Iv learned more in these couple video and the frame relay ones than i have in my whole year doing my HNC and CCNA at college wish i had known about Dan last year but hey ho be sailing to the top of the class no probs. Cheers mate and God bless ya !
@AppleFanPari13 жыл бұрын
Excellent way of teaching. Highly appreciated. thanks
@LouisGPiano11 жыл бұрын
Thank you very much for your videos, you are a very good teacher! Best Cisco tutorial!
@MickeyDJ111 жыл бұрын
Excellent, clear and meaningful. Would enjoy more!
@anjaneya212 жыл бұрын
all well explained tutorials on networking, appreciate your work.
@jesperjensen15318 жыл бұрын
This is some really great videos, Dan! Thanks a lot.
@ayedabboushi722111 жыл бұрын
awesome video ever , plz keep these videos on , part 5 is missed!
@famfeld9 жыл бұрын
these videos are perfect for my level of learning right now. Anyone know of any others like these? No number 5? Thanks, Dan
@karthick140911 жыл бұрын
Easy to Learn, Worth tutorial Videos Thanks a lot Danscourses!
@swilson200111 жыл бұрын
I created my own network but couldn't figure out why I couldn't ping through another router. Your description helped me out by describing next hop.
@tnadolecki12 жыл бұрын
Hi, first of all thanks for great video. I have a question though : Why in previous video 192.168.1.100 when pinging was showing "network unreacheable" yet in this part I see exactly same scenerio with 192.168.5.100 but when pinging it shows "timed out" (it's minute 4 of the video) Would appreciate your response. Thanks
@danscourses13 жыл бұрын
@HoermN Thanks!
@edwardesmalin878411 жыл бұрын
the best tutorial about network. . can i ask a question where do you get the 0.0.0.0 number sir, is it standard to use 0.0.0.0 when jumping to other router/network sir?
@ramborambo43839 жыл бұрын
seeing the previous videos..was expecting more clear explanation on static routing.or is there any other video where static routing has been expanied in detail???
@chi465210 жыл бұрын
Love your videos Dan! great tutorial
@themhd198512 жыл бұрын
Please can you put more videos, they're awesome and very helpful.
@tnadolecki12 жыл бұрын
I think I just answered myself on this question - there was no default gateway set on 10.0.0.1
@swilson200111 жыл бұрын
You are the man bro! This definitely helped me out!
@devil2005iscool11 жыл бұрын
no i mean to say, is the network limited to only 56kbps? which is super slow. what would be a realistic clock speed to allow fast interconnects between networks, as this would only allow 1 client on the other network to use the network as if more people used it the network woudl come to a crawl. how fast can you set the clock, how fast is a serial link capible of and why use serial and not just another ethernet or fibre?
@vinaykumardisha12 жыл бұрын
really great videos... WELL DONE MAN would be great if u can post more videos on that
@ciscobatais65302 жыл бұрын
Great work keep it up with many thanks to you
@devil2005iscool11 жыл бұрын
but is the network then only limited to 56k in speed?
@andrewpacheco725911 жыл бұрын
i have a question, why didnt we set up both routers with one static route each? we have one static route on router 0 but with router 1 we put two individual routes to each pc network. why is that?
@tee2datop27510 жыл бұрын
i believe this is to let us know how to configure routers with two different methods - Static routing and default gateway routing
@tee2datop2759 жыл бұрын
To avoid the routing loop
@DMVPRIDE1011 жыл бұрын
Where are you getting these numbers from
@vinaykumardisha12 жыл бұрын
i really loved these videos.
@tahersadeghi67736 жыл бұрын
A bit confusing here. You say next hop or next network. You did not set up the next router with the address that will be the next hop. where did you get 10.0,0,1?
@4rmplanet13 жыл бұрын
gr8 4 self-study student , again BIG ThankS
@iulianburlacu10 жыл бұрын
awesome ..best teacher ever :)
@Ghost5728 жыл бұрын
These are great, thanks for this.
@techdiverdown212 жыл бұрын
Fabulous videos. Thank you.
@rasiftahmid95048 жыл бұрын
I don't understand the 0.0.0.0 network?? Can anyone explain?
@jackhannah34648 жыл бұрын
Sure Rasif. The 0.0.0.0 is a meta-address and it's used to designate and unknown addresses in terms of IPV4. The server side sees this and thinks 0.0.0.0 means all IPv4 addresses on the local machine. So say a host has two IP addresses, one is 192.168.1.1 and the other is 10.1.2.1, the server listens to 0.0.0.0 it will be able to reach both of the IP addresses. If we're talking about routers then think of it this way: 0.0.0.0 is the default route, which basically means, "it's not on my local network, it must be somewhere else on the internet" Since the router doesn't have a table of the "the rest of the internet" it needs a way to forward information to the next hop. So basically it's a way to reference any IPv4 address at all and it's used when the the destination is not available/unknown. In terms of IPv6 you would see this "0.0.0.0" simply as "::" which is used with repeating numbers as a shortcut in IPv6. Make sense?
@vineesuyal51157 жыл бұрын
why don't u do configguration in cli???
@DarkDevilv212 жыл бұрын
Thanks! The videos help me for the exam :)
@kashifShaikh9168 жыл бұрын
loveyouuuuuu so awesome to understand it on your channel
@jafetlivano11 жыл бұрын
why i get requets time out with a try ñink pc 192.168.1.100 to server?
@yarweiss8 жыл бұрын
Fantastic videos, thanks1
@ARES2706198510 жыл бұрын
Great tuts, Thx v.m. ;), really helps
@MrLOUGOUVIET10 жыл бұрын
Yes!!! you are the best. Many thx
@mjfan1910011 жыл бұрын
Excellent!! Thank You Dan ^_^
@YanksOnTop10 жыл бұрын
That was great. Thanks
@MSKTechMate9 жыл бұрын
thanks Dan....!!!
@saskatana11 жыл бұрын
great tutorial !
@anjaneya212 жыл бұрын
Great tutorial
@vsaapw279910 жыл бұрын
Thanks a bunch Dan! I've always want to know how to configure on multiple routers and server with different ip addresses. I am going to replicate the same setup with real hardware.
@kalelna8711 жыл бұрын
No you can set the clock rate to whatever you want. he just set it at 56k as a example.
@AhmedMohamed-gy2ri12 жыл бұрын
Thanks Dan
@matzzz12345612 жыл бұрын
Excellent!! Thanks :)
@1234airows11 жыл бұрын
when ever i tried doing that i get %inconsitent ip and mask
@sispana11 жыл бұрын
very usefull..thank you...
@majedroben697611 жыл бұрын
thanx for helping me
@geo142313 жыл бұрын
good tutorial!
@adamciwinski40275 жыл бұрын
Damn I learnt more here than my college ; /
@ggxue6 жыл бұрын
every nice thank you
@codeninja73069 жыл бұрын
Thanks
@sylvesterkhaki47428 жыл бұрын
so helpfull
@leo-rq2ei7 жыл бұрын
thanks!
@TheSujithp12 жыл бұрын
thanks dude
@petersconfield11 жыл бұрын
I can't ping pc clients to server.........the rest part is ok...... C 10.0.0.0/8 is directly connected, Serial2/0 C 172.16.0.0/16 is directly connected, FastEthernet0/0 S 192.168.1.0/24 [1/0] via 10.0.0.1 S 192.168.5.0/24 [1/0] via 10.0.0.1
@burakerkutlu444711 жыл бұрын
thank you dan
@battsetseg041411 жыл бұрын
thank u ..! :)
@jafetlivano11 жыл бұрын
thanks aweosn tutorial i get the problem one number wrong :P