XP15000 Printhead Removal

[@Jocetheangel888]

Oh Sass, you saved me! So easy to take off with that one screw🙂

[@frankiedave2265]

How did she blow the print head just asking because mine is just printing yellow and cyan

[@keytoncreation]

I took apart it and followed the video, after rehooking it It powers but there is nothing on the screen. I was wondering if there is a tamper button that has to be pressed while turned it on

[@leahdunavant9114]

I can’t get my magenta or black to print and now my ribbon cable has black and magenta ink all over it what should I fo

[@gasawayelizabeth9683]

Hi ran across your great detailed video but have a question about soaking the print head.. Do you sit the whole print in the cleaner don’t want to ruin anything?

[@dorothybrown7952]

Thanks for sharing. I’m trying to fix mine.. no prints yet.

[@reddirtroadz]

I followed your instructions on a newer XP15000. Now my printer won't print and I get an error on the vertical alignment. Any suggestions?

[@tee-botheewok716]

Do you know the xp-15000 head part number for replacement?

[@paulajan2441]

love it, Thank you. Please posting in 2nd part of putting back in.

[@ssvcustomtransfers]

I will be uploading part 2 shortly.

[@queennsorriell7664]

What about error code 000052 and big skipped lines in image

[@almapatterson6408]

do i need to change from sponge carts to epson refillables

[@chillworksdev4145]

Sent you an email regarding XP15000 issues I'm having. I look forward to your help, thank you so much!

[@ChelseaBaird-f7k]

Would a dirty printhead be the culprit for grainy and totally off color prints? Asking before I take mine apart!

[@ssvcustomtransfers]

If it is grainy prints I would look at the graphic 1st. If it is less than 300dpi it is to low resolution.

[@ChelseaBaird-f7k]

It is 300dpi. I'm using CadlinkV10...I've tried everything I can think of. At a total loss!

[@carmine0957]

I need your help. How do I contact you?

[@paperlady1513]

Hi I followed this to take our my printhead because it is not printing white. I cleaned it and put it back in. When I turned it on it had error code 033007. I read it could be moisture so i let it sit for 3 days and I still have error 033007. Any suggestions?

[@smokedog7730]

First, use the Epson button to power off the printer, and then unplug the device. Let the printer sit for at least 24 hours, and you should be printing normally again. If you're still getting the error after letting the printer sit for a day, try letting it sit for an additional 24 hours, or even longer. Be careful not to let your printer get too dry-make sure the lid is always closed. Otherwise, you could clog the printer with dried ink. If you’re a more technically-inclined individual, you may want to remove the cover and clean the cables, checking to see if any cables are loose. Put everything back in its proper place and run the printer as normal.

[@NewkiwiNews]

I have done everything you have. Before cleaning it the nozzle check wasn’t Uniform, it wasn’t printing right… Now it doesn’t print at all 😅 I don’t know what’s happening. I took a lot of from the print head.

[@valeriediaz7147]

did you find a solution to fixing your printer?

[@lidizeesparza2360]

hi, where can i find a original and new headprint of xp15000?

[@HelmetVanga]

The manufacture (EPSON) is where I would look for.

[@dorothybrown7952]

How do you soak the printhead once it is out.

[@ssvcustomtransfers]

I use a plastic cup cut down to the hight needed to have the cleaner just cover the bottom of the head.

[@joshepseo4751]

Do you know the nozzle diameter of the xp15000 model?

[@ssvcustomtransfers]

Sorry no

[@opportunitydsign]

Hi my xp 15000 give error 033006 can it be that the printhead is the problem

[@ssvcustomtransfers]

That usually means your main board is fried. Death sentence for your printer in most cases. You can try to let it dry a few days and see if it will come back.

[@aslcreations9826]

I got 031002 do I need to replace print head?

[@nikkismelcer6652]

What are you using to clean the print head?

[@ssvcustomtransfers]

Printhead cleaner. You can get it here www.southernsassvinyl.com/products/dtf-ink-film-powder-and-cleaner-direct-to-film

[@redbarntiedye]

Thank you!!!!!!!

[@dalebrown2128]

Do you still have 1800 for sale

[@ssvcustomtransfers]

I do. And there is a small sale happening this weekend. www.southernsassvinyl.com/collections/dtf-converted-printers

[@brittany7535]

Where can I find this part if you don't mind me asking

[@ssvcustomtransfers]

Printhead for the XP isn't readily available. I found 1 on Alibaba but it was like $230 with 45 day shipping.

[@brittany7535]

@@ssvcustomtransfers Thank you

[@gurnay1973]

Link please for Buy. I not find this product un alibaba

[@ssvcustomtransfers]

@@gurnay1973 it's not readily available. You will just have to search for it. Look on Ali Express and eBay also.

[@gurnay1973]

@@ssvcustomtransfers amigo encontré varias como xp600 pero me indican que debo actualizar la placa. Sabes a lo que se refieren ?