Router on a Stick Inter-VLAN Routing | CISCO Certification

[@pete-i7p]

These videos are life saviour, this Cisco semester I'm having a very bad teacher whose class is impossible for me to follow and he doesn't answer to questions so this material is really helping me.

[@TechAcad]

Glad you like it!

[@pete-i7p]

Could you explain how to configure management native vlan?

[@tahersadeghi6773]

@@pete-i7p Native VLAN is the default VLAN that comes with the switch. You do not need to configure it.

[@anabellemorales6970]

Seriously Pedro, sounds like your teacher shouldn't be teaching if he/she can't answer your questions. Worse yet, are you paying for these classes? If you are, I would request a refund. KZbin is literally full of free instruction by people who actually love to teach, like Tech Acad. With a book and channels like this you should be able to pass.

[@SenecaScott]

I've watched multiple videos doing this while doing it myself. This is the ONLY video that I actually used and git it to work. Sending multiple packets in different directions from different pcs aat the same time in simulation mode and all were successful. Thanks a Million Bro!!

[@smritisingh9828]

This tutorial has been really helpful in understanding VLAN, Inter-VLAN routing and router on a stick concept and configuration

[@TechAcad]

Glad it helped!

[@ziyathullahismail1502]

Thanks a lot for clearing many doubts not only in Router-on-a-stick, but also in basic switching in just 30 mins video.

[@TechAcad]

Glad to hear that

[@Sahalyare24]

I come to the right place at a right time ,my teacher was not good i’m glad to have this information thanks for helping me .

[@TechAcad]

Glad this video helped you out!

[@umamaheswari1410]

I fell in love with ur teaching...wow

[@TechAcad]

Glad to hear that...! And thanks for your great support and sharing my dear friend...!!!

[@Hasashi-k9q]

sussy

[@nathan_Eth]

Thank you, brother! I followed the tutorial and managed the configuration like yours! great tutorial in 30 mins...

[@TechAcad]

Glad it helped

[@mohammadumar6144]

Thank you Sir, it helped me a lot, Sir gave me the presentation about vlan, tomorrow, I will explain it! Accoriding to your point!

[@Compwib]

I like your way of step by step configuration of L3 switch

[@dipendrasnkr3629]

I'm from Nepal. The way of presentation is very nice sir. I completely understood the whole concept of inter -vlan routing. Thanks a lot sir !

[@TechAcad]

Thanks and welcome

[@zanGalant]

thank you for this guided exercise. it really helps in making me better understand the mechanics behind each protocol which is necessary when I will be designing my own simulated networks to test my own knowledge on the topics

[@TechAcad]

Glad it was helpful!

[@farhat647]

excellent work, a warm thankyu from australia. wish you all the best

[@TechAcad]

Thank you! Cheers!

[@creatively1430]

Very clear explanation thank you so much bro🥀❣

[@TechAcad]

So nice of you

[@FaxFLM]

Thank you, I speak spanish and I understood all perfectly, great video (sorry for my bad english)

[@TechAcad]

Glad I could help!

[@mr_master_10]

Thanks.There's so much in a single video.🖤

[@TechAcad]

Glad it helped!

[@kelechiemmanuel9967]

GOD in heaven bless you sir for this teaching

[@TechAcad]

Glad it helped. And thank you so much for your great support and sharing our channel with all your friends...!!!

[@mecachiedu8701]

You sir, are a life saver .

[@TechAcad]

Thank you so much my dear Friend for your great support...

[@mazidulislam2756]

Really valuable information

[@TechAcad]

Glad you liked it

[@riazhosain1093]

Thank you sir, Its very helpful for leaning cisco switching networking.

[@TechAcad]

You are most welcome And thanks for your great support and sharing with your friends...!!!

[@我が名はめぐみん-i8o]

Thank you so much for this video, it really helped me to understand about VLANs. Keep up with the good work!

[@TechAcad]

Glad it was helpful!

[@joaquinluceromusic]

wish to see it connected to the internet. Thank you Tech Acad

[@nilantharanatunge5215]

Excellent work

[@TechAcad]

Many thanks

[@Missdesigner_So]

This helped me for my assignment, thank you so much

[@TechAcad]

Glad it helped!

[@mdmasood8187]

wow sir good lecture

[@TechAcad]

Thanks for liking And thanks for your great support and sharing my dear friend!

[@GA-tl4iy]

THANK YOU SO MUCH,VERY GOOD VIDEO. THANKS AGAIN AND GOD BLESS, MIKE

[@TechAcad]

Glad you enjoyed it! And Thank you so much my dear Friend for your great support...

[@mcfahr3655]

You are a Fucking genius... I've watched loads of these videos now and I am crying with laughter each time. Keep doing what you're doing I haven't laughed this much since I was in high school. Just totally hilarious keep them coming

[@ОлжасСахабай]

thank you! i spend a lot of time to find some normal video with my topology =D

[@TechAcad]

Glad I could help!

[@thomasle8335]

Thank you for the steps you used to verify connectivity!

[@TechAcad]

Thank you so much my dear Friend for your great support...

[@sacerdoceroyalngl2204]

Thank you very much for this great lesson, you're the best. I need a video about call manager VoIP if possible. Thanks and all the best to you

[@TechAcad]

Glad it helped. And we will upload more videos in future. And thank you so much for your great support and sharing my dear friend...!!! If you wish to get any support, you can contact our team using our website.

[@JustGlennBE]

This helped me so much with understanding it and troubleshooting! Thanksss!

[@TechAcad]

Thank you dear Friend for your great support.....

[@mar4974]

Thanks a lot brother you saved my study!!

[@TechAcad]

Glad to hear that

[@willheckathorne3715]

This video saved my ass, thank you so much Tech Acad.

[@Hasashi-k9q]

thats so sussy

[@FATIMA-pe2fz]

THANK YOU SOOOOO MUCH this was very helpful

[@محمد-م5ث1ش]

Thanks for the explaniaton! it's more than good.

[@TechAcad]

Glad it was helpful!

[@tahersadeghi6773]

Great video. Clear explanation. Thank you very much.

[@Pobrez]

thank you so much! I've learned a lot from your videos this is very helpful.

[@TechAcad]

Glad it was helpful!

[@ShahzilImran]

Thank you for the clear explanation. I have a questions like if we make 4 sites similar to this one how we can make them communicate. by connecting them with routers or with switches. if through routers then how. Can you little explain.

[@glorychannel4365]

Very good video

[@TechAcad]

Thanks

[@YamaSaghar]

An absolute legend! Thank you! :)

[@TechAcad]

Glad it helped!

[@TakilaKaate]

Tq so much for your video sir

[@TechAcad]

So nice of you

[@jasongrivas1981]

You are the best!!! Many thanks from me!

[@TechAcad]

You are!

[@informatiqueForEveryOne]

THANK YOU SO MUCH. COULD YOU EXPLAIN ME WHAT ARE THE PURPOSE OF VLANS PLEASE?

[@oma_unashamed]

Thank you for this informative video. You just saved a life❣️

[@TechAcad]

Glad it helped!

[@Foodie_Vj]

Tq nice explaination

[@TechAcad]

So nice of you

[@gebreasfha4148]

Keep it up...

[@TechAcad]

Thank you, I will

[@asrali3045]

Great tuto bhai love it

[@TechAcad]

Glad it helped!

[@socratesdeleon7851]

Muchas gracias amigo. Que Dios te bendiga . Thank you very much friend. God bless you.

[@TechAcad]

Thank you so much my dear Friend for your great support...

[@fernandovasquez6172]

great video

[@TechAcad]

Glad you enjoyed it

[@raudelaguila]

Great! explaination.thanks so much

[@TechAcad]

Glad it was helpful! And thanks for your great support and sharing my dear friend...!!

[@JeanethPresto]

Thank you so much sir raymond kahit anong palit mo ng file name mahahanap namin yan

[@jesinthomas9015]

Great lesson learnt sir, can we do a inter vlan routing on a layer 3 switch?

[@TechAcad]

Yes we can

[@ataulaleemqureshi608]

Hallo,Thanks a lot for a wonderful video...really it helped me a lot i was trying to understand VLAN correctly more than 5 days coz preparing for my ccna test.....i shall be very thankful to you if you can just explain a bit what Trunk is?and another question instead of using S1,S2,S3,S4 can we just use S4?Thanks a lot once again

[@TechAcad]

Glad to hear that! If any doubt, you can contact our team.

[@paulodessa1]

thank you very much, some details were very useful for me

[@TechAcad]

Glad it was helpful!

[@KrzychVEVO]

Poland and भारत brother!

[@TauwinKul]

Hey Tech Acad, thank your for this great video. How do you place multiple devices with just one click?

[@TechAcad]

Hi Press ctrl button and then select the device you needed. So that we can add multiple number of devices. Thanks for your great support and sharing my dear Friend...

[@Genesyxx]

Great video!

[@TechAcad]

Thank you

[@fabio11386]

Hey, thanks for this kind of content! Really apreciated! I have one question. What could I do to make the computers to stop communicating between them on the same switch and different VLans but keep everything else the same? It's ACL a good starting point?

[@TechAcad]

Glad you like them! And yes, it is possible to create and apply ACL to the needed VLAN.

[@fabio11386]

@@TechAcad Nice, it's working. Thanks for the answer! I made it working by blocking communication between hosts one by one. Is there a way to make the VLAN1 deny packages from the VLAN2 without having to block the communication between hosts one by one as I did?

[@darthom]

@@fabio11386 did u figured it out? how did u do it? proxyarp?

[@borhanularif]

00:02 Configuring Router on a Stick Inter-VLAN Routing 05:28 Configuring VLANs and IP addresses for inter-VLAN routing. 08:58 Configuring VLANs and assigning ports to VLANs in Cisco networking 12:26 Configuring VLANs and assigning ports in CISCO networking 15:57 Configuring inter-VLAN routing and verifying VLAN configurations. 19:14 Configuring trunk ports for inter-VLAN routing 22:26 Inter-VLAN routing setup on Router R1 25:30 Configuring inter-VLAN routing on Router on a Stick 28:46 Configuring Router on a Stick for Inter-VLAN Routing

[@jomarie.o_0]

you saved me my friend! Thank You

[@TechAcad]

Glad to hear that!

[@E-LearningandEarningReception]

Thank u for clear confusion

[@BlackJaxxx]

I love your videos, thank you

[@100waysofexcersies3]

Love from Pakistan

[@Hasashi-k9q]

Bery good bery nice

[@TechAcad]

Many many thanks

[@aubtigerfan44]

I followed to the very end of the video step by step and some of my simple PDUs are not working. Any guesses where I could have gone wrong?

[@fizzexkemo6391]

Thank you for that clear explaination... but I have question can we do the same but with 3 switches instead of 4 and if yes can you tell me please what should I link together...which switch should be linked to the router and the links between the switches which switches need to be connected together... Would that work if we removed S4 and move the 3 PCs to S2 and how exactly

[@TechAcad]

We can design and implement it in different ways!

[@TechAcad]

You can contact us if any doubt!

[@haredibroomar3889]

Thank you so much sir

[@arunkarthi5994]

Very useful

[@TechAcad]

Thank you dear Friend. ........

[@kunapulilokesh77]

Is it possible to assign ip addresses to end devices (pcs) through dhcp service in Router?

[@rafi.khan18]

Best video ever. ❤️❤️❤️

[@livingstoneayo7910]

You save my day Sir.

[@TechAcad]

Glad it helped!

[@williamgupton8770]

very good

[@TechAcad]

I'm glad you enjoyed it!

[@andrenestares3729]

you saved me from my exam but I'm still not going to give you your like

[@imtod.1231]

Estudia sonso. ÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

[@ssbootyspanker9430]

Thanks for the great content!

[@dhakprasadupreti6249]

Good job, thank you so much.

[@TechAcad]

Glad it was helpful!

[@belshakatun4083]

Thanks a lot, Very Helpful

[@TechAcad]

Glad it helped!

[@usamazub]

Thank you sir!

[@TechAcad]

Thank you dear Friend

[@gouthami_pittala]

Thank you sooooooo much❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️😘

[@TechAcad]

You are so welcome!

[@TheAlexusr]

👌👌👌

[@king020588]

Thank you sir for this

[@getachewbabulo29]

thanx God blesss you sir

[@TechAcad]

So nice of you

[@MrTyomaAndMrKim]

Thank you! bro, you're the best!

[@TechAcad]

Glad it helped

[@venugopalkesavan623]

great one

[@TechAcad]

Glad it helped!

[@m.y.m401]

To the point!!!!!! thank you sir.

[@TechAcad]

Glad it helped

[@hoangvutechnology2985]

Thanks you very much

[@TechAcad]

You are welcome

[@andreefranco556]

Te amo

[@mohammedalialameri5381]

Great,Thank You

[@TechAcad]

Our pleasure!

[@edwardv4546]

Thank you!

[@TechAcad]

You're welcome!

[@bikashthapa5292]

Thank you brother for the video. One question, is it possible to allow multiple vlans from a single interface on a swtich?

[@TechAcad]

No, We cannot assign multiple VLANs to single interface. We can allow multiple VLAN using TRUNK in a single Interface.

[@julianadsouza8083]

Very nice👍

[@TechAcad]

Thanks a lot

[@MrSkaterview]

first of all, i lova you so much, second thanks

[@TechAcad]

You rock!

[@erikaandreasanchez3673]

Hello, your video was really helpful but my project required distribution switches and I selected 3560 but the communication stopped, I also add it one server and it doesn't communicate with the rest of the network, any ideas why??

[@neangsokleng1835]

good thank you

[@TechAcad]

Welcome 😊 And thanks for your great support and sharing with your friends...

[@runrunsomethings5229]

Awesome!

[@TechAcad]

Glad you think so!

[@heyjulyabas1681]

wow..so much thank you

[@TechAcad]

Glad you like it!

[@gopu6410]

perfect 👍

[@mouradbadri3225]

thank you so much ••••

[@TechAcad]

You're welcome!

[@roselynperalta239]

Thank you so much!

[@TechAcad]

Glad it helped!

[@RS-iq5ow]

Thank you.

[@TechAcad]

Glad it helped!

[@md.mahmudulhasan7698]

Hello... If i want to do this configuration with ipv6, what is the process ?

[@abdessamadmalki6065]

thank you men

[@TechAcad]

You're welcome