Texas..
@jerryjackson59395 ай бұрын
Wow, what a great showcase of all the work you do to achieve accuracy! I am a smallbore prone shooter, do you ever work on Anschutz 2013's?
@EagleEyeShooting5 ай бұрын
I might have. I know I've built many 5418's for the Silhouette shooters. I currently have a few I'm working on for that community
@jerryjackson59395 ай бұрын
@@EagleEyeShooting The Anschutz 2013 barrel is clamped into the action from the factory. The action is square and has 4 clamping screws. Would you consider installing one of your barrels on a 2013? 1/2" groups at 100 yards is incredible! The only difference on a prone rifle would be thinner diameter (normally 0.900).
@robertwarren60204 ай бұрын
Very professional love your show. Have fun God bless.
@airgungreenie28445 ай бұрын
Very informative video. its not that long when its fully packed with information. unfortunately my location can't gain access to your shop. if only, ill be there already with my rifle.
@johnsmith-cz1ty4 ай бұрын
Hey your videos are great. I have a genuine question, why do you prefer inches compared to millimeters when measuring dimensions?
@andyphillips35 ай бұрын
another great video, cant wait for a benchrest build, but keep the secrets, after all you worked hard to find them ..
@robertgartner60725 ай бұрын
Hi Kenny - Love your work, a perfectionist! My brother was a good machinist so I have an appreciation for this work. I am leaning towards getting a CZ 457 and from your shop. I do have a question about your newer threaded barrel process. I hope it wasn't already answered. Are you 'facing' the reciever's barrel insertion end to match perfectly with the barrel shoulder? I know other rifles seem to benefit from this practice. It is more time consuming as you may need to measure how much is faced off and add it to the barrel measurement. Best Regards -Bob
@EagleEyeShooting5 ай бұрын
@robertgartner6072 hey Robert, if your referring to the receiver face. Yes, I square up the receiver face where the shoulder of the barrel meets the receiver. I usually take out anywhere from 1 to 4 thou. This video, I removed 3 tho. At the end of this video I actually have a diagram of this receiver that I drew and showed how a prefit would sit if this action wasn't trued up
@robertgartner60725 ай бұрын
@@EagleEyeShooting EXCELLENT WORK! Thanks for the response!
@HITTING-STEEL-CA5 ай бұрын
Yup you’re right. It was 119 in Yuma today. Its great working out here
@EagleEyeShooting5 ай бұрын
Yuma?! You ain't far!
@HITTING-STEEL-CA5 ай бұрын
lol. Yeah man. We need to get together man. Miss your mug. Give me a call sometime brother
@GummeeH35 ай бұрын
@@EagleEyeShooting one of my roomates in Sandy Eggo was a river rat. Spent some time in Yuma myself. 'Interesting' town. Coming from Sandy Eggo it was always bloody hot there. Then I moved to Tucson and realized it's only bloody hot after about 110. Till then, it's livable
@keithlshepherd27385 ай бұрын
Can’t wait till you get to mine patient is a virtue 😆
@EagleEyeShooting5 ай бұрын
@@keithlshepherd2738 lol😄👍 eager to hear whatcha think
@TedJ715 ай бұрын
I have the MPR, and am very pleased. Super accurate !
@EagleEyeShooting5 ай бұрын
@OldVetUSN72 awesome👍
@austinkroe5 ай бұрын
Excellent video. Can’t wait till I can save the money to order one of these to go along with my thermal fit that you did. I’d say the biggest downfall for me on the 457 is the lack of triggers that are on the market. There isn’t a two stage out there and the selection is tiny compared to the 700 footprint actions. While the triggers that are available are nice they just aren’t what I would like and I think the other actions have that advantage over the 457… just not enough of an advantage to make me want to switch platforms. I think the 457 community is blessed to have you. Sadly it seems we may have lost one of the other big contributors to the 457 being able to overtake Vudoos and Rim-Xs in competition; Bill Scaramuzzo. His triggers were the absolute best for the 457. Sadly it seems he’s out of the picture. I have one of his two stage triggers and I wish I would have bought four of the dang things when all I thought I needed was one. I wish someone would start making them to his design and specs cause I’d buy a bunch of them. It’s so much better than the Jard or Timney. I wouldn’t trade that trigger for a complete build 457 if you put a gun to my head. Someone needs to put out a good two stage for the 457!!! Do you have thoughts on two other possible shortcomings of the CZ; that being the scope mounting interface not being as secure as some other actions and the fact that the bolt lockup is asymmetrical (ie only one lug)? Obviously the 457 leaves some things to be desired but it’s still great. Looking forward to seeing your benchrest build video to see what fine little details you squeeze to make a gun even more accurate than the CZ you put together in this video.
@jeffreyhershfeld54515 ай бұрын
Kenny another great video of you explaining your detailed process. make's me want to get a third rifle from you. I am interested in getting one of those 1.25 muzzle brakes for my 6ARC from you. I will contact you soon.
@EagleEyeShooting5 ай бұрын
@@jeffreyhershfeld5451 I got a couple made. Lmk
@RaymondMares4 ай бұрын
What a great video, loved it!
@joevangorder10065 ай бұрын
Great video Kenny!! I only wish I could send you my 455 action for this custom barrel fitment since I already have it in a fully decked out MDT ACC chassis and found out the hard way that my newer 457's will not fit in that chassis since they moved the bolt handle position !!! I was really disappointed that I'm pretty much stuck with an almost obsolete action chassis now but please lmk if that's something you could work with? Thanks either way
@EagleEyeShooting5 ай бұрын
@joevangorder1006 absolutely, it's definitely on my mind. I know someday I will be able to allow gunsmithing on clients rifles. As of right now, It's just me and having to balance all of this. Its just not fair to hold onto your rifle for months until I can get to it. Same goes with the new builds....
@joevangorder10065 ай бұрын
Well I can definitely appreciate that sir, thanks for getting back so quick on this too!! If that day ever comes though, please just let me know and I'll have my action overnighted to ya lol
@bobfugazy49164 ай бұрын
Kenny, that was quite informative. If one is in the market for your services would you recommend a particular type of CZ457 to begin with, send it to you and then you customize for me? Is their some price guides? I'm not looking to nickel and dime a craftsman but this would be a "save for" item for me personally. Thanks and keep up the amazing craftsmanship.
@gerhardschulzy5 ай бұрын
Think Womfat got a Gen 2 MDT ACC for his wifes CZ. It looks sick and think it had the cut out for the mag release if i can remember right
@surreallife777Ай бұрын
Who makes the chassis for your gun? Can you buy the CZ 457 mechanism and add it to this chassis? I was thinking of using a kidd Barrel.
@senditsa5 ай бұрын
hi, great video! did not know this about the cz457, just got my approval on my CZ457 varmint. You made me think a bit. Your process is some of best i have seen. Wondering if any of the gunsmiths here in South Africa done this for the Cz457. Thank you for the content.
@EagleEyeShooting5 ай бұрын
@@senditsa have them look into this video. The machine work isn't hard to do
@ThinkSoberly5 ай бұрын
I’m sure that your custom rifles shoot way better than my Prefit build, but I simply could not afford one maybe down the road. Love your content!
@PrecisionDavePlumbingMore5 ай бұрын
@EagleEyeShooting How does the Day at the range challenge make sense when guys shoot 10 boxes and show their best group?
@EagleEyeShooting5 ай бұрын
Day at the range host monthly challenges. It's not all about group shooting, theirs many challenges. This encompasses all aspects of precision small bore shooting in a friendly competitive community. It's a great way to connect, prove your worth and meet other like minded folk. Anyone can claim their rifles shoot better than others in youtube comments. Prove it
@keithlshepherd27385 ай бұрын
He’s not worth commenting on sounds like a hunting camp my grand paw has 100 years old black powder rifle that shoot quarter inch groups at 100 yards haha😂
@keithlshepherd27385 ай бұрын
All I can say your welcome to try just name the place and we will see if you can back it up
@LogosMediaII4 ай бұрын
Mind blown. I have a 455. Would love to get it up to par.
@crtxdistortion6572 ай бұрын
Second (third) time watching this. Wishing I had te option of sending my 457 to get a threaded barrel... Anyways. How would just truing the action removing the taper, affect accuracy and precision with a standard/pre-fit barrel?
@CHRISBAKER-r8p19 күн бұрын
Great work! One note .... Your using the crescent wrench backwards.
@EagleEyeShooting19 күн бұрын
Lol thanks and good eye! Yes I caught that also
@kochj07134 ай бұрын
Would a grinder attachment on your lathe be an option to get that melanite finish off? Or does that cause all kinds of problems as well, including having to adjust for the grinding stone wearing out?
@clearlakerain2 ай бұрын
Fantastic work. If I provided the rifle CS457, what would your work cost me. I understand prices change over time but could you give a ball park estimate using a percentage of the retail price of the CZ45 to give me, and probably others, an idea for weighing cost against improvement in accuracy.. Thank you
@EagleEyeShooting2 ай бұрын
I currently do not provide gunsmithing services. From expirence, it has been more of a headache fixing gun plumbed rifles while folk expect the accuracy seen here. I build from brand new which allows me to warranty the rifle throughout its lifetime
@clearlakerain2 ай бұрын
@@EagleEyeShooting // Thanks for the reply. I should have been more clear when I asked my question. I was thinking a factory new rifle not a used, worn-out POS. I intended the question to be broad and generalized because I was so vary much impressed by your work I needed to say something. I don't have the funds for such a project anyway. In short I was blown away by your talent. WTG & Blessings to you and your loved ones. Ron from Mt.Vernon, Washington
@CandidZulu5 ай бұрын
I would add a Tor Heen style adapter. A short section of finerr thread. The action is cast from steel not iron.
@napamura41175 ай бұрын
Dang!!! That grouping is like ...... 👍👍👍
@genecoffman35775 ай бұрын
Fantastic video. If I was a youngster my check would be in the mail.
@dougkapounek90245 ай бұрын
Hi, fantastic and informative video. Not sure if I missed the info for helping cold shot ? If this helps or not.
@EagleEyeShooting5 ай бұрын
@dougkapounek9024 it's the barrel quality. Can't fix cold bore if the barrel already has one
@juanrojos782 ай бұрын
What type of paint do you use for the fire and safety dot?
@EagleEyeShooting2 ай бұрын
Cerakote. With color fill pen
@JCJustice-kv2gy5 ай бұрын
Great stuff. 👍
@carpediem32202 ай бұрын
What an absolutely fascinating video. I just bought a cz 457 and love it. If I wanted a barrel from you, do I send you my rifle or do you build a new cz457? I have a Chinese copy, a norinco I think, of the cz .22. Can you do a barrel job on that gun? And finally, I have a Sauer 202 forest in .308. I would love a barrel in 9.3x62. Can you make it? Thank you for your time. Kind regards, Max
@ElfstersRiflesandReloading5 ай бұрын
As always, amazing video
@crowhunter1125 ай бұрын
Amazing work!!
@TimGeissmanАй бұрын
My daughter just picked up a cz 457 at one 16” barrel. She bought a short barrel because its weight was less and she only weighs 103 lbs herself, the salesperson told her barrel length would not matter 300 yds and under . I hope he is right .
@brian7705 ай бұрын
new sub, loved everything about this vid !!!!
@MMountain825 ай бұрын
Awesome stuff
@jeffbadger4622 ай бұрын
What is the rough cost of all this work ? Wonder if it would be worth it for a rifle you just use for club matches?
@RobertPalmer-o2g4 ай бұрын
What is the current wait time on just a barreled action? Thanks!
@scottsammons77475 ай бұрын
Just a good natured comment (mostly in jest) Fellow KZbinr BlondieHacks would make a custome wrench for that action. Gotta love Quinn. A love of precision has many expressions.
@EagleEyeShooting5 ай бұрын
Lol great channel. Out of necessity and lack of time, I can easily make a action wrench for a CZ457 if I wanted to. But a good Cresent hammer wrench works just as well
@user-dm7co8qy1t5 ай бұрын
Awesome info, thank you.
@garymeyer32945 ай бұрын
On average, how long does it take to do all the machining on the action and barrel?
@vektormaskin3 ай бұрын
Sir, I’m sorry to tell you are wrong about the receiver beeing a cast item. It is definitely machined, either from bar stock or from precision tubing. Also, the CZ barrels are hammer forged, not button rifled. Threaded connections are inheritely less rigid than shrink fit or clamp fit. It works good for 22’s because of minor forces during the shot, so barrel is less likely to shift. Shrink or clamp fit might injure accuracy on 22’s due to slim tenons, short chamber and soft bullets, but are stiffer and better than threaded connections on larger calibers in the appropriate actions. Improvement point in your solution would be to incorporate a very tight cylindrical slip fit both ends of the thread. A lot less shift in barrel pointing is thus allowed. Yes, you have room for it. A 22lr need no more than 2 rev of fine threads.
@jakew24785 ай бұрын
Out of curiosity, is it possible to (you mentioned it in the beginning) to have a 22lr barrel and a 17hmr barrel that are threaded and prefit spun up for a 457 american action that you thread? I would like to be able to swap them, not super frequently, but I want the ability to.
@EagleEyeShooting5 ай бұрын
@jakew2478 absolutely, it would be best if we order the CZ457 in a 17hmr for the factory barrel you can use
@scottsammons77475 ай бұрын
@@EagleEyeShootingI am getting several switch barrels in my safe these days. If YT will allow better linkage to your business, it will help find you. I love your content, and would be very interested in getting your product.
@rubberduckysantos54085 ай бұрын
I would buy one asap but gotta be sent down to OZ
@jimmybeaty83 ай бұрын
How can I get one of your custom Complete rifles in 22 long do you have a brochure?
@nathan00campbell3 ай бұрын
I fell for the CZ rimfire hype. Ended up getting a very nice bull barreled thumb hole stocked CZ 457. It was chambered for 22 long rifle and had one huge problem. The first shot of the day would always be about 5 in away from point of aim at 50 yards. Randomly anywhere. After that it would group dime size groups until you let the rifle sit for a few hours. Sitting for one solid hour didn't do it. Something about the rifle being in the AC would make the first shot wild. And I wanted it for varmint hunting so this pretty much made the rifle useless. Sent it to CZ three different times with no help. They claim they couldn't repeat the problem. Which is funny cuz it didn't care what ammo you put in it it had the same problem for the first shot of the day every single time. I didn't want to rifle that I had to walk out fire around off and then hopefully trust it when I finally see something to shoot at after the fact. Sold the rifle at a loss, and picked up a base model 457 that did the same damn thing. Returned it for my money back and have not bothered with CZ since.
@thegriff94255 ай бұрын
Seems like a lot of work to accurate a sub par action compared to a RimX or Voodo? I know there a lot of CZ lovers - I own one - but why not just run a custom?
@EagleEyeShooting5 ай бұрын
@thegriff9425 I guess most folk have a preference and already have a lot of CZ mags and or a chassis. It's also about 1K cheaper to build as a custom vs the 700 custom actions
@3of113 ай бұрын
watching r700 / vudoo guns choke on those finicky mags in a match and the tinkering required to get them to run. Forget it. cz mags have been working great for decades.
@jonbarendse21725 ай бұрын
Wow! I cant wait to get mine in! Wicked excited, keep up the awesome work.
@bobborlog16774 ай бұрын
Can you guys make a threaded 9x39 and a 458 socom barreled action?
@EagleEyeShooting4 ай бұрын
Yes. Zermatt Arms Origin action would be our recommendation
@17thefuzz5 ай бұрын
Hello I would like to write some corrections here. 1) Actions are not casted but machined from solid crome moly steel rods. Steel casting is only used for steel pistol frames in CZ 2) action is not parkerized but nitrided like most of steel parts made in CZ. There are some exceptions that are blued but many. 3) barrels are not button rifled but cold hammer forged. CZ only uses cold hammer forging for everything from rimfire rifles, through pistols, Scorpions to Brens.
@EagleEyeShooting5 ай бұрын
Your incorrect. The actions are casted, I broke a few in half by accident. That's how I know. Saw casting voids and could not successfully tig weld without using a lot of gas The finish is parkerized some have been melonite coated. This was verified at a local nitride company as I was sourcing options to make the action slicker I didn't state that the factory barrels are button rifled. MY Barrels are You need to check facts before trying to correct. Also, liking your own comment is hilariously conceded of you.
@realtruth42595 ай бұрын
HATERS GONNA HATE... KENNY=#GOAT
@spr00sem00se3 ай бұрын
At what point does it cease to be a cz when almost every part of it has been changed ?
@EagleEyeShooting3 ай бұрын
@spr00sem00se still cheaper than a full custom. If your looking for cheap accuracy, this ain't your intrest
@spr00sem00se3 ай бұрын
@@EagleEyeShooting I Dont say it because of cost. It just seems to me that when the reciever and bolt are original, it may be time to think up another name for it :) Armoured car manufacturers build on an F550 frame, but dont sell their product as a modified F550. Dont take it the wrong way, its only a friendly comment. I enjoy your videos on the subject. Annoyingly I live in a country where once a barrel is shot out, you may aswell change the fire arm as the paperwork for a new barrel is far too much. Im not sure what all the F-class shooters do about this.