Dash swap a foxbody mustang? *HOW HARD IS IT*

[@BREW2LFOXBODY]

This is why I kept my stock dash....lol But I think you guys got this one!

[@roberttrevino267]

BREW2L when’s the next video?

[@jamesadams8705]

How can i send you a private message to you. I can give a friends name and fb. He did this to his car and more. You should check it out.

[@franciscogonzalezlara3302]

@@jamesadams8705 sent me a email [e-mail]

[@twportre8809]

But admit it ... doing a heater core in a fox with that top piece would be literally cake!!!!

[@OGStoneVegas]

I seen somebody on instagram not only do a coyote swap on his 5.0 GT foxbody, but he also swapped the s550 dash.... cleanest foxbody I ever seen

[@marcogonzalez946]

Do you know his instagram acount?

[@OGStoneVegas]

@@marcogonzalez946 instagram.com/p/Bo9qQcYlUiE/

[@josechavez0000]

Is it the white one with the red engine

[@OGStoneVegas]

@@josechavez0000 I don’t recall but it was an 87 notch I believe

[@hussainsvt9853]

I did sn95 on 1990 fox. It was a pain in ass. But I love how it turned out. Good luck with your swap.

[@CombsTowerProductions]

I really want to see this Dash Swap. I’ve heard all about them but never actually seen them

[@jameyrichardson8967]

Sn95/new edge dash swap SOOOOOO much easier and still an updated look

[@cgmf-d6t]

And still hideous

[@ndreyah1160]

@@cgmf-d6t thank you

[@thenegus5469]

@@ndreyah1160 elaborate

[@tutsudo3260]

Look up fox500 on youtube maybe he can give some pointers on how to install

[@Mr_Randall22]

I had a 93 coupe with this dash,console,shifter and seats in it. engine wise was a turbo 4cyl. Wish I had kept to show off the look someone did a good job on the swap everything worked.

[@thomasburr9244]

I drove a 93 cobra with full interior dash seats and all from a 95 mustang it was done amazing and looked and felt great

[@ChromolyCowboy]

What if you slide the seat back and use circle track floor mounted pedals?

[@mustangownercg1972]

I love the dash swap. Hope you guys get it done. S197 sure looks sweet, best dash for a fox.

[@bobbylininger5022]

really hope to see this happen, its an awesome idea. Will follow future videos and hope to see a good video series for s197 dash swap

[@marvingreen6644]

I'm doing a 2017 Corolla into a 77 nova, do I need to make a new fuse box? What all wires can i delete or can i use the wires I don't need for something else? Can I delete the airbag system since it has already been deployed and how do you deactivate the indicator light? Also, how can I marry the steering column together and have everything work?

[@shawngoff8290]

I personally like your gauges in stock dash. I like the way you set yours up keep up the good work

[@chrishotrod6603]

I had a friend of mine put a 66 mustang dash in my 87 coupe.

[@drjotting]

Cut it to tuck it in, it looks great in there, definitely fits body lines better than SN95!

[@jaysonescoe5799]

You can do ittttttt!!!! Rob Schneider water boy!! Lmao

[@twitch0matic]

You can do it!!!!! But I do wanna see what it takes for the s95 in the foxbody mustang I'm in the process of a complete 1998 sn95 motor, trans, kmember, and rear end, plus dash and door panels in my 1992 foxbody :/

[@nissanbrown6144]

Use the original dash

[@FoxcastMedia]

We may end up doing that...

[@house308]

You have to swap floor pans if you want it done right.

[@FoxcastMedia]

house308 Yeah I have seen it done that way, apparently for a reason! Lol

[@mikeyblaze3450]

Floor pans. ???

[@8t7_foxbody99]

I've only seen this once on KZbin and I believe the whole entire car floor and firewall was swapped from an sn197 to accommodate the shifter and for everything to fit as it would from the factory.

[@GearHead704]

The blue lighting in Philip is so cool looking.

[@LiquidSSSnake]

Yeah I agree with you on the SN95 dash swaps. Even the round dash in the New Edge cars makes me wonder other than manufacturing budget. The New Edge roof is questionably round, they didn't want to spend for new glass to be made.

[@jimkaray]

agree the s197 dash lines work with the fox better than the sn95dash does. fyi the 4.0L s197s use a T5 with the remote shifter design, just need GFroce internals for it to handle some power..

[@whiteerice9907]

I want to do a dash swap on my 90 gt but using the s550 dash

[@Gookness]

Whitee Rice same bro

[@whiteerice9907]

James Gideon it would be sick !

[@enjoythesho1992]

I always thought the s197 dash was one solid piece never knew you could remove the top panel

[@jeffsnyder2051]

a new edge dash will fit with some trimming by the windshield.

[@Theboostedhatch]

Trim the sides to get it back to the firewall

[@melvinharrison9138]

You have to use the undercarriage from the newer car from firewall to back seats to weld in!

[@justingriffith1370]

Last week it was in the upper 60's.... then it got cold and over the weekend we got about a foot of snow! But yeah, the dash would be cool, if you could make it work.

[@aspenyukon6845]

Foxbodys and sn95's had the best factory dash's...s197 steering wheel and dash look like they came straight out of a carnival bumper car :)

[@kiwianthony3878]

Have to trim Dash pad down and the Dash itself so that it fits far back I have a couple people u can contact that do this daily

[@justinfisher36]

The dash swap would look cool but with that little of room what's going to happen if they get in an accident? Would they lose their legs or even life

[@troymcgee7317]

Hey brother how can i get one of your Foxcast logo stickers for my foxbody

[@dylanjones1481]

Did you guys ever get it to work???

[@mikeyblaze3450]

Did you end up using this dash. I have an 86. I wanna use the 05 dash.

[@slugmouthtre6724]

Honestly I really want to see it done because I want to do it to mines but you know it’s up to y’all

[@fredstewart6478]

Next year when I do my 85 Fox body I'm going to try something similar however I'm going to use clay with the existing dash that's already there instead of trying to stitch one from up 06 model or some bullshit like that.

[@luisalmeida6524]

you know we need part 2 of this video right? 🤣haha so many questions I haven't stopped gathering parts so I'm not thinking how it will all fit but im doing a 2017 dash and full body harness. what ac blower did u guys use?

[@romero.4089]

Did you ever finish it?

[@UBUNTUmicanal]

Where did you buy the top panel? I broke mine and need one.

[@Road-LessTraveled]

Im looking to do this with my 87, we’ll see how far I get lol

[@chevyblue13]

Cream colored fox? I saw on a previous video you guys bought that cream colored fox with the electrical shutoff in the fuel door. Do you still have this car if so is it for sale?

[@HotRod9967]

if anyone can make this work ya'll can,go for it Bro !

[@Maria-hb3kc]

It look better than the old one try a ford focus I seen one swap it in a fox body.

[@scottshoemake7764]

You need to put Dover in the seat with the s197 dash. Ken is a little short, 🤣

[@FoxcastMedia]

Hahahhahh

[@SpeedAddict731]

😂😂😂

[@rawsko0316]

Six footers would probably work better for a test subject. Bless Ken's heart. I can hear the comebacks...."yeah, I'm short, but I'm a better Tech than you!!" Lol

[@SpeedAddict731]

501Bloo I’m 5’9” There are a lot of people shorter than me out there😂😂😂. Besides I don’t have a problem fitting in any car😎. Perks of not being tall.

[@quitreadingth1s4]

@@SpeedAddict731 lol short gang

[@levijohnson3128]

Anyone in this comment section know if I can swap a dash from 87-93 into an 85? I like the dash for the later foxbodys better and was wondering if it would be possible to swap

[@mustang-ricky3626]

is this possible on a new edge?

[@BigRockyD]

I wanna put an SN95 dash in my 82 while I have the car apart. Anyone know if it will be super difficult?

[@Arthurtv807]

Hey did you ever finish this swap?

[@keithmichaels7561]

Alright, I've been wanting to see videos like this. Thanks

[@dbix11]

i think seats are really the only thing worth swapping interior wise

[@marvingreen6644]

I'm doing my first dash swap, what all do I need to take out of the donor car for the electrical?

[@ndreyah1160]

Have at it: www.svtperformance.com/threads/project-coyote-notch-interior-swap-irs-ca-smog-legal.1036671/

[@mikedambowic5862]

GO FOR IT GUYS, YOU DO GOOD WORK ,SOO YES I LIKEY😎😎

[@UziMovie]

What about wiring?

[@erikturner5073]

I much prefer the SN interior swaps! The dual cockpit style is a really nice look along with the upgraded seats.

[@christopherhamilton4373]

Just saw a someone do a s550 interior swap

[@josephleonardi8977]

I'm thinking that should have been mocked up before paint!

[@gtkid7932]

Not a fan of that model dash. Seen a 15up swap was sick an a 03ish swap on fb group thats badass

[@briandubbeld5665]

It's looks like pretty cool like you it fits style better than an 95 dash hopefully you can make this happen looking forward to this dash install .it will just take some time and money and patience but I know you guys will figure it out you always do👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍

[@callmebird8798]

I really want to see this get done :)

[@sonnyzehm105]

So cut it down a little bit On the bottom side and cut it down a little bit on the top side you've Already got a mockup So far so good it looks great to me All you would have to do is cut the center part Bring it in just a little bit on the bottom side cut the topside to match the windshield And flayer in on the bottom side of th dash It's going to be a little bit of work but it can be done You're going to have to get a dash Repair kit If you know how to do bondo you can do a dash repair kit It's pretty much the same thing You mix it the same way you would mix bondo Put it on let it dry and sand it down the same way you would do bondo I know this because I had to repair the dash in my Bronco ll That I used to have

[@cesarsgarage1393]

Much rather keep my OG fox dash, especially if it's in black, nice idea tho

[@dirtytoxicdiesels4171]

Looking good man !

[@juanmolina19]

Go black stock or the grey it would match perfect wit the color of the car

[@lazarofarinas7243]

Try the 2014

[@povertyshop]

Still would've been nice for a full in depth video on this swap....m

[@bigbertha441]

Nope I'm doing the same dash swap in mines right now too!

[@FoxcastMedia]

How is your coming?

[@bigbertha441]

Just got the old dash pulled out! Going to start back on it this weekend. Looking like the back of the dash going to have to be trimmed down a few inches

[@mustang9551]

I’m putting a 98 Ford ranger dash in my 88 Fox I got similar problems with it being to low, but without glove box it fit with leg room and looks good need to make mount at this point

[@ndreyah1160]

The dash is gonna have to become slimmer and thinner. Facts: whatever tech wont be used needs to be removed from the dash (including the lower portions of both the driver and passenger side. To cover it all up you'll be needing to make yourself inserts for the open areas and gaps. At the day's end, you'll be chopping and trimming the life out of that dash...

[@starbrightpools]

AWESOME SHOP!!!!!!!

[@zapaerialproductions6897]

Why mess with the fox interior ?

[@MustangGuy6501]

Well i see its doable, but im glad i like my fox dash lol i know its going to be hard but it would be cool to see it done either way love the channel

[@damianroush9234]

I do too,but my dash is fuvked so I'm putting an sn 95 dash in cause fuck it

[@pdiddyfx]

What's ur email? I have a 94 with a complete s197 interior swap .maybe I can help u out .good luck brother.

[@sweens7014]

Hey I wanted you to do a bill for me. How do I contact you?

[@WinZard]

sn95 I think is the only thing that's gona fit

[@cwhall5430]

Thank God for interior pros

[@charlestonperkins6980]

I would do the dash swap would be worth the work would be different and unique

[@ndreyah1160]

www.svtperformance.com/threads/project-coyote-notch-interior-swap-irs-ca-smog-legal.1036671/

[@robertbairt9094]

Do SN95 👍

[@jasonpeters9478]

I put s197 seats in my fox

[@fourwheelerjock]

Use the OG dash. Better looking and a lot easier.

[@Gookness]

Sn95 with an s550 dash swap 🔥

[@ndreyah1160]

Yes!

[@4eyefox]

Anything can be done but you need to make best friends with a dremel and know how to weld plastic. It would look badass though. Good luck

[@gopherchucksgamingnstuff2263]

i have an 08 it looks like mine

[@jpp9846]

8 minutes in....that dash just ain't gonna be fun trying to install. Guess I shouldn't say "it won't work"...but man...what a project

[@tyler5.068]

That’s dash is way to low... if you get in a accident you can loose both of your legs!!

[@FoxcastMedia]

Yeah that is an issue for sure

[@ndreyah1160]

@@FoxcastMedia www.svtperformance.com/threads/project-coyote-notch-interior-swap-irs-ca-smog-legal.1036671/

[@ImChrisDuke]

awesome

[@USER-pv2gj]

Could have pushed the dash forward more

[@CodyDaCoyote]

Camera man: its been done. Just we have never done it. Other guy: yeah i think its doable. Well no shit Sherlock

[@eugeneowens82]

No highway head with that install........🤔🤔🤔🤔

[@grinch4om]

start over

[@kevinneves1796]

it looks deranged lol it needs to go in 5" and up sits way to low can it be done yes but its gonna take man hours to get it right

[@roycunningham3553]

Iv done it

[@robertrodriguez2416]

fox dash please

[@jenswojtek8034]

*puts fox body dash in an s197*

[@fredstewart6478]

I'd rather you're say, nope dude that will never work and then prove you wrong. Lol

[@johnalm9238]

Ball buster thu n thu

[@mustang9551]

The reason you can’t find videos on it is the same reason no one will find your maybe say your swapping a 06 dash in a 80s

[@fox-body]

Nice here in Florida. 🤷🏼‍♂️

[@FoxcastMedia]

I am on my way!

[@joseph650844ify]

Why

[@scottdilinger5920]

I like the original

[@fredstewart6478]

I've never screwed around with clay but I've been watching some videos on it and what the hell you never going to learn anything if you don't try it once. So people out there don't even wish me luck on this cuz it'll probably just going curse me and I'll fuck it all up.

[@InternetDude]

Not worth the effort!