Рет қаралды 96,503
#danbyappliances #portableac #installationguide
Portable AC Install
1. If installing into a horizontal slide window, ensure your window is between 28 6/16 in. and 54 15/16 in.
2. Remove packing straps with scissors and lift packaging. The manual is contained in the intake/exhaust tube.
3. Assemble as many sliders as necessary to fit the window.
4. If the window opening is less than the minimum length of a single slider, use the slider with the hole in it and cut it to the correct size. Use the window slider bolts to secure the window sliders at the proper length.
5. Cut adhesive foam seals A and B to the correct lengths and attach them to the window frame.
6. Insert the window slider kit into the window opening and close the window to secure it in place. Cut the non-adhesive foam gasket C to fit the width or height of the window and insert it between the panes to prevent outside air from entering the window.
7. If desired, install the security bracket with two screws.
8. For a hung window, attach the air outlet adapter to the exhaust pipe and rotate it 90 degrees to secure it.
9. For a hung window, attach the air outlet adapter to the window's slider kit. You are now ready to use. Continue to Sliding Window Installation.
10. For a sliding window, assemble the exhaust adapter by combining exhaust adapter parts A, B, and C.
11. Attach the exhaust adapter onto the exhaust hose.
12. Always press the release tabs on the clips to detach them
13. Attach the exhaust adapter onto the window slider kit
You're now set up for use! So keep cool with Danby all summer long!
Visit our site for more information!
www.danby.com/
► Be sure to subscribe to our page for more videos like this one, as well as new product launches and exciting partnerships!
► Follow Danby on Social Media for contests, product highlights and more!
Facebook: / danbyappliances
Twitter: / danbyappliance
Instagram: / danbyappliances
Pinterest: www.pinterest....