Lace Up - Marvelous Designer/Clo3d Tutorial

[@browsetube4366]

Best teacher of MD/clo3d in KZbin.

[@1020aaron]

Im an apparel sportswear product developer and I use Clo3D all day everyday at work and your videos have definitely helped me with this program.

[@CryptoManSam20]

Half of the videos out there are just video without instruction. You're the best.

[@Richard68434]

Damn Daniel! Back at it again with the tutorial!

[@Pugwash.]

I've watched a few of your videos now and find them damn fascinating. Your attention to detail and explanations are great.

[@JonRowlison]

Great video. If you ever revisit this, don't forget that you need that one straight piece at the very bottom or very top where the lace strings across at the origin. :)

[@KikiNiNyaa]

At 15min, you say to use the mesh select tool to arrange the laces. This is a really awesome tool, and I will be using it more now. However, I found better results with laces by just using the gizmo tool and rotating each as desired prior to simulation. Thanks for all the tutorials you've posted! I feel semi decent at MD b/c of you.

[@ГраньНочи-к9м]

truly a magician of marvelous designer

[@genkidama7385]

true master of laces

[@MakaylaAyy]

Thank you so much for this tutorial, it was beyond helpful for someone who has never used Clo3D before!

[@KulturIncision]

This was super helpful and an awesome walk through - I followed along and it worked!

[@meadow-maker]

Hi Daniel, you mentioned somewhere about lasso too. I'm sure you said you didn't think you could. I found it by mistake. Double click on the tool and it becomes a lasso, only a straight lined one, click drag, click drag, but it will help selecting in an awkward place. Oh, and I use deactivate sewing all the time now. It's great if you want to find which bit is causing the issue in a complicated area. Deactivate the sewing bit by bit. I'm sure you're too well organised to need it. :) Not watched the vid yet. Saving it for later. :)

[@olivierlebaillif5574]

Just discovered your channel and in a couple of videos learned so much of the things I have been struggling with. Great Job! Many thanks

[@LensAndMotion]

Best and precise tutorial. Great Job Man!

[@zeinaissa6975]

i recently discovered you and i just want to say I appreciate you and your channel

[@rasztyscompany95]

Thank you so much i was having so much trouble with laces self colliding and you solved it fast and easy. I'm learning so much from this channel it's crazy.

[@maddiekarlsen]

Great tutorial, can't wait for more! :) Can you also make a tutorial making a detail long jacket.

[@somtoton]

Ur all tutorials are very helpful...can u make tutorial on rendering how to achive realistic render?

[@MariaMaria-oc8sn]

Daniel, YOU ARE AMAZING!!!!

[@davinsaputraartandgamedev9453]

Amazing workflow Daniel!

[@yeimmytorres1709]

For those who have problems with the strips that are not completely smooth, they should unstitch the side that was interlaced, simulate and then sew again and simulate again.

[@cameliahadizadeh8241]

I've need this toturial.thanks🙏

[@uFreaky]

these comments are so wholesome :)

[@blackswan6386]

do you have astore ? just amazing

[@NelietaMishchenko]

Great stuff! Managed to make my first lacing and it looked pretty good for a first time :)

[@funjokes-video]

How do you move the fabric without getting the holes with you (5:36)? I have tried it all, but it fails all the time.

[@strappingbyamber6765]

Did you figure this out. I am stuck here too

[@Prince_EssVR]

Thank you so much!! This helped a ton and now I can have my dream outfit for my VRChat avi :3

[@berylbilici]

U are talking just super cute !

[@courtneyrivenbark9359]

After I create an ellipse for the grommet and add the vertical center line, when I right click to just select the ellipse, there is no option to fold angle.There's only the fold angle option when I select the center line. Can you help me with this?

[@christophercrowell7263]

22:56!! How did you rotate that without going into your menu!!?????

[@kristinakyrychok3958]

that's completely genius, tnx you so much!!!

[@AntiDX]

Waoo I've been plagued with this problem for more than one year!! Really thank you for the tutorial!!!❤

[@shaghayeghza6724]

Super helpful. Thanks

[@latinkaellis152]

😍🥰🤩😍🥰🤩 Thank you!

[@sibelsaracoglu1919]

you are amazing man

[@AR.Studios.Animation]

Wow I saw this dress he made on a Instagram is was amazing

[@fatemehghasemi6304]

I'm too sad did't watch all your videos ! :(( Now you removed them. You explain details very well.

[@saffronvalour9467]

hey Daniel, how about copying one front lace set alog with the small circles and just duplicating them which matches the corresponding holes? wouldn't that be easy? instead of sewing all one by one

[@ajloveslotr]

This is perfect! Thanks 😊

[@michaelvaughan2986]

If you pick an average width for all the lace then just use Shrinkage Weft in Simulation Properties you don't need to adjust the actual pattern widths

[@harukohayakawa3027]

This was so helpful. Thank you!

[@muglermugler5590]

You are the best! Do you think MD/Clo can be a good modeling software for accessories such as creating shoes? if you can go over making hard objects in clo with your creative mind it could help! thanks again you deserve the best.

[@Daniel-qq6il]

Shoes? no. But certain hard surface modeling like large pieces of armor can be done, and it's actually really interesting (but not very efficient) . I'd like to make a video on hard surface modeling with MD/Clo in the future

[@muglermugler5590]

@@Daniel-qq6il thank you for your attention! Can you recommend a good 3d modeling software to create shoes, jewelry and other accessories that I can later import to clo and combine with the clothes? I found a few videos on youtube of modeling bags in clo, what do you think about it? Thanks again man

[@bambino3624]

Thanks buddy!

[@minmic144]

to fix the folded strings you can just redo the sewing line and make sure its parallel :)

[@michaelalvarez6019]

hi, my problem is, i need to make a hole for the laces, because i need to export the model in 3d applications, i tried manually connecting the laces to each other, the problem is when i am simulating, the connections are getting scattered, i dont know if i need to adjust some settings on the fabric,. thickness, or collision. it just scatter always

[@raihanchowdhury9261]

Looking forward to make shoes.

[@marilymollier2788]

Waooo thank you !

[@sudolisaaAJF]

Hi Daniel, I am having difficulty of seam joint at the hole always. I am seeing your simulated sewing is custom angle at string and hole joint, and front and back string shows line connected with turned seam. Can u advise how string can be custom angle sewing at internal line?

[@JustDebz]

Thank you for sharing your knowledge!

[@meadow-maker]

You've mentioned sublayers quite a lot. I'm on MD so don't have them, are they not just like saying I'll have layer 10, 20, 30, 40..... then then add layer 11, 21, 22, 31....? As I said, I don't have Clo so I don't know what what they are all about. I like the sound of Clo and looked at it first before I got MD (not even knowing the connection) but I always render in Daz Studio so, I'd be worried about losing those options.

[@ВиолеттаЯнгубаева]

Thanks 👍

[@mzita]

wow Daniel i was waiting for this, thx;)

[@PracticalLeigh]

Thank you. 🥺

[@zikimed169]

Sir Please make videos for beginners from the first step

[@SQWEKERZ]

For keyboard noise get RTX Voice, works brilliantly.

[@SaranjivacSRB]

Some great tips! When is the next tutorial? I see you haven't posted anything in 3 months :(

[@Rananh90]

thank you!

[@bcrossb100]

Where is the setup of the parts of the lace up skirt?

[@AxelF1067]

Hi, maybe you know, how modelling shoes in Marvelous (Clo3d) I'm not understand, how made rubber part, and how this part, connect with other parts. (Sorry for my English)

[@alyks497]

I guess the best way to model a shoe (especially the rubber sole) is by polymodeling and not actually using Clo3d/Marvelous.

[@Daniel-qq6il]

Alyks is right, polymodeling is your best bet. I've modeled some shoes in Clo and it CAN be done, but it's not worth the extra effort. I really hope it's something Clo will give us more tools for in the future, because I think there is serious potential for doing modeling like shoes, but the tools just aren't there right now.

[@AxelF1067]

​@@Daniel-qq6il Thanks for answers. (make shoes in 3ds Max or Blender)

[@minhlong9009]

Would you please let me know Set sublayer seam what to do

[@karrlanderleathergoods635]

Super!

[@rubelrjf5209]

nice

[@lixiong9990]

good~!

[@marco_cp_2133]

ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

[@HeyItsCinnabun]

Daniel hello, i know a better way of twisted sewing. Go to your edit sewing and left click and click flip on one thread and then go to the other side and left click and flip that one as well. your threads are crossed. your welcome. much easier.

[@kalepegg]

i dig what your doing but i dont see why your doing this