Steve rebuilds the D-Rod to be the best its ever been! Welder Up Store: welderup.com/c... DON'T FORGET TO LIKE THIS VIDEO AND SUBSCRIBE TO THE WELDER UP CHANNEL! #Diesel #RatRod #DRod
Пікірлер: 75
@MalcOfLincoln5 жыл бұрын
You know what I like so much about your filming Steve.....no bullshit. Just facts. Please keep doing what you're doing.
@WelderUpVegas5 жыл бұрын
MalcOfLincoln Thanks buddy we truly appreciate your support. New videos on the way
@kennethengel80693 жыл бұрын
I like the fact that he actually works with his help. Not just standing there doing a video!
@bigrich21105 жыл бұрын
🇬🇧 from the UK keep these coming! an hour a show isn’t enough the channel adds all the technical stuff we all love ! 🇬🇧
@MrRebar155 жыл бұрын
Very cool, thanks for taking the time to show us. God Bless.
@DocLulzson5 жыл бұрын
Why doesn't this channel blowup all crazy with subs? This is way under rated IMHO.
@esimler5 жыл бұрын
Better content here than what was on discovery channel 👍🏻
@DocLulzson5 жыл бұрын
Shows more steps.👍🏻
@BUILTDIESELMAFIA5 жыл бұрын
Dynamite diesel DDP for the win!!!!!
@joemeier6594 жыл бұрын
Just starting watching Vegas Rat Rods 2 months ago and love them. started watching your KZbin channel too and I've learned alot from your videos. Thank you for the facts and keep doing what you're doing. #WelderUpfam
@bigpesa61664 жыл бұрын
Likewise..great show 👊
@MayhewTools5 жыл бұрын
That is one"diesel" motor! 😉 Can't wait to see it installed!
@lowandslowga5 жыл бұрын
That's a great solution to the gear problem! Love your KZbin channel!
@lars-andersmalmberg40423 жыл бұрын
Hello Steve, it's Lars, I just saw the show about D-Rod rebuild and i must say that you and the crew are the best bad ass car builders, sorry for ruin your new back axle, but you fixed that and the people could see you an D-Rod on the track, keep up the bad ass car building 🤘🤘👍
@WelderUpVegas3 жыл бұрын
Thanks Lars, sure appreciate your comment.
@lars-andersmalmberg40423 жыл бұрын
@@WelderUpVegas it's Lars my pleasure Steve, it had been cool to visit your shop one day and ND only God knows if i might do it Steve 🤘👍
@mikefedele45215 жыл бұрын
The "D" rod is coming back to life mayhem at it's best. I love knowing I'm not the only one who overbuilds stuff. It is fun trying to break it after all. 😜
@woos315 жыл бұрын
Right on Steve, I've been waiting for this re-build for a long time! I never thought I'd be a rat rod guy....... .until you went and put a 12 valve in one, you sunk that hook deep man. Keep the videos comin sir, especially the oil burner shenanigans
@adrianbertin5 жыл бұрын
Dig it! Great tips and pointers. 👍👍 Keep em coming!
@frankhagar46515 жыл бұрын
Thanks for including everyone and the tips,
@mikepoint49835 жыл бұрын
Straight to the point I love that . Great build and wicked Channel . Cheers
@alnev66645 жыл бұрын
Love the channel Steve !! I’m telling everyone to subscribe . Your a natural instructor/ teacher and I really appreciate all the information you give us👍
@jimbobunn51955 жыл бұрын
I've seen people drill a second dowel pin on the opposite side. But welding it seems like a better solution. Thanks for the tip!
@69JANKS5 жыл бұрын
a Double KeyWay the way to go I'd say, just like what the Blown boys do down below on the Crank snout/Balancer..... Luv the show btw, badass 😎🤙🏼
@irapennington53554 жыл бұрын
Love these videos and the sharing of knowledge
@louispugliese72005 жыл бұрын
Great video, again. I personally like where you're going with these videos. Learning all the time. Keep it up. LJ
@WelderUpVegas5 жыл бұрын
Louis Pugliese will do Louis, that’s for the support
@franksgarageandcustoms83215 жыл бұрын
Awesome Steve! Love watching this stuff. Only thing is,i know very little about diesels. That’s about to change, late 90’s cummins is getting dropped in my lap,runs good but its rusted out. Scrap value. Think it time to build a rod. Lets make some smoke!!
@roynelson76134 жыл бұрын
That is badass brother 👍🏻👍🏼👍🏼👊🏼👊🏼
@joeestes81145 жыл бұрын
Awesome new videos! Love em!
@prancstaman5 жыл бұрын
Welderup. You know he was going to weld up something on the motor, LOL.
@Lucifer07-r7u3 жыл бұрын
Im big big fan of you❤️,im from Bangladesh 🇧🇩🇧🇩🇧🇩🇧🇩🇧🇩🇧🇩
@WelderUpVegas3 жыл бұрын
Thanks so much and thanks for watching!
@vintagesavoiur5 жыл бұрын
Great video, love the tech tips
@cyberpunk46225 жыл бұрын
I'm curious what the new motor will do on the dyno.
@mikestrucks5 жыл бұрын
Very good video 👍🏻
@79Z28Hellion5 жыл бұрын
Love the vlog stuff. Can probably make more money doing this then TV. Lol, keep the content coming, and you’ll grow a mass following.
@markweber29585 жыл бұрын
Yes no b.s. just good info ...and a man that gets his hands dirty...thanks steve
@WelderUpVegas5 жыл бұрын
Thanks for the support Mark
@stokeburner67305 жыл бұрын
Ulra black is the only way to go in my opinion and its definately better than a gasket on a lot of applications.
@humptydumpty38025 жыл бұрын
That's so cool, I've never had the opportunity to wrench on a diesel! Was that black rtv in a cheese whiz style can? Lol Thanks for sharing.
@yoyobenjo15 жыл бұрын
Always use never seize with stainless bolts stops them binding the thread. 👍
@tazyt33885 жыл бұрын
Shit yeàh its gonna haul balls mate get it done n get fangin it ,awsum cheers
@jakeguenther54575 жыл бұрын
Just curious. But wouldn't welding on there throw it off balance? Or are the welds not big enough to worry about that?
@chrisshapardon16402 жыл бұрын
Why did you choose the TH400 over say the 727 torqueflight just out of curiosity for my build 🤔. Chris-Michigan
@WelderUpVegas2 жыл бұрын
Hi Chris, I have had better luck with the TH400. I think it is just a matter of preference.
@murraycooper5 жыл бұрын
Does tigging the gear on throw out the balance at all or is it too minimal to worry about?
@hoagiesherlin77325 жыл бұрын
Thats gonna be one bad MO FO
@skipman8yard5 жыл бұрын
More vidj like that please 😎✊🤟👍🇬🇧
@WelderUpVegas5 жыл бұрын
skipman8yard will do buddy
@justanotherguy96645 жыл бұрын
Stainless bolts - when will people learn...? Sure, they look real pretty, but between the head deformation and thread galling they are a PITA. Add to that the misconceptions about stainless grading and anti-corrosion makes for real fun times trying to work on vehicles that have had them added.
@bigrich21105 жыл бұрын
just another guy add a little anti seize compound and you’ll be just fine with properly torqued stainless bolts
@i-like-turtles49005 жыл бұрын
Loving the content! Notice more if it in the recent months...does that mean there isn't a new season of your show?
@oldblu825 жыл бұрын
Should weld that cam gear too
@jeffleblanc88505 жыл бұрын
Wish I had a welder maybe one of these days I got a old 95 with the low power 6.5 turbo diesel it’s good on fuel but wouldn’t take to the races if I had the money I’d put a Cummings in my Chevy but I’m 61 and the budget is not there I got to put some gaskets on my old diesel today thers a ton of oil down the side of motor I’m putting a used motor in and if I had the money I’d rebuild but it works good for what it is wish so bad I had the money to do a Cummins swap oh well you do some awesome stuff must be nice to have all the stuff at hand but you worked for it good video miss your show I don’t like the street outlaws it’s a soap I like good ole Nhra racing
@jasonvenegas82645 жыл бұрын
Awesome
@slamboy665 жыл бұрын
I hit it so fast only at 240p I'll wait till 1080 HD. lol
@jaredwheeler76165 жыл бұрын
What rear end and front end is in the D-rod? Thanks
@cummins53255 жыл бұрын
What size sticks are you running?
@ricklewis9505 жыл бұрын
Was this filmed a long time ago? It doesn't look like the most resent D-Rod I'm used to seeing??? Some one plz fill me in!
@stevekirksey92935 жыл бұрын
Steve ought to teem up with Dragon man aka toys R us he’s got a 67,000 square foot Museum up in Colorado
@krauselee8775 жыл бұрын
Filler rod prevents the weld from cracking dude
@joshsauto62265 жыл бұрын
Where do you get your motors from?
@oz-mospeedshop7845 жыл бұрын
Steve, WHERE do you get the cowboy boot style gauntlet tig gloves?? I’m about to cut up my Tillman’s and work boots, and break out my mommas sewing machine!
@ricklewis9505 жыл бұрын
I think he mAde them
@patmclean19515 жыл бұрын
The music over the video is a little much for my taste. I find that it works better over stills. I would rather listen to you guys wrenching away and the equipment you are using.
@426superbee45 жыл бұрын
i got 5 cars and 3 pickup to make some cool rides. but its TO DAM HOT > i can't work on em sweat pour down in my eyes 1st is a 85 ram got a 318 going to HEMI in it got a 89 FORD 4x4 pickup going to put it under a 85 ford E250 cargo van They measure up PREFECT
@joenels43565 жыл бұрын
put a vacume pump on the oil vent mo powa eh?
@bfit57595 жыл бұрын
Please work on the audio levels. They were WAYYYYYY to high on this video
@kendlechesson59375 жыл бұрын
Hi Steve Kendall from England I'm trying to buy some shares buddy can you help me out
@dougmtias31635 жыл бұрын
Foda demais
@bigunitandmore5 жыл бұрын
You ever use a torque wrench ? Unless that drill is a drill and a torque wrench both. LOL //////////////////////////////////