Danby Countertop Dishwasher Questions Answered

[@jimmyloveshair]

Thank you SO much for the video. I have watched lots of videos on this. Yours is very helpful! Thank you again!

[@LatitudeSky]

Very helpful, thanks. Got one of these machines on the way to me and this video answered a lot of questions. I use a faucet-end water filter so back pressure should be OK. But I can see, I won't be able to use my filter and this thing at the same time. That's going to take getting used to. But at least the dishes will get done. No more disposable plates and flatware.

[@moosai]

It’s been a few months now of having it and I’m still really happy. I found out if I only use hot water it will successfully use the the dishwasher “pucks” and they work so much better than the powder detergent.

[@SimonTekConley]

I replaced my faucet just to install a portable washer. I love it

[@Sarahlouiseas]

Well this video saved me $200 for hiring a plumber and replacing the tap because of the filter and fork trick :) thx

[@moosai]

Awesome! I love it when we can figure out little things on our own

[@killa8800]

How do you reset it mine won't turn on

[@MCscarfacematt]

it is very easy to set up. i set mine up with one hand and no instructions the valves on the first faucet are garbage, the sacrifice you make for style. the leaking at the adapter i found it was the gasket in the adapter that was the issue for me and i didn't have it tight enough at first. ive had mine for 5 years, the only issues im having are, now it wont drain. it worked fine for the last year on the 50-year-old faucet at my new house the first faucet at the old house was 100+ years old and broke the day i moved in so it was already a new faucet when i hooked up the dishwasher. like i said i had the same leak at the adapter i took it off flipped the gasket and put it back on using vicegrips to get it tighter than finger tight just make sure lefty tighty doesn't become lefty loosey because thats a whole new issue

[@msmuhammad1003]

It doesn’t fit on my my countertop or under my cabinets. I had to make a ugly thing to move it around the kitchen.

[@AustinHargett39]

It's technically still clockwise to screw in it is just upside down.

[@mohitkumarshah4880]

This works for the faucet shown in video but if you have pull-down modern faucet then this aerator won’t work. I found the solution after trying several connectors/ adapters. You would need 1. 6922 GARDENA Accessory Adapter and 2. Sioux Chief tomahawk /// LFA-677 937-733020101 Garden Hose 'Adapter | Adaptador | Adaptateur.

[@donnabechtel4224]

Add another washer in the adapter, should stop the leak. No tape needed. Ask your local hardware store for aerator washer.

[@rachelcournoyer4792]

I bought one and i received it 2 days ago, i used it tonight but the stuff was but yet, I do know why it didn't dry, it's a damby too I think like yours and the book it's write to put at 4 for dry but I don't have to bottom for that, what I gave to do for have my dishes dry?

[@nat.serrano]

How does it drain? I use the same faucet for my water filter. Does it drain back to the same faucet?

[@annperreault5747]

so sorry 4 U I don't understand, this part went really well I mean sink adapter,,now I,m mixed up with the cycles, I feel so ashamed , meaning dumb It worked so beautifully,,,got to check if it was moved to close of wall, have fun with your new dishwasher I still love mine.;)

[@oliviawoodworth9812]

can you run this while your not home or would it overflow?

[@pixiesanchez9195]

I was wondering I’ve got a counter top dishwasher but was wondering as I live on the 3rd floor and I don’t want to annoy my neighbour as they’re lovely people but I moved my fridge ontop of my freezer leaving a space under the kitchen unit and I want to put my dishwasher there but I’m not sure what I need to do to prevent it damaging the floor or even disturbing the neighbours any suggestion like do I need to put something under it like wood to prevent any damage to the floor any suggestion I would highly highly recommend ❤️

[@kefka1911]

I have the same dishwasher in the video and its quiet AF. If they can hear it then you need to tell them to get the fuq out of your apartment cuz thats the only way they'd hear it

[@joanba78]

@@kefka1911 ☝🏾 BEST! 😂

[@-jaydee-]

Hot or cold water ?

[@miijjk]

I have a model number dws-t05 and I cannot find where the soap goes there's no indent at all in the door no one knows anything about this dishwasher at the countertop dishwasher

[@balamstudios]

VERY helpful. I couldn't damn figure out how to hook it up

[@djangodave3953]

Just use bar soap . Like zest or ivory and rub it on the threads it will seal it for you

[@sharidanstamp9319]

We bought this model a year ago. The rack has now started to rust. We contacted Danby and after a frustrating back and forth I was told that there is only a 90 day warranty on plastics. I cannot begin to t ell you how insulted I was. It took 2 days for me to reply. Imagine a 71 year old grandmother having to tell Danby that plastic DOES NOT RUST. Needless to say Danby is off our good list and I plan to let the company that sold me this piece of junk know about it.

[@davidjones5569]

Why my dish warsher licking

[@arianeedwards9947]

Thanks

[@ThomasandApril21]

God can anyone find the reset button

[@keknittle]

These all seem to be made by the same factory in China with different front doors. I have a Danby Countertop dishwasher (DDW631SDB) and the yellow supply connector accepts a dishwasher connector kit. Only need to buy three things from ACE Hardware. (Dishwasher Supply Line #4061180 $25.99, 3/8in Repair Valve #4309399 $14.99, Add A Tee Adapter #4309001 $12.49). Supply 2nd: To use the same supply hose but cut off the end and add an extension. (1/2 in. Barb X 3/8 in. Comp Brass Adapter #4000473 $6.99, 3/8in Stainless Steel Supply Line #4058681 $9.99 , and a Hose Clamp #41143 $2.59). The drain side: You have a few options, pull the bottom of the dishwasher off, pull the gray hose from the drain connector, unscrew and replace connector with (3/4in barb coupling #4568242 $2.79, 3/4in Vinyl Tubing, dishwasher tailpiece #43783 $7.59, Tailpiece Washer #44373 $2.49, and two hose clamps #41143 $2.59). Drain 2nd: You can also size down to 1/2in (1/2in X 3/4in Barb Coupling #4568259 $2.39, 1/2in Braided Vinyl Tubing #4315503 $16.99, Dishwasher Branch Tailpiece w/ 5/8in outlet, Tailpiece Washer #44373 $2.49, and two Hose Clamps #41143 $2.59). Drain 3rd: What I did to use the same connector, cut off the end and add an extension. (1/2 in. Barb X 1/2 in. Barb Galvanized Steel Coupling #41763 $4.99, Cut to measure 1/2in Braided Vinyl Tubing #4027603 $1.79/foot, Dishwasher Branch Tailpiece w/ 5/8in outlet, Tailpiece Washer #44373 $2.49, and two Hose Clamps #41143 $2.59). I made a hole in the stainless steel sink and run the lines down under the sink through a Bulkhead ABS Slip x Slip fitting to make the hole nice.

[@denizenofclownworld4853]

That's not the 'wrong type' of faucet, it's just a worn out shitty one.

[@averymay6831]

ootensils