PART 2: (The Replacement) Hot Toys Delorean Time Machine review, unboxing Danoby2

[@DocSmizzle]

Great close ups of the modifications you made to the wheels. All things to add to the list of projects. I am most interested to see what you do for the back vents. Thanks for sharing your ideas.

[@CoryB_1980]

This was a really fun video to watch! I'm definitely interested to see your ideas for the display and how it will work.

[@trueCinemaniac]

DAMN Danoby, I F**kin love your upgrades. I wish I knew how to wire and do stuff like you do, the results are damn spectacular. I want to do all the same things to mine. Mad respect to your killer Delorean Mark II. Green with envy.

[@robscofidio9580]

What a beauty! Outstanding work D2. Thanks for sharing all the details!

[@jorgenlundin8100]

speaking of Blade Runner.... i wish someone would make a 1/6 scale Spinner

[@loualiberti4781]

OMG another Victim of Danoby2 !!! Do not send him any more poor Deloreans !!!

[@DeLoreanTECH]

Great job with the mods! Certainly more screen-accurate. I literally just returned mine today. Fingers crossed for a speedy turnaround from Sideshow. It was heart-wrenching having to disassemble and re-box it 😞

[@blackbirdtech3368]

Glad you got a better replacement and love the mods you made to the vehicle. Looks much better!

[@Do_i_amuse_you]

There is no doubt in my mind that I'm going to attempt to do my own upgrades on my delorean. Great job!

[@shanedisspain416]

Looks Amazing 👏 Looking forward to the next video

[@supermankelly]

What. You got 2 shipped before I've even had my one. Come on Sideshow! 😮‍💨

[@TheHYPO]

Looking at how the wheels are assembled/wired for light, does spinning the wheels (i.e. rolling the car) actually twist up the wire or is the part the light strip is attached to somehow fixed while the wheel spins around it? Do we have to be worried about rolling the wheels?

[@DannyDHidalgo]

Nice modifications, well done!

[@Single_Songwriter]

Looks Awesome Danoby ... love the engineering you do .. i think you should add those cob lights to the thrusters to mix with the factory yellowish ones .. Great Video Mr.Scott 👍👍

[@rebooting80s]

Awsome break down on the engineering of the car. Good thing Hot Toys has good customer service. 👍

[@inigo_gil]

Looks really cool, but you should have used an airbrush and Matt or satin black to paint the top covers. To get a more smooth finish. Also, I’m pretty sure the reason why HT made the wheels lighting that way is because that way you can see light in the main way people will display the car. Other way you will not see any light unless you made a custom base and display it low, seeing only the floor glow. About the hover system hinge, it’s really a shame and a concerning weak point to have in mind for customers. You are helping a lot with that.

[@Danoby2]

You do know Hot Toys included an acrylic base that tips the Delorean on the side to show vehicle underneath.👀

[@inigo_gil]

Yes, but I’m sure everyone will display the other side. I like accuracy, like you! Only pointing the reason I think HT have done that. Love your videos BTW 😊

[@TheAztec010]

Great mods, but at the end of the day you broke the other Delorean (RIP) Weather caused the damage? Now that had me laughing for a week!

[@2NDCBT]

Bro, that had me cracking up as well. How he kept pushing that "Temperature" theory! I guess the collectors in 'cold" states are screwed! It's a good thing mine was shipped in a temperature-controlled container ship with armed guards in heating suits and placed into a Temperature controlled Fed Ex truck and sent to me on a warm day! 🤣🤣🤣

[@EricDoggett]

Hey there! I just got one of these a few weeks ago! Do you think it would be difficult to mod the power switch so it's always on via USB? I'd like to connect the usb power to a standard smart plug so it will turn on and off via HomeKit. I can get it to turn off, but the power button has to be pressed twice to get all the lights on. Thanks! Love the mods you have done so far (and the stand is much better I think than the included angled one).

[@Danoby2]

Difficult yes, you'd need to hack it through a backdoor to keep it on all the time. Say the wheel light, send power through any of the wheel lights and it'll stay on and off as desired.

[@EricDoggett]

@@Danoby2 Thanks for the quick reply! hmm - maybe already past my skill level? :) I thought I could unscrew the the plate over the switch and somehow just bypass the switch completely so it was always on. I was using the standard USB power jack underneath.

[@Kal-el23]

Surprised they gave you a replacement after drilling a hole in the last one lol

[@davidlees9096]

Where we are going we don't need roads just a display stand

[@chip3579]

Great video and outstanding job 😎

[@minmo18]

The steering wheel is damaged, so I want to replace it, but I don't know how to disassemble it. Is there any part that you can take apart?

[@8bitflea]

I just need to figure out how to turn it on with a remote and a different stand.

[@davidjames1389]

Love the brighter lights, but not sure about the gorilla glue all over the struts. From what others have said, simply loosening the screw in the corner relieves all the tension and any risk of breaking them.

[@Danoby2]

Gorilla Glue was meant for longevity, years down the road how will the struts behave. We simply just don't know. Thanks for watching.😬

[@aqwblue275]

Would love your thoughts on sideshows deals lasting longer than you originally predicted. From what I’ve seen they are hyper focused on getting rid of dead stock but ignoring deals on things released post late 2022. Do you think they’ll cave if those figures sit long as well? Or do you think they’ll hold stead fast?

[@overthehype2390]

Great job on the moss!! I wish you can do mine for me. Lol

[@drvais]

How did you get the green liquid inside of Mr. Fusion? Drill a hole or is it possible to remove that container piece?

[@Danoby2]

Mr Fusion unit pops off and I added lights. 😬

[@o.g.5584]

How do you make the stand?

[@2NDCBT]

Okay, I will admit that I love your Enginuity! From a fellow collector and model builder, you did a hell of a job! I still think that you are a bit rough. Lol. You really dig right in there. Theory: Back the screws out on the hover assembly. One on each side on the 'receiving side'. Hot toys torqued down on them to tightly, Thats what I found caused the stress lines. I backed them out four turns. Seemed to help.

[@Danoby2]

The ship had sailed by the time the recommend advice on loosening the screws. The extra thin layer of gorilla glue with a flat black paint did the job. My latest mod the rear thrusters were a bit more complex but overall came out as intended.😁

[@pollomaz6205]

Does this one still have problems when you try to roll it ? Like if the wheels are too tight

[@PlasticCrackCollectibles]

I ordered this because of this video. Awesome Vehicle and updates you've done! 🤙

[@obsidian1710]

Danoby, a little off topic from this video... but is there a preferred fix for figures when the skin sort of splits? My Ted from the Blitzway Bill & Ted has some rips on the skin sleeve at the elbow. Or is my best option to just take his jacket off his waist and put it back on to cover the arms. This was a great video by the way!

[@Garnnnett]

Looks good. Do you will change the flux capacitor light too and add light on the table buttoms roof? Some ideas that also you can add: little device steam humidify connected with back vents and sound of engine car noun

[@sixscalemafia]

Such an amazing job. Well done!

[@DannyDowd-fq4pm]

😂 I loved the Alvin and Simon voices, but all I can say is, Simon no one likes a smart ass. 🤣

[@cougarfarmer]

This a way cool channel!! I feel like a kid looking at the Sears Catalog, toy section.

[@je5tersd3ad]

Looks freaking amazing, sick mod on the tires.

[@MrAerialsound]

Very Nice--wish you could bypass the button under the hood

[@luissalazar5788]

Hi, Do you have any tips on how to remove the hood?

[@Danoby2]

Why would I want to remove the hood?

[@luissalazar5788]

@@Danoby2 So that I can get it signed and not have to take the whole car to all the conventions

[@havenmotel]

Would love to see displayed with figures inside while hovering!

[@uksith]

Great stuff Danoby2. I've not got the balls to mod mine but I can always show this vid to others of how it could look😜

[@ashgaming7045]

I hope mine is not broken because I didn’t have a chance to open mine to inspect it yet and it’s past the stupid 30 days

[@spaulagain]

Glad your new one is ok. But I'm pretty sure you trying to roll your first one is what caused the break. The lights are done by wire which can only twist a little bit before causing resistance and place torquing force on the hinges which stressed the plastic and fractured it. They should have had a warning label to not roll, but I presume it couldn't in the first place based on the complexity of lighting and flight mode of the wheels.

[@jespernicolaj]

Amazing work. You're really good.

[@mrwaitlist2057]

HT definitely missed a trick with the lighting on the wheels. However, even though there’s some cool ideas here, the lighting mods are not for me and feel somewhat unnecessary.

[@someguy8523]

That's pretty impressive work congrats

[@dop22gaming]

What base are you using? any ideas of a cool base for the hover conversion? the one that came with the car... not the best

[@Danoby2]

Ideas are flowing, but not a fan of the included one.

[@Rob-z7k]

The intro of this video made me cry! So do you recommend the Gorilla glue apoxy on the wheel axles?

[@alucardxx142]

You are awesome, where did you get the base, how do I get one

[@Danoby2]

the base was custom made for me by a close friend. :)

[@thejoyofboxing8805]

Awesome modification

[@CollectorsEntity]

Great Mod thanks for Sharing 👍

[@davidz2016]

Great job .

[@Danoby2]

🙌😁🙌 Thank you.

[@Kal-el23]

What rotating stand is that?

[@Danoby2]

It's an old $40 battery operated rotating model display that no longer works so I use it as a lazy Susan.😬

[@Kal-el23]

@@Danoby2 nice!

[@dskyeproducer]

Hey there. I just got my DeLorean this week - no breaks (so far). Enjoyed your mods though I have no skills to do such a thing. But then I got to the end and saw the stand. I know you’ve answered others that a friend made it but, um, can I get his or her email?! I’d like a stand to display mine flat the way you did in the video rather than on an angle (plus I’m not sure I trust the stand that comes with it!)

[@dashrendar655]

Well done 👍

[@austincrafton178]

Congrats on your replacement. But I noticed there's several panels of your car has missing paint dang it .

[@Danoby2]

Didn't see any missing paint on the panels.🤷‍♂️ Thanks for watching.😀

[@austincrafton178]

There very small but it's obvious.

[@ghambino1]

Beautiful job my friend.

[@forever-a-collector]

Awesome mods. The wheels look amazing. 👌 wheel wells aren't bad as well. Are you able to bring them back to their original position?

[@floydwilliams8847]

Did you keep the other one.

[@Danoby2]

Had to return it.

[@_z4ch4ri4s_]

Interesting.

[@Danoby2]

Glad you think so!

[@LocoLu526]

Yes !!! Let’s go

[@I_O246]

I guess my big question is, is the car stuck in hover mode since you gorilla glued the struts?

[@Danoby2]

Nope. Still convert back and forth. I did off screen testing.😉

[@waldopepper4069]

i don't think you have to do all this redesign, rejigging and rebuild to jazz inc items. they seem to arrive in a finished state........

[@lewismartin4306]

A before and after mods video would have been nice

[@mr.momcollectibles]

Fantastic video! Sucks your replacement still has some issues but glad you got it correct prior to the issue being pushed. Great mods man 🤙

[@ekwon4764]

I couldn't care less for back to the future but wow that looks fantastic. I have to say, this is what hot toys should have made, not the subpar shlock they rushed out.

[@briandavies8351]

I’m shocked

[@hotrod3769]

Hello Danoby2.

[@Danoby2]

Hello.👀

[@8474Starscream]

🔧 🔨 🗜 well played sir.

[@EL-FIERRY]

You don't deserve any replacements after the modifications you made. Unfair!!

[@minmo18]

🙏 pls help

[@megacolor1105]

that plastic material is soooo cheap!!

[@wolff6988]

Basictly this thing is crap?i pas on it, keep my money on maybe N1