Casting reels require some periodic maintenance so here is how to quickly keep the Daiwa Tatula 100 casting like a champ. #bassfishing #daiwa #castingreel
Пікірлер: 39
@timtweet8149 Жыл бұрын
Great advice! I did a complete clean, oil, grease and new line during the holidays. Thanks for taking the time and using the KISS principle.
@wskwsk67365 ай бұрын
Thanks, mate! I have prepared my Tatulas for the season using your tutorial
@MJ_Bass Жыл бұрын
I'm ready for the reel maintenance nazis to show up, "you didn't clean it properly!" Thanks for the quick maintenance tips, I tore one all the way apart once and said never again. I'll send it off to a pro vs taking all that time. That quick maintenance is probably all you need for years with a weekend anglers use.
@JohnCrews Жыл бұрын
😂 you got it
@gvidasgi24806 ай бұрын
I mean, yes, basic maintenance is all you need for years especially if you only fish weekends and have more than one combo, but the thing is the spool is always spinning on 2 bearings not one. :D Also if you fish in a dirty water a lot of junk will collect close or and on worm gear, this place also deserves occasional cleaning.
@brianperry4521 Жыл бұрын
Simple. Quick. Easy. Good video John!!
@21jsfleming Жыл бұрын
I enjoyed the noises..good effects
@JohnCrews Жыл бұрын
😂
@majesticog92813 ай бұрын
This helped me more than you know. Thank you!!!
@alex_darsen2 ай бұрын
That ZPI oil is really great stuff. I use the same, but don’t forget a little on the spool ends.
@richardporter1455 Жыл бұрын
A dime works good to pull that screw if you don't have a flathead handy.
@JohnCrews Жыл бұрын
Good tip
@JesusFreakLive Жыл бұрын
Love your videos John !
@daveversion2.29 ай бұрын
One thing that makes bait cast reels to make noise is lack of lubrication at the end of the spool shaft that butts up against the spool tensioner knob.
@Basedgod_Ай бұрын
Awesome video man! Thanks
@binkwood Жыл бұрын
You should just launch your boat and go fish the Classic and see what happens! Love the rigging videos!
@JohnCrews Жыл бұрын
😂
@craigyost12405 ай бұрын
This was a great video!!! My tatula is also one of my work horses. I went through and did these little things and it's a night and day difference in noise and smoothness. Maybe you can tell me how to tighten up the guide that rides on the worm gear? Mine is loose and when I cast, no matter if near or far, it rattles terribly and I have no idea how to correct it. Would LOVE any tips or advice. Thanks!!!
@martyaustin6545 Жыл бұрын
Great job buddy, I throw them on Cashion Rods
@JohnCrews Жыл бұрын
Same here!
@greenpighunter6930 Жыл бұрын
Just the single bearing? There's another bearing under the tension knob supporting the other end of that shaft.
@JohnCrews Жыл бұрын
Not for my quick line. In the full maintenance, it needs oil. Thanks
@MrWeezy-zz6ou Жыл бұрын
Hey John... do you ever upgrade the stock bearings? Or put a set of those tricked out bearings in your Tatulas?
@CheeNO_007 Жыл бұрын
Have u experienced any problems with the handle not engaging after a cast? Recently purchased the tatula 300 and sometimes after i cast the handle doesn’t engage the thumb bar having to spin the handle numerous times. It’s also making loud grinding noise when Im retrieving line. Any ideas? Tia.
@JohnCrews Жыл бұрын
I’ve not had that happen but just got a 300. I’ll keep an eye for it
@juli82E Жыл бұрын
So sometimes I think the grease settles or the factory doesn't put enough. PunchFishing has a good break down video on the tatula 100 that should get you through greasing a 300. I had the same issue on a tatula 100 I had, works great and is silent now.
@larrymor17 күн бұрын
When is the "off season"?
@alejandroquiros29109 ай бұрын
Planting different oil like Lucas penn
@6rantfishing7 ай бұрын
I can't adjust the brakes on the outside now it's like there struck
@Nateconleykayakfiahing6 ай бұрын
WeeeeeEEEEEeeeeeeee!! 😂
@brandons9536 Жыл бұрын
No brake system inside that you can adjust?
@TGossOutdoors8 ай бұрын
The brake system is the numbers knob where that flathead screw is. Only way to adjust it
@wattson6469 Жыл бұрын
I’m new to baitcasters and my cast literally go like 20ft out. My breaks are set it like 6 and I move the tension knob until my bait slowly goes down. Still only cast like 15 to 20 ft, and I birdnest more than half of the time. Really frustrating to master
@rLh43432 ай бұрын
Appreciate the info, but get someone to film for you when you are trying to show detail applications.
@chestophercolumbo4561 Жыл бұрын
Can you use this reel for flipping & pitching?
@BrandonAdams1010Ай бұрын
use Tatula 150
@MnHondaSi Жыл бұрын
Can I use my gun oil!
@binkwood Жыл бұрын
...and kind of a chicken shit tip on reel lubrication; you can take a can of aerosol white lithium grease with the extension straw. Flatten one end, insert the straw in the rectangular hole directly under the "worm gear" in the reel. Lightly push the trigger of the aerosol can of white lithium grease as you slowly turn the reel handle. White lithium grease melts off much quicker than true grease made to lubricate reels, but it's a hell of a lot easier to spray grease in a reel than it is to take the reel apart and apply grease properly!