D9G Roller Installation

D9G roller installation, I bought all these parts from dmcwearparts.com they gave me a great price and support when I needed it.

[@Jpaydirt]

Need undercarriage at an affordable price call Kody at 605 840 8082 or just send him a text and tell him thanks for helping paydirt out dmcwearparts.com

[@Hat9757]

You can run “tests” till the cows come home, but the real world is where the rubber meets the road. If the fellow from Ingersoll is so proud of his product, one would think he would show greater interest in understanding/resolving the problem. Then again, maybe he already knows the marketing department got creative with the specs! Great videos!

[@johngibson3837]

I would of thought he'd want it sent back so it could be checked out, so much for been proud eh

[@13eckerlosmuerte]

Ingersoll has gone downhill, we bought a new mobile air setup for a 40lb jack hammer and the hammer fell apart within the first 2 hours of use. Both bolts unscrewed themselves completely then the air compressor began to have issues where the countdown for glow plugs was short and it would crank no start til the battery died. You had no way of holding the plugs a little longer like an 04 model with a key where you could override a shutdown. We fixed the manifold on the older model and left the new model with our superintendent. Let's just say the office was pissed we hated it.

[@marklowe330]

As a machinist, I always enjoy taking new parts, usually expensive parts, and modifying them.

[@truckindudeglen524]

"Homemade loaf of bread with legs". I just about snorted coffee out my nose. You gotta give fair warning on stuff like that Jeff!!

[@tobyhaiste1497]

Man I always enjoy your brand of honesty, tell it like it is Brother, you're preaching to the choir. Oh, and the content of your videos is pretty dang good too!

[@jimcrowl6925]

The Engineer from Ingersoll should have said, unless I missed it, hey that switch is bad so and so will be contacting you today about us making that right. Then they could have had that one back for testing and given you a new one. We all know there isn't much of a chance that that is ever going to happen... Nothing beats real world testing. Maybe Harbor Freight will want to sponsor you. Keep up the good work!

[@Nick-nw6zg]

Jeff , I do believe that it has earned the respect to be called Harbor freight now💪🏼‼️😂😂

[@Jack_Rabbit71]

hi Jeff. H/D mech here, in my 30+yrs exp, air will always win every time. I've also found as you probably know, inch gun with long anvil won't have the same grunt as a short one. Thanks for the video and good luck puttin the ol girl back together. God Bless

[@Failure_Is_An_Option]

LMAO... Expects to be taken seriously while casually mentioning god.

[@Jpaydirt]

So the long anvil ingersoll electric claims even more torque than the short anvil model, they claim it makes 3,000 ft. Lbs 😮 hows that work🤷‍♂️

[@johnfry9010]

That Mic is awesome , the sound is perfect !

[@wayoutwest4944]

IR's Winnegar probably sits in an "Office Space" like cubicle, and doesn't have the authority to bring any expenses to the IR company. He probably as team leader stacked the design papers up in a neat stack, but has probably never worked on himself a fastener bigger than what you find on a swing set or bicycle. Your test was right on. As a shade tree mechanic have a small made in USA IR air compressor. Thanks for providing the information.

[@bombardier3qtrlbpsi]

Just an idea... Next time hook a chain hoist or a come - along to the crane cable. You will know the rest. Soon the D9 will be pay her own share. Nice job 👍

[@cut4fun50]

You are a very talented guy 👍 I don't know how you put up with the " know it all folks " . Especially about the impact deal. Love you're channel ❤ have nothing but respect for everything you do. Pat from northwest WI

[@charleswelch249]

Jeff you know all you need is JB weld to fix the threads 😂😂😂. I figured I'd get that in there before another armchair mechanic in kindergarten did 😂😂. Great job on the video and showing the truth always leaves hurt butt's. Hope you get your bolts and taps soon so you can be done with that part of the repair.

[@glennbrown1961]

Jeff wins....again! Used that nickle antiseize by the boxful on some big jobs when I was working! It's great stuff. Keep up the great work re assembling the old cat. G'day from Tasmania

[@garybulwinkle82]

Let's be realistic! That old CAT will never come apart again! When we're gone, no one will care or know how to do this stuff anymore!

[@tomyousch7070]

I’m glad I never sold my old IR air drive 1” impact and try and replace it with battery power. And I agree it’s convenient with no air hoses to stretch out. But if you have to anyway.

[@Sircraig7963]

G'day Jeff, Really enjoyed the vid, I agree with you , its hard to find good men who will go out of their way to help nowadays. So looks like you fell on your feet this time. Jeff wins again. Lookin forward to the following episodes in this series. Respect...!

[@ChrisHarding-lk3jj]

Increased air pressure absolutely increases the torque capacity of impact guns. What peaked interest in the correlation between air pressure and torque with pneumatic impact guns was watching my friend trying to rotate his tires on his duramax pickup. This was probably 10 years ago and he was using an earthquake 1/2" drive impact and he was unable to remove the lugnuts with the gun. He then took the jack handle and placed it over a breaker bar for leverage and the snap-on breaker bar broke before the lugnuts. I walked over to his air compressor and it was shutting off at 125 psi so I removed the cover from the pressure switch and adjusted it to shut off at 150 psi and he was then able to easily remove the lugnuts with the impact. So after coming to the conclusion that more is better when it comes to air pressure and impact guns I decided to see how much is better. I decided to increase pressure 50 psi at a time as I tried to tighten or break varying sized bolts. The test subject was a brand new earthquake impact that top of the line at the time and air pressure was supplied from a composite wound high pressure gas cylinder and it was filled with 6000 psi of compressed air. After 200 psi I decided against holding the impact by hand so I hose clamped a piece of angle iron to the handle of the impact and I used a length of 1\16" steel cable to activate the trigger at a distance of 8 feet. I made a loop around the trigger and used a pulley mounted to the angle iron to change the direction of pull. Torque output noticeably increased each time the pressure was increased by 50 psi. The highest pressure I achieved through the impact was 450 psi and the impact exploded after 2-3 seconds of operation. My regulator was rated for a maximum regulated output pressure of 2000 psi and It would be a pleasure to test pneumatic impacts up at 2000 psi.

[@Jpaydirt]

Wow, that's interesting, so I should put 30 volts dc to the IR

[@ChrisHarding-lk3jj]

@@Jpaydirt What model Ingersoll Rand impact do you have? I have the 9691 which is rated at 3000 ft lb of nut busting torque and only 2200 ft lb of tightening torque. When I was deciding on which w9000 series impact to purchase I was comparing the w9491 with the w9691 and I was trying to figure out why the w9461 only had 2600 ft lb of nut busting torque and the only real difference is the 6" extended anvil. My guess is that the added weight of having the 6" extended anvil aids in breaking loose fasteners.

[@firstlast-ty4di]

When you threw out that bottom roller bolt, I was sure you were going to find a hole that had been reworked where a regular bolt wouldn't fit all the way down. I'm glad that I was wrong.

[@chenderson4969]

Classic response to IR. There’s a place for electric tools but they don’t replace pneumatic. Cheers Jeff

[@bobstratton6362]

Thoroughly enjoyed the video. I saw you needed some help but you got done before I could get out the driveway 😂 torque is torque!

[@matthoward923]

Jeff around here I use remote control grandkids to operate things like the crane. I’m getting to old to jump in and out

[@garybulwinkle82]

Remote control saves the day!!!

[@thomasshaffer8547]

Great idea!

[@Fatamus]

Stop 🛑 it’s hammer time 🎶 Great video Jeff Going to try to make a cold start next week The snow is still knee deep to a tall assed eskimo. Jeff Wins Again 👍😁

[@ohhpaul7364]

If you are anything like me, I bet you figured out the quickest and easiest way to grind those snap rings down right around the time you got down to two left to do. Maybe the front will fall off of that Ingersol and they will tell you to take it outside the environment, that seems to be where his conversation went. thanks for the videos, Jeff.

[@joshjones3408]

An well bring it back no matter what it takes...... 😆 Great video 👍👍👍 jeff

[@richardlincoln8438]

Thanks for sharing the trials and tribulations with Ingersoll Rand. I was very impressed with the " we are Oh so proud of our product " that tailed off into excuses. If you were the litigious sort, all the video of Your hand, arm and wrist injuries from the sticking trigger switch should make Your lawyer drool. I have been enjoying the videos very much. Thank You Jeff. Best Wishes to everyone at Anderson Construction. #JeffWins

[@LukeLong-oi4uc]

Great content. Seeing those roller frames off brings back memories of digging out broken bolts.

[@slypig24]

We use to use a Trouqe multipler. Industrial size, to extract very stuck bolts in mining, Cone Crushers. Worth a look..

[@thebegrsshow]

I knew you were addicted to "Picking Things Up, And Putting Them Down" when you bought the 336. Now look at yourself, you got a Crane, and you just can't stop...🤣

[@Digginok]

Sounds to me like Ingersol needs a call from ole Roy D

[@Jpaydirt]

I was thinking about seeing if you and B could maybe use them for those footings, for that mormon hospital that doesn't serve coffee your working on

[@davestuart6593]

Thx Jeff,I do enjoy your time spent and your honesty! Don’t listen to the BS ers there a dime a dozen and as long as they don’t have to look you in the face they’ll say just about anything as long as they don’t have to back it up

[@markbulva4188]

I say if they claim that itll put out 2400 and it doesn’t do it then stand up for yourself and scream from the mountain top. And if they won’t stand by their product then out them on every avenue you have including court. Don’t let ingersol ram rod you

[@Failure_Is_An_Option]

Awwww.... the trumptard cancel culture.

[@cew995]

I’m in full agreement on antiseize

[@Failure_Is_An_Option]

That it does nothing? That you have never tried grease and achieved the exact same result?

[@CaptainRon13]

You are right, torque is torque, from the first bolt, that battery is not at 100% capacity. So your torque numbers change. Batteries operated tools are convenient. They don’t require as much support. But if you have a big job, better bring the air, or AC electric.

[@richardgauthier2155]

Like your mic set up. Anti sieze for the win!

[@greggb1416]

Sooooo, Bill Winecker engineer extraordinaire, with “Ingersol Rand”…, so proud of his creation…, but wouldn’t get you dialed-up on a repair on the sticky trigger..? Hmmmmm. Kody…., owner of DCF track roller company, takes an “F’ing” call (from most likely an unknown number), while lying on a beach in Hawaii, sipping mixed drinks, and watching bikini clad women…, and gets you all dialed-in on your rollers. There you go…, it don’t get much better than that. Great video sir, Thank you. P.S., the mic is awesome…, no wind sound.., and I know it was howling…, stand-by it’s about to howl like hell tomorrow…

[@wvrockcrusher]

Enjoyed the video as always Jeff. You would think that dude from Ingersoll would have jumped all over the trigger issue, and asked questions about the problem if he was so proud of that impact that he supposedly engineered or whatever. Most of those guys like that are full of it. The guy you called about the roller problem didn't seem to waste any time with an answer. Goes to show the night/day difference about somebody who knows something, and somebody who just is just a condescending a-hole that's only about image projection, and nothing else. I tried to help out with the rollers Jeff, but my arms weren't long enough! You should have gotten Mr. Griffy to run the crane for ya. 🐶I'm sure he would take a 🦴as wages.

[@jamesflett1887]

I bet ingersol wishes you Never bought that impact gun. “ oh dam the trigger is sticking again, it does that”😂 calming saying it like it was designed to have that problem 😂 excellent video as always, thank you

[@robertquast9684]

For putting bigger bolts in the rock guards you could possibly get 12 point headed bolts for a smaller socket size or socket head. If they were 1” bolts to start with running a 25mm drill in there might be challenging as it’s going to be pretty close to hole size. Good luck Jeff will win

[@spadelugs]

my gosh, back in the day we always used to run a three-quarter line right out of the compressor tank with a ball valve dumped about an ounce of oil down the air gun and hope for the best. The difference between a good day and a bad day was a bolt coming out. Milwaukee’s the same thing they always got some kind of gremlin lurking in them. They all circuit boards. You don’t know what they’re gonna do makes you pissed all that money.

[@fredscott9090]

love the way u call it like u see it on these impact guns.keep up hard work jay.

[@sheriffroylambifs894]

THE MOST INFORMATIVE ~ THIS HAS TO HELP ANOTHER OPERATOR uh TON ALSO !!!

[@JoeyToth-ti9tp]

I worked on a 46A that was wobbling in the Ocean and the roller frame bolts were never taken out. We used a 21 ft. Pipe to break the bolts loose,but broke all 56 bolts off and used a magnetic drill press to drill out the bolts and had a welder blow out the rest and chiseled out the rest to the threads. What a mess and then used never seize on all the bolts when we put it back together.

[@fredboiton7893]

You may wanna put a chain hoist between the crane line and the rollers. Gives you ease of adjustment and less back and forth

[@lukeabendroth8157]

We run Milwaukee at my job. If you change a Cat 24M cutting edge with a one inch electric the edge comes loose in a 12 hour shift. If you hammer the same edge on with a one inch air gun they stay tight. Electric is handy with no cord but some jobs I think air hits harder and tightens more. The torque on the cutting edge is only 800 ft lbs but if we torque them it’s guaranteed to fall off.

[@Jpaydirt]

well that's not good

[@craigclemson9642]

Get a hold of scrappy industry diesel creek friend he put remote control on his crane worked great good stuff Jeff

[@mikeembrey9176]

Great video real repair testing in the field 👍🏻🇺🇲

[@robdixon945]

Thanks for the show Jeff 🍻 🇦🇺

[@AJKandK]

Jeff, you could use a sand blast cabinet. Makes it a lot easier cleaning all those parts up.

[@darinwilson8663]

I've been using sleeve inserts for years on bottom rollers and have never had any problems and you get to use the original size bolts.

[@richardhoneywell7411]

Great video Jeff always enjoy watching you work on this undercarriage for your D9. Looking forward to your next video stay safe Jeff.

[@kjinohio5897]

You can always take your bigger bolts to someone with a surface grinder and they can grind smaller hexs on the head if you need the clearence. I've done it myself before.

[@johngibson3837]

Be cheeper/easier in a mill

[@chrisj2848]

Good for you Jeff doing your own test with the IR. People like their stats but you're right, if it doesn't work then it doesn't work. 👍. What a pain with those snap rings, you might as well just cast your own friggin rollers from scratch next time.

[@jameskratzer2014]

Mr Griffey is building up a strategy to claim that fluffy wind guard on your remote microphone. Be careful where you set it down Jeff 😂

[@russellsmith3825]

Really like the audio quality of that DGI wireless microphone. ETA: for jobs where you need a bigger volume of air, don't laugh, but maybe you should look for a used propane or anhydrous tank to use as a volume pot or accumulator closer to your work.

[@sawboneiomc8809]

If your ever in that situation again trying to put something down wile in a crane....get some barn twine and run it to the cab and you can pull on either side to adjust them wile your letting them down.

[@darinwilson8663]

Would love to have a couple of those worn bottom rollers for our d9g, I have one with bad bearings and can't find a used one anywhere and a new one would never last if put under there with all those worn ones. That is a hell of a job for you to do alone. Be careful out there by yourself!

[@LYEARTHMOVERS]

DCF rollers are good i have used them for years!!!

[@AJKandK]

You can get antiseeze in rattle spray can form, too. Make applying easier.

[@michaelmcclure8673]

Mr Paydirt, that battery powered tool was not full power because it was cold out . Lol got to make a comment. Great video. 👍

[@jamescole1786]

4/21/24..yo Jay PD, Am not a diesel or HvyEquip guy but watch & learn from you & many of your 'Dozer' guys that perform this work ( ole' Warren at Western Truck & Tractor, C&C, Diesel Creek etc). You are relaxing to watch & listen to your .. Idaho? ..well measured speech & humor. Seems you have figured out best utilization your 'new' IR Cordless/airless Battery ++Torque Hammer Impact tool. I was plesantly surprised at HbrFrt tool results, but glad it did whst you need...cant have D9 undercarriage bolts 'fallinout' now can we? Ok...looking for yur next video. Stay safe & carry on!💪⛓️🪝⚙️🍺😊

[@thomascrawford7942]

Rigg a chain hoist from the hook of the Crain instead of that lifting chain. then you can position the load then lower it into place with the chain hoist.

[@broncobill_]

Man jpay you had me rolling on this one…..

[@rebelyank6361]

I've found the aerosol never sieze works well and is much quicker and neater to use.

[@localcrew]

Kody sounds like a REAL real businessman.

[@curtisharlan9230]

Good morning Jeff

[@hrholden4262]

If I lived nearby I'd come and give you a hand in return I'd just want you to let me do a decent pass when you were operating it, I'd love to have a go on a old school D9

[@poorfarmerlogger]

Enjoying your rebuild videos Jeff. You do a lot of work by yourself and I appreciate the effort and energy it takes to get these jobs done by yourself. Have to tear into my D7e before to long. I have a final drive that’s lost some teeth. Think it’s coming from the reduction gear but haven’t torn anything apart yet. I don’t have the tools so may have to call in some help for this one unless I pull the sprocket and cover off as a unit and assess from there. Curious if you have used any of the aftermarket final drive parts. Costex(CTP) is substantially cheaper then cat. I have decent luck with their stuff in the past but you’re always wondering if it’s a mistake when you put the order in.

[@jasondoucette4642]

Definitely hard worker Jeff that lot of work by self

[@rbmccloskey]

Jeff, put a chain fall on the crane hook for fine adjustments.

[@BZ1340]

every time you use that background music. i wanna cha cha cha.🎉. Just seems to fit the videos so good. Like your bad ass drone music short did

[@mikejohannsen9407]

On your air guns put a little bit of air gun oil before and after you use them them things will last for ever I was told that by a master mechanic I work for . Never had any problems with my air guns , just regular air gun oil , little bit goes a long way

[@Failure_Is_An_Option]

25:56 TTC has capability to test both directions. I have not watched in a while but I know they have tested left hand before. Just a matter of changing the bolt. Think they were using 1" hardware. Not sure how common a left hand threaded nut and bolt combo are. One think I learned from TTC is the time it takes. Peak torque frequently takes 15 or more seconds. That's a lot longer than most of us hammer on something.

[@clydeacor1911]

I enjoyed your comments to the IR guy😂.

[@matkremzar5474]

beast= engineer talk for im on a different planet. engineers are on a whole different end of the factory nowadays .. if not a whole different adress.

[@gibbsey9579]

Would be interesting to do a breakaway torque test on the bolts after tightening them with the Ingersoll...

[@merlev7983]

Hey Jeff, You should contact the guy on Torque Test and see if he wants to test it. maybe he would even fix it for you 🙂

[@Failure_Is_An_Option]

Clearly you don't know what you are talking about....

[@frblmtn8238]

Sounds like Project Farm needs to do some testing on the big impacts!

[@Failure_Is_An_Option]

Of course you watch that clown.

[@meirionevans5137]

Next project: remote control for the Galion? PS, gonna need a bigger tub of anti-seize.

[@williamgleaves1954]

Jeff, at 39:57, look at the bolt to the right of your wrist. It doesnt appear to be bottomed. That might be the one that didnt turn iwth the Harbor Fright. It might be hydrolocked meaning that theres too damn much antiseize in there keeping the bolt from tightening. If i were you, i'd take that bolt out, clean it and the hole.

[@Jpaydirt]

I see what you are looking at, I'll take another look at it, the holes are open so I doubt it's hydro locked

[@rickaser2383]

Regarding your bolt repair, did you consider allen head bolts to avoid the too big of head inside the guard structure? Cannot understand why Ingersol didn't want the gun back for eval...sounded kind of high and mighty to me....thanks

[@watchthe1369]

Ya know the Ingy rand sounds like a pooter, and the harbor freight sound like a gut dumper on fast forward? That might sum up the real difference in "Performance"

[@pi1797]

Awesome video. I wonder if you took some kind of wire brush, big enough to fit in the holes attached to a drill. Clean them out and see if that helps before you commit to re threading them.

[@philiphorner31]

You could weld a smaller nut to the bolt head hex.

[@iamrichrocker]

just before you approached the camera and stated.." i need help"..i was thinking.."Jeff needs help"...

[@patrickt4384]

Very interesting! They all are. IR needs to send you a new gun. Good night

[@TronVila]

Made by a different company 😂

[@frankryder9325]

Great test on the IR compared to HOBO just think if you had a HOBO air compressor you would hav stripped all them bolts LOL !!

[@LYEARTHMOVERS]

Brother the one near the idler wheel is suppose to be single not double. And love your videos they r always awesome!!!!

[@LYEARTHMOVERS]

We r fixing always as one single two double then one single two double again and in the last again single

[@Jpaydirt]

Not on a d9, 🤷‍♂️

[@LYEARTHMOVERS]

@@Jpaydirti have 9g and 9h but we always put like that. Cuz the say not to put double roller near idler

[@ACatKrom]

FWIW I would have fixed the track guard holes before putting on the rollers, so you could get a mag drill in there.

[@franwilson2097]

you got to love people Jeff

[@MrAndy406]

Looking good, Jeff, are you gonna paint the under carriage, love the content. Keep up the great content. 🍻

[@tonymidkiff2108]

Great video Mr Griff approves

[@kurtrindgen4708]

Tight enough on the German scale, guud-n-tite.

[@Jpaydirt]

I thought that was a german virgin LOL

[@819John]

So I'm no scientist, but it seems to be about converting electricity in to rotating power. Through the compressor the Hobo has a lot more electricity to turn into rotation-moment of torque-than the little battery in the IR.

[@patriot2164]

yeah but ...... Jeff , it was cloudy day , and it's supposed to be sunny warm 89 degrees with no wind ! on the third tuesday of May ! LOL Love the internet keyboard experts

[@joelgardner9840]

Jeff, all these idiots will whine and complain about anything. Real world use/durability is what ultimately matters. Companies will do anything to sell a product. Keep up the best videos on KZbin.

[@therealidaho6094]

you need 2 try and get that video of your impact 2 Ave

[@bigbird2100]

Great video 👍 Maybe be that rand engineer should share how they measure their torque because they all measure differently 😅😅😅

[@knowltek]

I’m the klip grinding an wire brush king..I can put rollers on anything..c Mon…😂😂😂..🎉🎉🎉..cheers MR Anderson

[@johngibson3837]

Hey up mate when you said of needing help was wondering why you were using the lovely Gallion rather than you remote control service truck good to see that you switched over later, also why not change those clips did kody not surgest that, anyway another good video thanks and good luck with that fool from inger/rand

[@MarkSt59]

The question that needs to be asked of the engineer from IR. The cad modeling is great however did he actually ever operate the product? Jeff what is your experience with copper based anti seize if you have used the product?

[@Jpaydirt]

Dad used to use it, worked fine. I use the silver stuff on exhaust studs, and when I want to look like the tin man LOL