Such smoomoth and nice narration. Need a cup of whiskey to go with this tutorial and some country music too
@Offroadfarm12 жыл бұрын
Thanks for watching!
@spencerb1750 Жыл бұрын
One of the best tutorials I've EVER seen. Thanks so much for your time and effort put into this video for a axle noob like me. This made my d60 rebuild a lot less daunting to take on
@Offroadfarm111 ай бұрын
Thanks for the kind words and thanks for watching!
@feed_defend_evolve Жыл бұрын
Building a 4x4 e350 van. This vid is GOLD!
@Offroadfarm1 Жыл бұрын
Thanks for watching
@JamesLongOnGoogle3 жыл бұрын
This is a great tear down video. I really appreciate you taking the time to shoot & edit. Helped me out a bunch with my Dana 60 hanging under my old Jeep.
@Offroadfarm13 жыл бұрын
Thanks for watching
@alexmunich864 жыл бұрын
You sir just gave me the confidence to do my own rebuild. Thank you for the video tutorials!
@Offroadfarm14 жыл бұрын
Glad you found the video helpful, good luck on your rebuild. Thanks for watching
@samkorbyn16923 жыл бұрын
You all probably dont care but does someone know a way to get back into an instagram account..? I somehow lost my login password. I love any assistance you can give me.
@kristophernicolas51953 жыл бұрын
@Sam Korbyn Instablaster :)
@samkorbyn16923 жыл бұрын
@Kristopher Nicolas Thanks for your reply. I found the site through google and I'm trying it out now. Looks like it's gonna take quite some time so I will get back to you later with my results.
@samkorbyn16923 жыл бұрын
@Kristopher Nicolas it worked and I actually got access to my account again. I'm so happy:D Thanks so much you saved my ass !
@zachthompson51134 жыл бұрын
going to be doing this on my 81 K30. Mine is not going to come apart this easy. So jealous of you guys that don't have road salt. Thanks for the video!!!!!
@Offroadfarm14 жыл бұрын
Thanks for watching and good luck on your project.
@noahgaray79234 жыл бұрын
This is a super in depth video. I will be following along as I replace the Passenger side U joint in my 88 F350s dana 60. Thanks!
@Offroadfarm14 жыл бұрын
Glad you liked the video. Thanks for watching
@teewoods98463 жыл бұрын
thanks for sharing this video. i appreciate it.
@Offroadfarm13 жыл бұрын
Glad you enjoyed it! Thanks for watching
@endless_potatoes3 жыл бұрын
Fancy ball joint remover, nice tip with the castle nut
@Offroadfarm13 жыл бұрын
Thanks for watching!
@gabrielarechiga704 ай бұрын
Do you have a parts list with all the parts you used for the rebuild?
@forrestgumpp68013 жыл бұрын
Great video 👍
@ronsre-creations52894 жыл бұрын
Great Vid !!! I just found that moog makes these lower adjustable king pins for the DANA 60 for first gen dodge's. Their instructions are vague at best. Can you add some detail about these adjustable king pins on your reassembly video. Thanks....
@Offroadfarm14 жыл бұрын
I went with normal bottom kingpins when I reassembled the axle. I know this will affect my camber but I don't really care since this truck is not going to be a daily driver and won't see a lot of highway miles. I never could find a lot of information on the adjustable king pin and sadly can't really offer you any advice. Thanks for watching and nice looking dodge
@Mike-xn1bh5 жыл бұрын
@Offroadfarm, thank you for posting this vid! Is the installation procedure the same for the Ford kingpin 60, as well?
@Offroadfarm15 жыл бұрын
Mike, it should be very similar. google "dana 60 bible" it has information on all the different Dana 60's
@naifalshehri78394 жыл бұрын
Hi buddy,im from saudi arabia and i have custom deluxe 30 (k30) with dana 60 front end,can i replace the rear and the front end with the g80 4.10's?,do they fit?
@Offroadfarm14 жыл бұрын
I'm not sure. I would reach out to offroad design. They know just about everything when it comes to squarebodys and should have an answer for you. Good luck and thanks for watching
@phantomwalker82513 жыл бұрын
chevy used up scale f100 calipers,,instead of f250 calipers..
@billhopper89613 жыл бұрын
what model ford did you say that axle is from
@Offroadfarm13 жыл бұрын
88 Chevy! Thanks for watching
@irvinroadman5043 Жыл бұрын
@@Offroadfarm1 chevy and dodge dana 60 are the same
@seemslegit1915 жыл бұрын
Do the inside and outside bearings have races
@Offroadfarm15 жыл бұрын
Are you asking about the hub? If so, yes. I'm going to reuse my wheel bearings and didn't knock those races out
@phantomwalker82513 жыл бұрын
all bearings have races. or ride on hardened surface,like f150 axles bad idea,. & spindle bearings.
@phantomwalker82513 жыл бұрын
selector switch???.no you dont need remove the screw..
@phantomwalker82513 жыл бұрын
you didnt ruin the bearings,it went no where,,just brake clean then light oil. done..
@Offroadfarm13 жыл бұрын
True, I could have just cleaned them. But, I decided to just replace them since it requires a near full teardown to service these bearings and I already had it apart. Thanks for watching
@zip78064 жыл бұрын
uhhhhhh. Pressure wash before disassembly...
@Offroadfarm14 жыл бұрын
I did pressure wash it twice! Granted it was before I pulled it from the truck. Thanks for watching