DaYan TengYun v3 Unboxing and Sad Review

DaYan TengYun v3 Unboxing and Sad Review | SpeedCubeShop

Рет қаралды 9,967

Күн бұрын

Пікірлер: 77

@tryhardfighter1833 Жыл бұрын

Shawn: You don't have to outdo them, just make one that WORKS. Gan, dayan, moretry, diansheng: *Edges away Moyu: *Dancing in the corner

@purrrp6114 2 жыл бұрын

this is why I love the tornado v2 and v3 adjustments. especially the v3, no tool needed. Other than the annoying length of time it take to adjust the magnets and not being able to adjust the ctc magnets, the v3 is my favorite cube of all time

@thetrueblanket 2 жыл бұрын

My review: it's another cube

@familiezijlstra9601 2 жыл бұрын

LOVE THE VIDEO INTRO.........All of the best for 2023 HAPPY CUBING

@Kevin-qj7fp 2 жыл бұрын

i love the daiyan tengyun v1 because it turned quiet i wish i could have the gts3 with the ridges the proformance of the rs3m/wrm and the quietness of the daiyan tengyun v1 dont forget the maglev design cant forget that

@johnnyt8121 2 жыл бұрын

Hi, nice video, as always! I bought this cube two weeks ago and tried all kinds of setups and ended up using the orange nut. Although I enjoy the feeling of this cube, I agree Tornado V3 flagship is simply better.

@eternalrewind2190 Жыл бұрын

I had rhe gan with the adjustable screw and the different tensions but I had to super glue all them down because they wouldn't stay on..

@thesphyrth 2 жыл бұрын

When it comes to the Adjustment System, I always thought that the Tornado V2 learned from the TengYun V2's mistakes. Only the Magnet Carousel is arguably better. And in an ironic twist of fate, the TengYun V3 went the Valk Elite route.

@Neilios1000 Жыл бұрын

I bought this because it was half price. I am VERY new to cubing, but I have gotten my fastest time on this (lucky scramble) on its out-of-the-box settings. I did play with them to see if I could feel any difference, and I couldn't really. It's definitely looser, but that hasn't really changed the feel of it when solving, but that may be my newbie-ness. I put the green... uh... bits. I went from the whites to the oranges and felt nothing, then the greens. The only thing I seem to have introduced is some spring squeak on the blue face. I'm kind of pleased to know that it's adjustment system is baffling and unknowable, and it's not just me not knowing what I'm doing. While I seemingly can solve faster on this, I still prefer the feel of my QiYi Thunderclap.

@curiousNic 2 жыл бұрын

0:52 if you are soon making a video of all the major releases from 2023 you must be a time traveller ;) Looking forward to it and that was a relatable rant. Btw cool shirt and Happy New Year Shawn.

@cobra_bubbles1 2 жыл бұрын

Hey Shawn love your content by the way. I do have a request though… can you show us all your mains and how you have them set up and also give us your top recommendations. Can you also continue with your podcast please?

@SpeedCubeReview 2 жыл бұрын

I do miss the podcast

@WTF-Cubing 2 жыл бұрын

Hey Shawn! I look forward to the Mega Comparison every year, and this year there has been ONE question on my mind that no one has addressed. Are the Gan 13 pieces interchangeable with the 12 and 11? The 11 and 12 were, just wondering if the 13 follows suit. Thanks for another amazing year of cubing content, looking forward to another 😊

@SpeedCubeReview 2 жыл бұрын

I will check it out. I believe so, but not sure at the moment.

@WTF-Cubing 2 жыл бұрын

@@SpeedCubeReview You’re the man 😎

@botanicalcubes 2 жыл бұрын

I tried it and yes they are interchangeable

@DJ-Art-Morris Жыл бұрын

Damn that’s a shame, thanks for the review. Tbh I had no luck getting the v2 to perform well, it was fast, plastic was hard, and it was a very squared off cube. However it would corner twist during solves very easily and if you were to tighten the tensions enough to stop the inadvertent corner twists you’d lose all the speed. Not to mention a lot of ppl were having the a lot of ppl seemed to have an issue with the bottom inside wall of the centers breaking. I have a bunch of 3x3’s and the tenyun v2 will probably be my first and last dayan 3x3. The only hope I’m holding out for this brand is the dayan nezha 5x5 will be superior to my yj mgc 5x5.

@ramonconloscubosderubik.7601 2 жыл бұрын

My main is the Moyu Weilong WR Maglev.

@noamlindell4530 Жыл бұрын

is it quiet?

@eternalrewind2190 Жыл бұрын

The v2 is the smoothest puzzle.. but the tension system I didn't like because it was always to loss... Hopefully v3 feels as good

@christianpankhurst1740 2 жыл бұрын

Hello Shawn. Great t-shirt! 😃 Really interesting video - a very well considered and constructive critique. Looking forward to your review of the new MS cube comparing black and primary internals. Their advertising suggests there are differences (black being 'mature appearance. Feel the speed on every turn', while the primary boasts 'more texture, original and wild'.) Best wishes for a happy and wonderful 2023.

@Commander_ZiN 2 жыл бұрын

Yeah the GAN12 has tighter and looser reversed on it's different settings. It's my main cube and I can never remember because of this. It's setup now but every time I go to change it I get confused. It sorta makes sense depending on where the count the start for distance to the core, it might make more sense if every other cube didn't do it opposite previously. Edit: Yeah I get the GAN11 system was annoying, I instantly thought of it when I saw this cube. I much prefer the GAN 356 X or GAN12 systems, 11 was the worst. Even still once you have it setup you don't change it much, but that manual was the worst I'd seen. I also start by feeling the extreme adjustments by each setting one by one before I dial it in from loosest to tighter. Then I try dialing things out and in a bit one by one over time, eventually it's perfect and I never touch it. If my cube style changes, I'm probably on to a new cube anyway. Edit2: I really don't like screws, they're more finnicky to get perfect adjustments, having to count the number of turns etc. They also can strip and damage the core or wear it out over time. There's plenty of other systems that work perfectly for me without those draw backs. However screws are great in cheap cubes like the Kylin. Edit3: You have a strong bias for stiff cubes, at the end you complain about spring weakness and I think ooh that might be a good cube for me. I think as cubes get better the trend is for them to turn lighter and so changes the style and preferences of cubers. Manufacturers won't be following this trend for no reason, they see what sells. Older cubers have gotten used to tighter cubes, you're also a musician with strong hands. I'm biased to lighter cubes because I have muscle fatigue issues. See if you can get a little used to a light cube, try the lightest setting you can for a week and then try going a little lighter and keep it up for a month. Then go to and old cube and see if you now think it's too tight or just right still. It's a bit of an experiment you can try, at the very least you'll understand a bit more about what other cubers might like.

@phantomlakdude 2 жыл бұрын

sorry about the delay for the package but atleast came by but the cube is very good in my opinion based on first turns

@Allnight0911 2 жыл бұрын

GuHong v4?

@elliottwilliamson2560 2 жыл бұрын

Are the small corner cuts smooth? That’s an issue I had with the V2 along with the popping and torpedos breaking but I still enjoyed that cube quite a bit.

@OlgaFyodorova 2 жыл бұрын

I feel like this cube is late by a couple years. Gan got rid of those replaceable parts in 2021 with Gan 12. Moyu has a great and easy to use adjustment system since GTS 3M. QiYi made a numerical adjustment system without any replaceable parts in Tornado v2 and further improved on that in Tornado v3 which is toolfree. But this, in late 2022? No core magnets? Replaceable parts to change the distance? Come on Dayan. By the way, I'm so used to Gan numbers for distance and compression. Distance feels like it's measured in some units like mm: 0.6 is tighter than 0.8, 1 is tighter than 2, etc. The higher the number, the bigger the distance and the looser the cube. And compression increases with the number; 1 is the loosest, 5 or 6 is the tightest. I always stumble when I'm asked about my settings in the Tornado: is 1 the loosest or the tightest?..

@cubasticpoland 2 жыл бұрын

Can I make a Rubik's cube for the 60th anniversary of His Majesty's accession to the throne?

@fuseeyz8392 2 жыл бұрын

dayan tengyun which one is better v2 or v3 ?

@SpeedCubeReview 2 жыл бұрын

I would likely use the v1. The v2 is more like the v1 but slightly heavier and with more adjustment settings.

@fuseeyz8392 Жыл бұрын

@@SpeedCubeReview ty for recommend that help me a lot !💯

@Cubing_Burger 2 жыл бұрын

I really feel like manufacturers have just taken these adjustments too far. It's good to have more options in the cube you buy, but why does it have to be so complicated, and sometimes constricting? The only downside of a regular screw is that they might be a bit intimidating to new cubers, and the tensions aren't completely consistent. Now i don;t completely agree with this but there must be better solutions to this. The spring setting should also be way easier, just copy what moyu did with the gts3 and a lot of following cubes. It's easy to understand, can easily be done without tools (espacially if the design changes just a tiny bit) and gives you a lot of options. As for magnet setting, that could also be more consistent. The mechanisms of how it works are pretty good in general, but the notation of what is stronger or weaker is often complicated and something you have to remember. while the mechanism of the tornado v3 kinda sucks, since it requires a tool that easily breaks, they did the notation right by having + for stronger magnets and - for weaker settings. It's just so much more intuitive than numbers or whatever. I feel like cubing manufacturers could do a lot better if they stopped reinventing the wheel, and just used the best parts from different cubes.

@SlowerCuber 2 жыл бұрын

Screws for the win

@Flib_smmh 2 жыл бұрын

So in the end, did you try the orange core ? Just in case it is the tight one 😁 I didnt really get how the magnets works..it's in the feet ? 🤔

@SpeedCubeReview 2 жыл бұрын

I didn't try the orange as the green felt the exact same and I was exhausted. For the feet, there is a larger cylindrical magnet in the stalk of the corner. It gets moved up or down to move closer to other magnets in the bottom of the edge.

@Flib_smmh 2 жыл бұрын

@@SpeedCubeReview that's a weird idea, but why not ! As you say, trying to inovate too much... Thank's for the video ! Im disapointed, I had high hopes for this cube to fix the v2 😭 Happy new year sir, and see you in the mega comparison 🎉

@leibniz9834 2 жыл бұрын

Hey Shawn, please talk about FTO 😜 :) Happy New Year!

@SpeedCubeReview 2 жыл бұрын

😂 FTO is a thing

@Internetpilot Жыл бұрын

Sorry for the late view/comment, but settings aside, the reason I loved the DT v2 was because it was so smooth and silent. Now Dayan has made it crisp/clacky and then top it off with this bad new adjustment system? No thanks. I probably won't even try it.

@LyftyOfficial 2 жыл бұрын

Hi Shawn! For the mega comparison can you compare the gan 11 m pro to the xman v3?

@SpeedCubeReview 2 жыл бұрын

I'll certainly include the past Gan puzzles. Likely focus on the 13 since the others are going out of stock

@kavinkishorex-bi9477 2 жыл бұрын

@@SpeedCubeReview hi, I am planning to buy the tornado v3 standard. I have been using the rs3m 2020 for 6 months will it make any difference and is it worth it?? BTW love your videos.

@SpeedCubeReview 2 жыл бұрын

You will get the same times on both as well as any other modern cube. I depends on what you don't like about the feeing of the rs3.

@kavinkishorex-bi9477 2 жыл бұрын

@@SpeedCubeReview i am like getting bored with it that's why i like change my main

@kavinkishorex-bi9477 2 жыл бұрын

@@SpeedCubeReview Or would you recommend some other 3x3. which is under 20 dollars better than the rs3m 2020

@koobik9361 2 жыл бұрын

I CANT WAIT FOR THE MEGA COMPARISON THOSE ARE MY FAVORITE VIDEOS YEAHHHHHH. I think the perfect addition to the mega comparison would be the gts3m. Is it worth the price in 2022? I know its a very different cube to what we have now, and is it even something to consider nowadays? Edit: I think it would be good because it was all the rage, along with the wrm 2019, and now its the tornado v3, and the rs3m.

@SpeedCubeReview 2 жыл бұрын

Have you checked you old backpack? That's where min often gets lost

@koobik9361 2 жыл бұрын

@@SpeedCubeReview not gonna lie, i flipped my whole room over looking for that darn thing. i really hope it turns up in the near future. by the way, do you think Qiyi will come out with a coner-core magnet kit for their tornado v3, following some other companies which did the same thing?

@SpeedCubeReview 2 жыл бұрын

The tornado is already corner/core. I'm not sure if they would make a kit to turn the standard into the flagship.

@koobik9361 2 жыл бұрын

@@SpeedCubeReview that’s true. I have the standard and saw the corners have the same hole for magnets but no magnets there so thought it had potential.

@kemkem85 2 жыл бұрын

I think it is better if Dayan copied the system of Tengyun V2 into Tengyun V3. Like moyu,almost the cube nowadays doesn't use the screw. But moyu still used it. It gives unlimited screw depth. But the downside of this sometimes there's stripped core.