D11T dozer action, couldn't stand it had to come out!!

[@SebastienPrudhomme-uc8sc]

c est vraiment une bete de travail. et les rippers hate de les voir en action. merci pour tes videos

[@lessopinion9707]

I enjoy your programs. Thanks

[@rcplaytime]

looks and sounds amazing 👍👍 i need a dozer 👍😃😃🎄🎅❄️

[@motobuddy19]

I couldn't wait either Lookin' good , lookin really good !

[@seansrcconstruction]

Awesome video man..can’t wait to get back home and run mine. We’ll be another 2 weeks though. Be careful out there on your own, getting stuck in all that mud lol getting that thing out of there without the track on must’ve been easy but it cleared a lot of dirt

[@seansrcconstruction]

Hey how did you get the full sound kit to work without the smoke?

[@RueyMorris]

Killer Video, it can really move a lot of dirt. I notice it moves so much more faster than the DXR2.

[@yellowironcowboyrccon7484]

Yeah im loving it alot! Keep in mind the dirt is real wet and sticky. I can't wait to push dry dirt!!

[@bryangriffin2093]

Darrell that machine is wickedly awesome. I can't wait for you to push some dry dirt as well. I feel you made the right choice to sell your other dozer to get this one. I assume that it being bigger and heavier that the drive motors are more powerful than the DXR2

[@yellowironcowboyrccon7484]

@bryangriffin2093 I think the drive power is about the same maybe a little stronger, but the real difference is in the weight. Its 30 pounds heavier than the d10.

[@kevinerickson2595]

I been waiting 🇺🇲🎆🎇🗽i really enjoy this

[@TimBo8690]

Have fun boss 💯💯💯💯💯

[@Sublimescatty]

Most reliable and best bang for buck Excavator? Leaning towards the XDRC 945 5 channel from Toucan with the Paladin transmitter. I'd like to have the Kabolite 970-200, big fan of the front shovel but the price.

[@happyman8521]

Awesome dozer.

[@RcR.A.E.]

Snow melted yesterday from the rain finally not in the negatives hope to get out and do some clean up yard has just been a mess. I can still dig no problem I just get so frustrated cause you scoop a bucket then just hang it over the truck 😂it never falls out gotta use your finger or a stick. I have two buckets I super glued a chain in the back of the bucket to knock of wet material how they do with excavator buckets in the oil fields cause they have production down to the ton so a packed bucket would throw off truck loads and production.

[@ryanlagoda1352]

That thing is badass.

[@yellowironcowboyrccon7484]

@ryanlagoda1352 im really loving it! Cant wait for some dry dirt to push.

[@afraone]

Hello, I also have a D11T, great machine but I have a hard time keeping the tracks on. The valley that the rollers and the drive sprocket ride in easily fills with debris and then the track slips off of the rear roller. I thought about drilling relief holes in the track sections as is done on the aftermarket DXR2, tracks but the tracks on the D11T, are made of hard steel that my good drill bits won't cut. Have you had this problem, do you have any suggestions? Thanks for any advice you can give. Dave

[@yellowironcowboyrccon7484]

@afraone yes i did have a issue. The tracks didn't seem tensioned enough so i added a 1/4 inch thick nut inside where the spring pushes against. I haven't had a chance to try it yet but it made a big difference in track tightness. When my track came of i was in sticky mud, i had mud build up under the fenders lol.

[@afraone]

@@yellowironcowboyrccon7484 Thanks for your quick reply. I am now in the process of machining relief holes in the tracks on my D11T. The tracks are made of a very hard steel, regular drill bits won't cut them, so I used a two flute 1/4" carbide end mill to machine the holes in the track sections. I will also take your advice and install a 1/4" spacer behind the tensioner spring when I reassemble the dozer. The soil in my area is a mixture of very fine sand and clay, it sets up like concrete in the valley of the track where the rollers and drive sprockets ride, this allowed the tracks to slip on the drive sprocket and slide off of the rollers, my hope is the relief holes in the track will allow debris to be pushed out by the rollers and drive sprockets rather then build up and cause problems. Dave

[@yellowironcowboyrccon7484]

Well deffenitly let me know if the hole help!! I will appreciate it.

[@afraone]

@@yellowironcowboyrccon7484 I just finished up machining holes in the second track. Going to the hardware store tomorrow to get a clamp to make reassembly easier after installing the spring spacer. My yard is MUD now and will be for the next 4/5 months as soon as I get a chance to try the Dozer with the modified tracks I'll be sure to post here and let you know what I think. Dave

[@motobuddy19]

You should print up a cowboy hat for little Darryl in the cab

[@yellowironcowboyrccon7484]

@@motobuddy19 i should huh. See if i can find one.

[@CuzzieCuzz]

Sunday is funday... Did you get double time pay for working sunday... lol.. Love that dozer. BTW, do you ever sleep... Keep up the great RC videos.

[@yellowironcowboyrccon7484]

Nah didn't get paid squat. But it was so nice out i couldn't resist.

[@tony5247mittens]

Darrell you think the tracks will hold up? I will watch how the dozer run for awhile I think we will buy one,sold my 10

[@yellowironcowboyrccon7484]

@tony5247mittens so far they are doing great and this area is full of rocks. Yesterday i had a issue with a track coming off the ideler but do to the excessive mud i believe thats why it came off.

[@RainerCzak]

Great dozer with fine details. I'm looking forward to the durability of the drive. Are they brushless motors with planetary gears? Have fun in the dirt 🤠

[@sebastianRC-Mania]

😊😊❤❤❤

[@Dynoworksperformance]

Where did you buy the dozer?

[@yellowironcowboyrccon7484]

@@Dynoworksperformance Oliver hobby.com

[@SkeldZ06]

Do they come with Cat stickers, or do you have to add those yourself somehow?

[@yellowironcowboyrccon7484]

It came with decals, most do

[@rayclark7963]

Why does no one on the dozer ever back drag?

[@yellowironcowboyrccon7484]

I back drag when needed. When its muddy like it is its a waste of time

[@roberthunt8883]

Where did you buy your D11 ??

[@yellowironcowboyrccon7484]

@@roberthunt8883 Oliver hobby. Com

[@roberthunt8883]

Where did you buy the D11 ?

[@roberthunt8883]

@yellowironcowboyrccon7484 ok thanks really like watch your videos Wished I lived closer to join you.

[@yellowironcowboyrccon7484]

Oliver hobby. Com

[@yellowironcowboyrccon7484]

@@roberthunt8883 Oliver hobby. Com

[@tolstory]

toy

[@ronringwald5120]

Does your dozer blade, can it go in & out on either side to angle blade at all, love the 3 diggers in back.

[@yellowironcowboyrccon7484]

@ronringwald5120 no it doesn't do that. Large dozers typically wont. You will find 6 way dozer on d7 and smaller