D16 ARP head stud install without removing the head + 1000cc injector install

[@jamsoilder]

Very timely, I'm getting ready to do a head gasket on a y7...couldn't decide...but now, I'll just pop in the ARPs when I can afford them. Keep up the good work.

[@TexasHondaChannel]

Last hut on the right If your headgasket is bad I highly recommend replacing it before doing this install but this is a alternative if the headgasket is still in good shape.

[@jamsoilder]

@@TexasHondaChannel Gaskets bad and replacing it is a must...I just won't be using ARP studs initially.

[@ZBros817]

The most under rated honda channel out there! Keep up the good work!

[@TexasHondaChannel]

Garrett Chatterton thank you I appreciate that

[@mattstarnes2006]

Every video makes me giddy about when I start my build

[@TexasHondaChannel]

Matt Starnes I love editing them and posting them. Not much of a fan doing the recording but hope y’all enjoy it

[@mattstarnes2006]

@@TexasHondaChannel I think I speak for everyone when I say we are glad you do!

[@TexasHondaChannel]

Matt Starnes Well good to know!!

[@markstroud4956]

It must be nice living in Texas cause it makes it so easy to go down to Mexico for the driving portion of your videos. I mean that way you are not breaking any U.S traffic laws on your videos. cough cough.

[@TexasHondaChannel]

Mark Stroud yea Mexico is so close it really helps me not break American traffic laws.

[@veryfineworldmusic]

i have done this bolt for stud swap 1 for 1 also, it is fantastic and important. great vid!!! thanks tejas honda

[@codysmith3857]

Another mint video buddy keep up the good work and hope all is well with you and your family and keep living life to the fullest

[@smallweights]

Definitely up there as one of the better channels, u, 79th productions, boosted boys, cleetus McFarland to name a few, really good channel that deserves more recognition!!! Personally I think it's better than evvan shank's channel although I like some of his builds, b is for build is good also, can I recommend checking out Faye Hadleys current vid series with Danny the engine/machinist/engineer, really good info for budget builds/repairs, keep it going dude, also think MCM has lost its way now they have loads of money/sponsorship, builds have become far away from general Jo on the street builds, their first videos were excellent

[@TexasHondaChannel]

smallweights Thanks I appreciate that and I agree I have seen some other channels that need more recognition

[@smallweights]

@@TexasHondaChannel you have some awesome content though dude, I'd love to make videos but haven't a clue how to edit, I DIY build like yourself 3 project cars and a vw van, always working on something

[@moseseggmolesse6438]

Did this engine ever suffer head lift after this? Am considering doing head studs this way but unsure 😅 would you agree with this order? 1) remove singular head stud, starting in the middle 2) install arp stud hand tight 3) repeat with all 4) torque all down? Or do you swap step 3 and 4 and torque each one down as you install it...I think this is important to clarify coz if you're removing all stock bolts before torquing any new ones down then surely you'd want to start from outside heading in as not to warp the head

[@dpg_creative]

Just to clarify the torque staging process, you pulled each stock bolt one by one and replaced it with the ARP bolt and torqued it to 15lbs? Then went back to each bolt in sequence and torqued it to 30lbs & then to 60lbs? Or did you torque each ARP bolt directly to 60lbs? Awesome video! Thank you!

[@TexasHondaChannel]

Sorry i don't see a lot of older comments but the people of the internet have their ways of doing it but i have done it both ways, 1 at a time getting them snugged up then doing normal tq procedure and i have done remove all keeping head there then install and normal tq procedure. i would do the 30 then 60

[@dpg_creative]

@@TexasHondaChannel Awesome, thanks for replying!

[@joemartinez21024]

Bro that car is clean asf bro soon I’ll be boosted

[@TexasHondaChannel]

Crx Jojo Yes sir! I bet your happy to have the turbo I sent :)

[@EricTheGreat508]

Love it. Thing is freaking fast for a non vtec SOHC Honda!!! D series pride👍🏼💪🏼

[@TexasHondaChannel]

Eric For sure. Everyone say “do a vtec head” but I have never seen a y7 that has been built up I seen plenty of y8 or z6 or y7 block z6/y8 head. Never seen a fully done up y7 so that’s my goal!

[@gingersquatch9844]

If the pin inside the injector connector are the same you could have used a paperclip to swap the connectors in and kept things a bit cleaner.

[@Manniejr310]

Man I wanna see how much hp it makes. Keep up the videos man. I'm in the process of building a jdm d15b vtec

[@TexasHondaChannel]

SGREEFER310 You and me both. I feel like 300-400 area but never really know 🤷🏻‍♂️. It pulls really good and that’s good enough for me to be happy but I wanna see some good numbers.

[@veryfineworldmusic]

o like your work on the sled, great stuff!!

[@ogm19881]

Great video just an FYI I think using cloth electrical tape would of been better then that vinyl electrical tape for the injector clips.

[@danilosong9081]

no problem later? Is it not necessary to plan the head and block? when changing the head studs

[@tyferguson564]

Does the srt4 11mm head stud work with the y8 engine?

[@swiggynutmcgee2186]

I just found this video while I’m working on my own Honda so I don’t know what mods you’ve done to yours. What mods have you done? Asking for reference to see how much power my build could theoretically make

[@TexasHondaChannel]

Swiggy NutMcgee Idk what my power is at. I have the entire build here on the channel so you could see every mod done. It is a vitara build stock y7 head and cam, z6 intake manifold with type r throttle body port matched, 8lb flywheel stage 4 clutch, forged rods and vitara pistons OEM 75mm bore, block guard, GT30 eBay turbo, log manifold from amazon, intercooler kit from Amazon. 1000cc injectors/solid mounts.

[@reachmorelove4293]

Can the intake manifold from the d15b put on the d16y8 engine.

[@silence.speaks7000]

Yes

[@Regal_Civic]

Gettin some good comments James ! That's cool.

[@TexasHondaChannel]

stuart nordstrom Doing my best hope it’s enough!

[@amrmegahed4309]

Hi dear.. What is the brand of your 1000 cc injectors

[@kmsscontracting1186]

Thanks for the content just subscribed!

[@TexasHondaChannel]

KMSS Contracting thanks for subscribing! Welcome to the channel!

[@sinformant]

Those injectors are almost as loud as the direct injection high pressure pump on my cobalt, I say almost because the di fuel pump sounds like loose lifters.

[@TexasHondaChannel]

sinformant Jeez! I did valve lash adjustment while the engine was out so and it wasn’t that loud prior to installation i noticed they were loud so I figured I would point it out before someone says I need a valve lash adjustment lol

[@sinformant]

@@TexasHondaChannel yeah at idle the pump sounds like a clock ticking lol. It is right up on the motor and driven off the cam so im sure that's why it is so loud.

[@TexasHondaChannel]

sinformant Yea that makes sense. I seen them before

[@ricerlife8322]

What kind of ecu and tuning software are you using?

[@TexasHondaChannel]

Ricer Life Hondata s300

[@forsure276]

Dammm clean!!

[@TexasHondaChannel]

Flow Master Thanks

[@hectorvazquez3303]

Why you didn’t use the srt4 arp stud they are stronger

[@TexasHondaChannel]

hector vazquez These ARP head studs are strong enough for me. I have been using stock oem head bolts up to 30psi with no issues but these Head studs are much stronger than the OEM so I’m happy with it.

[@thatfiek3027]

Damn she fucking gets it🤙🏼

[@markc9986]

Stock block ?

[@TexasHondaChannel]

Mark Caacbay The stock sleeves but block got yanked and I put in my vitara build in. I did video of it.

[@centraltexascivic7299]

Mint brother. 👍👍👍👌

[@TexasHondaChannel]

Thanks!

[@centraltexascivic7299]

@@TexasHondaChannel no problem bro

[@samuelfoote9135]

You can stack springs if you have an 8 and 3 lbs springs stacked it'll be close to 11.

[@TexasHondaChannel]

Samuel Foote Yea I only have a few bigger springs no smaller ones.

[@Regal_Civic]

Keep it up James

[@TexasHondaChannel]

stuart nordstrom Will do

[@stroud61kyb]

Got my hoodie,sticker and air freshener. Sweet.

[@TexasHondaChannel]

stroud61kyb heck yea glad to hear!!

[@pondigrung8197]

Maddd

[@globaltripping3654]

The lube must be applied to both sides of the washer!!!

[@nbfelipe1662]

If u are near fort worth tx i have full d16y8 swap for sell

[@TexasHondaChannel]

NBFelipe Dang Yea I’m a few hours away and not in need of another engine currently.

[@nbfelipe1662]

@@TexasHondaChannel i was tboned and stripped my sedan

[@nbfelipe1662]

@@TexasHondaChannel kzbin.info/www/bejne/op7LdJ-iprCdj7s

[@cre8tivegarage157]

👍🏽

[@Acc3l3ratoR]

yeah...

[@TexasHondaChannel]

Acc3l3ratoR yeah....

[@jossv746]

0 to 60 time? 🙂

[@TexasHondaChannel]

josefsvensson 4seconds but could be better with that elusive traction

[@jossv746]

Yeah I heard those wheels scream all the way to sweden 😂

[@athaothao2880]

d16 arp head stud automotive racing products boost up ok

[@dirtybuiltgarage4081]

Are You still on stock head

[@TexasHondaChannel]

Chris Fearless Yes for now

[@marley91crxsi82]

Hell ya james my brothere party time 😏

[@TexasHondaChannel]

Marley91crx, SI For sure man 😎

[@hondad-series9265]

Save the time if you would have just spent 10 bucks and bought OBD1 to ob2 injectors connector