D.I.Y SURFBOARD

[@davidsjones]

Im still in the USA! This is a throwback video that I forgot to post earlier! BACK TO SNOWBOARD VIDS TOMORROW!

[@meinemudda3095]

davidsjones is yout homemade surfboard good like a board from a brand ? Or is this like a brandskateboard and a wallmarkt board?

[@mattyoblobber]

Your dads the coolest david, such a good video

[@steverocca9911]

Thinking the same thing. Give him random hugs!

[@vadcatdog3934]

This is a amazing! if were you come to korea, I'll make this project with you!

[@globaltech7637]

@davidjones hey bro, what is type of foam you used. It is polystyrene foams or xps or eps?

[@machez1979]

I surfed a bit in my life. I'm 41 now living in New England but you got me wanting to make one. It would be a great project for my son and I. Thanks for the vid!

[@lexyw1988]

Good work lads. Didn’t think you’d make anything decent but it turned out great. The world needs more people like you guys.

[@oscarcamacho8455]

Please, could you share the measurements? Like how to draw and measure each part? Thank you. Awesome video!

[@jah_b]

You can find prints online if you look it up

[@jordanmorrow4757]

Prob too late but blending curves has templates

[@edippoliti4531]

Thanks for the video ,this is definetly one if the best I've seen in terms of showing detail descriptions of each step ,right to final final glassing ,great idea for the fins ,and very inspiring to those of us on a bing budget ,useing Home depot polystyrene foam insulation ! You proved to us ,it can be done ,thank you !

[@bradleyboyce23]

This video is great broski!!! Completely dig the creativity and craftsmanship making that board took. Major props on the effort. The music in your videos is very cool as well. Keep em coming! Btw, the zip line passes are in the mail and should be to Matt's in a couple days.

[@eddybobea6709]

Pretty neat, very interesting DIY is one way to go. Shout out to dads! Thanks for sharing.

[@satthewmmith]

boi using a cheese grader to sand the fin LOL

[@themaskedamateurmagician1209]

hey do you know what resin he used dor that board ?

[@itzshft]

Latif, epoxy resin

[@natalieneverends699]

🤣

[@simonhanley218]

Boi its a rasp

[@RYZEN2077]

Not a cheese grater that is a rasp😑

[@grandmasterflash213]

Awesome! I love the chilled vibes. I’m thinking a possibility to get the rocker curve would be to cut it with a hot wire, following wooden jigs either side. Just and idea!

[@TechMechMen]

Good job dude! Very inspiring I know for a fact that projects like this take a lot of time and patience. Time I've got a lot of, patience, not quite... but I like making things so I might try making one myself.

[@Jajasjazz]

Thank you so much for this video, I’m in Hawaii going back to Switzerland and the first thing I’ll do is make a surfboard ✨🌊

[@doc-holiday]

That's a fantastic effort for your very first time. Well done.

[@oldjackyoung]

YOU GUYS ROCK! Great to see that creative spirit. Always try something new! That board is great (those waves kinda suck though)

[@keitholiver2842]

the board turned out better than l thought it might, remembering we all have to start somewhere, well done from Keith Oliver Harryo Surfwear Australia.

[@kevintyrer45]

That's awesome. I finished making my 4th board in 18 months. Each board has worked out. All of them poxy. Last one 5.5" carbon rails. My take on a Hypto n monsat 6. I've surfed it from knee high to Double over head. What fun to Bragg & say to the guys in the water "I made this" Well done. When are you gonna make another one?

[@sprunkt]

Wow, awesome work, and great job documenting it!

[@JareNijkamp]

You my friend are a true artist👨‍🎨

[@benluick6758]

no way man good for you man gotta try new things. I did think it would work but damn it works man! happy you made it work. you showed everyone that if you try you can make it work! shit I'll try it man...

[@jordanmorrow4757]

I make boards and this vid was hilarious😂loved watching the differences in what I do

[@passanglhamo9063]

OMG David, that was amazing! love ur DIY action 😉👍

[@Polish_Hammer1987]

👍😁👍 I'm doing a custom 11 foot longboard blue,red,yellow with superman and dragonball z decals on top. Torch red with racing stripes on the bottom. Cant wait till its done!

[@coltonbenedict2729]

How’d it go? Assuming ya finished it. Any tips or helpful advice when making a board? I’m thinking about giving it a shot.

[@timdale4047]

Good for you for havin a go. Makin surfboards ain't easy

[@gabeshepard1185]

8:43 cottonwood firing squad glad youre doin well

[@paulosilva-dm1qb]

The pionners are recognized by the arrows in the chest..If it weren´t by the pioneers we would still be in the stone age.. Congrats young boy..

[@romano5672]

Hey bro I live in Auckland and been surfing for awhile but never have thought of shape my own board. You inspired me to shape a board this year! nice vid! keep surfing!

[@tito668-l3t]

You have a really awesome dad, congrats (:

[@niekvanwensen2904]

This is so cool. That board looks pretty professional l

[@MrKangomik]

10 out of 10 fella, never comment on clips, but wow, well done.

[@dcos7703]

so sick!!! the board turned out crazy good!!!

[@ThePokersurfer]

You have an awesome dad!

[@zouheirnajid4396]

Great job great dad great memory 👍🏻🏄🏼‍♀️🤙🏻🇲🇦

[@michaelsurfdawg7353]

You have a cool dad!!!!!

[@johanlucas1384]

Now you can buy the polystyren already shaped and with the wood plank in the middle and it's not very expensive.. I've done mine with someone show me. You can already put gouache or POSCA before the last slice of resine (don't forgot to sand down before each slice of fiberglass)and you can make the fins with wood (but that need a slice of resine on it) . 😎🏄

[@sophiamancini3506]

Hey during quarantine I am going to attempt to make my own foam board!! I would love some advice from you!!

[@seanm3189]

How’d it go??

[@27walker27]

be interesting to know how long this lasted? and if there was actualy much difference between a similar legit board?, im just getting into surfing and the prices of boards seems crazy...half tempted to give this a go lol

[@sukryronde2291]

guys this is perfect, i invite you to galle where there are lots of enthusiast for surfing in dewata beach

[@henrikwal2907]

My boie David out here with that goddamn Gucci surfboard

[@Theo-fp2oe]

Wish i had this relationship with my dad. He provides for us fine but he has a short fuse, so working with him on projects like this, is impossible. Anyway awesome video dude.

[@j3in725]

but still love him, he's your dad and provides for you he may have his short comings but we all try to work on our SELFS, and as lo g as he tries his best to provide for you he's a good dad, cheers and love your fam

[@jxck5628]

No one gives a shit

[@mohammadlevy9668]

That early music is from the saddest town in Italy dood. No doubt it was free. Cudos for going for it on the blank and complete. Holy fak on the fin job tho, lmao. Next time, put them on after glassing. All in all, I was entertained. Thumbs up

[@joshuaschaffer6371]

Cool man. I have never built anything like that. I fix stuff a lot but I don't build much.

[@mccc4559]

You're cool bro....and I am an old person but now I feel cool too !! 😎

[@Sam-81810]

Mc Cc lame

[@notcosmiclobsternoooo118]

@@Sam-81810 Stop being a dickhead, grom.

[@PerAnkh418]

Brill Vid, great build there 👍🏻 ☺

[@Bomber848480015]

Cool video, looks like a fun project!

[@jackrussell19a]

Such a cool project to do with your dad..

[@jesperkuijlaars1510]

4:23 oughh that sound!!

[@approachwithcautionproduct3880]

Incredible man!!:) Truly impressed!!:)

[@fholototBe]

Nice video! I will do a surfboard one day after this video!

[@felipelinssalgado1912]

Man, I wan’t to do it too! Great job!

[@yazmut]

you are the man mate!!!!!!!

[@calholden9040]

Inspired me to build this soon as the weekend comes! Thanks man

[@calholden9040]

Great project to keep yourself entertained for a while

[@coleherrett5120]

Ho righ the guccifed surf board

[@THEcornskismo]

That was so soothing!

[@NIAMProductions]

this inspired matt to try and make a snowboard in 3 hours out of a piece of 2x10 wood and a sawsall lmao

[@theimpaler5034]

Next time try and buy dense foam as it will float better I remember starting to surf the old single fin foam boards

[@justdashie1132]

I like winter better than summer

[@paulohenriquerodrigues1585]

That was what I need to start doing my own shape! thank you, God bless ya! greetings from Brazil !

[@clin2017]

so cool to see you do this haha, i'm too lazy to ever try to do something like this

[@JoelOnganVlogs]

Nice one buddy. Your so good. god bless.💖

[@anrichslater9259]

How cool is this!

[@lukemcrae_]

Great stuff man!!!

[@jai__fox7403]

That’s a THICC stringer lol

[@rogeriosilva915...]

I made a skimboard with my sister's boyfriend :)

[@iivibesii5294]

Omg-

[@dyljoskill7292]

Oh my

[@joshifyed9855]

Hell yeah mate, I live out there in Tauranga, love surfing aswell!

[@tipenemaguren4145]

broski that is epic stuff!

[@gabriellatini1590]

nice! i just made my first board in a similar way. I watched your video and it definitely inspired me. keep it up!

[@clearwaterhydrofoils4313]

Awesome man! Way to get at it

[@oscarrmurphy]

Really good vid David keep it up

[@grahamarthur]

Beautifully done 😎

[@vovakulikovskiy3400]

I liked the way you did it. Thanks bro. I want one-_^

[@mikeyokai]

Great video, well done brah 🤙

[@EvanMoon]

1:40 Instantly want Smore’s because I thought of the glue squishing out

[@jonivan1014]

Great job! I see a future surfboard maker!!

[@astynpapatinho01]

hey this is very inspire this is the real spirit of surfing try to do something ever if u do not how

[@maxetheridge1247]

Make a snerf board video! That would be hilarious,but wait till there's powder to ride it in.

[@WhoIsRokky]

That board is dope

[@ilank43]

Cool job. Can you please share which glue did you use for gluing the white polistren plates? thanks.

[@gorila1958]

Yep a great video . This is on my bucket list of things to build . #oldguy building stuff .

[@mineaikheexhayaieaquino2309]

newbie surfer here! would loved to do my own board with my dad too, soon! 👌

[@Variushna]

Such a cool idea!

[@kylelark1146]

this is sick

[@SkateCrisis]

Cool DIY video Dude!

[@indiasdjnan8579]

Hello brother, 5:19 which black pipe machine did you use for finishing?

[@ariadnarahola3356]

Lol u inspired me to make a surf board too !!!!!

[@danbeare5263]

Good work Mr & Mr Jones! :D

[@contarinifamily2183]

Well done mate!

[@DeanTheDeadRose]

Wazzup man!!! More of my favorite KZbin man

[@progamerx2649]

Thanks for this video because I did not have surf board 😭😭😭

[@jerediahmendoza5452]

Love this vid

[@6ftS]

wow man. well done. if you want to you can do anything

[@mrsimse6997]

great job boiiyyyy

[@fraserfalconer3862]

A surfboard out of Polystyrene hahahahaha maaate great job!

[@themaskedamateurmagician1209]

what are surfboards usually made out of ?

[@colbysilagy5072]

Latif polyester or eps

[@Surfmus]

Very common. It's called Epoxy surfboards. EPS foam and epoxy resin. You can basically make a surfboard out of any core that has buoyancy.

[@alexruiz1226]

“Great success”- 😂

[@jonwikan3986]

Good job! Nothing random about the build, you obviously know about the basic building of a board.

[@alamikoy5750]

nice work ma man! so i am 130 kg, how long and how thick should i make my surf board?

[@TheSurfboardGuide]

This is epic!

[@tomharrell1954]

You said you were not doing it right! I don’t know how you could have done it any better.

[@kangillgoo]

really good DIY!

[@jomosky]

wow thanks for great vid !!

[@williammarnoch174]

well the overnight part gave him a rocker lol

[@jhonatanvasquezbolanos3992]

hello friends good video greetings from cartagena colombia ..a question that white cloth is the same one used to make glass fiber works or is it another and what is it called?